Study on calculation method of condensation heat transfer for non-azeotropic hydrocarbon mixtures in helically coiled tubes

Journal of Thermal Analysis and Calorimetry - We investigated the release behaviors and reaction reactivities of gaseous products during CO2 gasification of three chars (Guanghui char, Hongshagang...     

Synthesis and properties of temperature-resistant and salt-tolerant tetra-acrylamide copolymer

Abstract

The acrylamide copolymer with acrylamide as its main monomer is a modified polyacrylamide. In addition, the acrylamide copolymer is generally to dissolve or swell in water and can be used as thickener, dispersant, flocculant and so on. Therefore, using Acrylamide AM, 2-acrylamide-2-methyl propanesulfonic acid AMPS, dimethyldodecyl (2-acrylamidoethyl) ammoniumbromide AQ₁₂ and vinyltriethoxysilane VTEO as raw materials so that a series of four-membered acrylamide copolymers are prepared in aqueous solution polymerization. The amphoteric structure in the polymer has a unique anti-polyelectrolyte behavior when it is electrically neutral, which can significantly improve the salt resistance of the aqueous polymer. In addition, the hydrolysis of the vinyltriethoxysilane containing silicon structure by hydrophobic association can improve the temperature resistance of the polymer. The optimal reaction conditions were determined by orthogonal experiment: the reaction temperature was 10?°C; the initiator concentration was 0.05?mol%; the monomer concentration was 25?wt% and the pH was 7. Properties of polymer solution indicated that the series of tetra-copolymer possessed salt-tolerant and heat-resisting performances. As an oil displacing agent, it can significantly improve the efficiency of oil displacement, and particularly highlights the effect of 4-member copolymer as an oil displacing agent.     

Development of a magnetic solid‐phase extraction coupled with high‐performance liquid chromatography method for the analysis of polyaromatic hydrocarbons

A novel magnetic solid phase extraction coupled with high‐performance liquid chromatography method was established to analyze polyaromatic hydrocarbons in environmental water samples. The extraction conditions, including the amount of extraction agent, extraction time, pH and the surface structure of the magnetic extraction agent, were optimized. The results showed that the amount of extraction agent and extraction time significantly influenced the extraction performance. The increase in the specific surface area, the enlargement of pore size, and the reduction of particle size could enhance the extraction performance of the magnetic microsphere. The optimized magnetic extraction agent possessed a high surface area of 1311 m²/g, a large pore size of 6–9 nm, and a small particle size of 6–9 μm. The limit of detection for phenanthrene and benzo[g,h,i]perylene in the developed analysis method was 3.2 and 10.5 ng/L, respectively. When applied to river water samples, the spiked recovery of phenanthrene and benzo[g,h,i]perylene ranged from 89.5–98.6% and 82.9–89.1%, respectively. Phenanthrene was detected over a concentration range of 89–117 ng/L in three water samples withdrawn from the midstream of the Huai River, and benzo[g,h,i]perylene was below the detection limit.     

Synthesis of mesoporous zeolite single crystals with cheap porogens

Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals have been successfully synthesized by adding soluble starch or sodium carboxymethyl cellulose (CMC) to a conventional zeolite synthesis system. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption analysis, ²⁷Al magic angle spinning nuclear magnetic resonance (²⁷Al MAS NMR), temperature-programmed desorption of ammonia (NH₃-TPD) and ultraviolet-visible spectroscopy (UV-vis). The SEM images clearly show that all zeolite crystals possess the similar morphology with particle size of about 300 nm, the TEM images reveal that irregular intracrystal pores are randomly distributed in the whole crystal. ²⁷Al MAS NMR spectra indicate that nearly all of the Al atoms are in tetrahedral co-ordination in ZSM-5, UV-vis spectra confirm that nearly all of titanium atoms are incorporated into the framework of TS-1. The catalytic activity of meso-ZSM-5 in acetalization of cyclohexanone and meso-TS-1 in hydroxylation of phenol was also studied. The synthesis method reported in this paper is cost-effective and environmental friendly, can be easily expended to prepare other hierarchical structured zeolites.     

τ质量测量方案的Monte Carlo研究

在τ质量实验测量之前对多种测量方案进行了细致的Monte Carlo研究,并进行了比较.确定τ质量测量实验采用最大似然法,并给出可能的测量精度.研究了包括探测效率、束流能散等诸多因素对实验的影响,同时对实验的实现提出要求.     

储存环内电子冷却过程模拟

考虑储存环内离子的横向振荡和纵向振荡的运动特性,模拟了HIRFL-CSR内重离子束的电子冷却过程.给出了离子束的横向发射度和纵向动量散度随时间连续变化的图象,由此分析了电子束的空间电荷效应,冷却段色散函数和横向电子束温度对冷却过程快慢的影响.     

基准光栅重构傅里叶变换轮廓术

应用傅里叶轮廓变换术进行三维形貌测量中,为了获得待测物体的高度相位信息,通常需要采集两幅图像.因此当光学系统发牛变动时,必须重新采集基准光栅图像,不利于快速测量.提出一种从变形光栅图像中获取基准光栅图像信息的测量方法.首先在变形光栅图像中记录基准光栅信息,然后通过傅里叶分析提取基准光栅频率信息,通过图像分析获得基准光栅相位信息,最后重构出一幅完整的基准光栅图像,实现三维物体形貌测量.实验结果验证了该方法的可行的.     

单宁酸/两性离子改性油-水分离膜的制备及性能

以不锈钢网为基材, 利用单宁酸对不锈钢网进行表面预处理并功能化接枝两性离子基团, 制备了新型亲水和水下超疏油的单宁酸/两性离子改性油-水分离膜(TA-ZW-SSM). 利用X射线光电子能谱仪(XPS)、 扫描电子显微镜(SEM)及接触角测量仪等表征了其化学结构、 形态和润湿性. 研究结果表明, 两性离子基团通过化学键接枝在单宁酸预处理的不锈钢网表面. 油-水分离实验结果表明, 对于不同类型的油-水混合物, 本文制备的超亲水和水下超疏油特性的TA-ZW-SSM可实现重力驱动的高效油-水分离, 并具有较好的化学稳定性及再循环性.