GaN半导体中InN量子点的结构性质

采用第一性原理模拟计算纤锌矿结构GaN半导体中InN量子点的结构性质。建立64和128个原子的超原胞量子点模型,进行结构优化以获得稳定的吻合实际的系统,并模拟分析电子结构。从态密度空间分布图看到不同轴向的量子势阱形状各异、深度不一,说明量子点的限域效应存在着各向异性的特点。c轴极化方向引起量子点结构带边的弯曲形状与传统的量子阱结构不同,使得电子空穴没有发生空间分离,有利于电子空穴的跃迁几率的提高。     

Plant-Derived Molecule 4-Methylumbelliferone Suppresses FcεRI-Mediated Mast Cell Activation and Allergic Inflammation

Mast cells (MCs) are an important treatment target for high-affinity IgE Fc receptor (FcεRI)-mediated allergic diseases. The plant-derived molecule 4-methylumbelliferone (4-MU) has beneficial effects in animal models of inflammation and autoimmunity diseases. The aim of this study was to examine 4-MU effects on MC activation and probe the underlying molecular mechanism(s). We sensitized rat basophilic leukemia cells (RBLs) and mouse bone marrow-derived mast cells (BMMCs) with anti-dinitrophenol (DNP) immunoglobulin (Ig)E antibodies, stimulated them with exposure to DNP-human serum albumin (HSA), and then treated stimulated cells with 4-MU. Signaling-protein expression was determined by immunoblotting. In vivo allergic responses were examined in IgE-mediated passive cutaneous anaphylaxis (PCA) and ovalbumin (OVA)-induced active systemic anaphylaxis (ASA) mouse models. 4-MU inhibited β-hexosaminidase activity and histamine release dose-dependently in FcεRI-activated RBLs and BMMCs. Additionally, 4-MU reduced cytomorphological elongation and F-actin reorganization while down-regulating IgE/Ag-induced phosphorylation of SYK, NF-κB p65, ERK1/2, p38, and JNK. Moreover, 4-MU attenuated the PCA allergic reaction (i.e., less ear thickening and dye extravasation). Similarly, we found that 4-MU decreased body temperature, serum histamine, and IL4 secretion in OVA-challenged ASA model mice. In conclusion, 4-MU had a suppressing effect on MC activation both in vitro and in vivo and thus may represent a new strategy for treating IgE-mediated allergic conditions.     

高酸位多级孔超稳Y型沸石的制备及催化性能

以表面活性剂十六烷基三甲基溴化铵(CTABr)为模板剂,在水热体系对水蒸气处理后的超稳Y型(USY)沸石进行晶化处理,获得高酸量和高水热稳定性的USY-c-w样品。利用X射线衍射、扫描电子显微镜、透射电子显微镜、固态核磁共振、N₂吸附-脱附、NH₃-程序升温脱附、傅里叶变换红外光谱及吡啶红外对所制备催化剂的物化性质进行详细表征。选用1,3,5-三异丙苯(TIPB)催化裂化作为探针反应,研究制备的催化剂的催化性能,并与工业USY沸石进行对比。结果表明,再次水热晶化后,样品的硅铝骨架局部重构,非骨架铝重新进入沸石骨架,合成样品的硅铝比(n_Si/n_Al)由10降至3.0;再晶化后的USY沸石,不仅具有丰富的介孔结构,并且具有更多的弱酸和中强酸位点。在TIPB裂解反应中,再晶化后的USY沸石表现出比原样品更优异的催化性能。     

Thermal stress reduction of GaAs epitaxial growth on V-groove patterned Si substrates

We investigate the thermal stresses for GaAs layers grown on V-groove patterned Si substrates by the finite-element method. The results show that the thermal stress distribution near the interface in a patterned substrate is nonuniform,which is far different from that in a planar substrate. Comparing with the planar substrate, the thermal stress is significantly reduced for the Ga As layer on the patterned substrate. The effects of the width of the V-groove, the thickness, and the width of the SiO₂ mask on the thermal stress are studied. It is found that the SiO₂ mask and V-groove play a crucial role in the stress of the Ga As layer on Si substrate. The results indicate that when the width of V-groove is 50 nm, the width and the thickness of the SiO₂ mask are both 100 nm, the Ga As layer is subjected to the minimum stress. Furthermore,Comparing with the planar substrate, the average stress of the Ga As epitaxial layer in the growth window region of the patterned substrate is reduced by 90%. These findings are useful in the optimal designing of growing high-quality Ga As films on patterned Si substrates.     

[SiNi(H2O)W11O39]6-多层组装膜修饰电极及其电化学行为

采用电化学生长法制备包含杂多酸[SiNi(H2O)W11O39]6-(SiNiW11)和聚合物阳离子PDDA的多层膜修饰电极, 利用循环伏安法研究其电化学行为、 pH的影响及其对BrO3-和NO2-体系还原的电催化性能;并对多层膜电化学过程机理进行了初步探讨. 结果表明: 多层膜的增长均匀, 峰电流随层数的增加而增加;多层膜的峰电流随扫速的增加而增加;还原峰的峰电位随pH的增加而负移.     

折光率法确定R141b的两组分溶液组成

应用阿贝折射仪测量液体的折光率以确定其组成是化工生产与科研中常用的一种手段.在5～30 ℃范围测定了R141b与THF、乙醇及甲醇构成的两组分溶液的折光率,结果表明组成与折光率之间呈线性关系,其相关系数均在0.995以上,标准偏差均在0.0015以下,且实验值与文献值相符.该方法完全适合用于R141b相关溶液常温下组成的测定.     

I2界面修饰对全无机CsPbBr3钙钛矿太阳能电池性能的影响

通过在 CsPbBr₃薄膜上旋涂一次 I₂的异丙醇溶液以修饰 CsPbBr₃吸光层,钝化 CsPbBr₃层表面缺陷,改善 CsPbBr₃薄膜形貌。同时通过利用环境友好的绿色溶剂水溶解 CsBr,显著提高了其溶解度,减少了旋涂次数,简化了电池制备流程。实验结果表明,在CsPbBr₃钙钛矿太阳能电池(perovskite solar cells,PSCs)中,使用5 mg·mL^-1 I₂的异丙醇溶液界面修饰的器件具有最佳光伏性能,其最高开路电压(open-circuit voltage,V_OC)为1.55 V,短路电流密度(short circuit current density,J_SC)为7.45 mA·cm^-2,填充因子(fill factor,FF)为85.54%,光电转换效率(photoelectric conversion efficiency,PCE)达到了9.88%。     

竖壁传热对方腔内Benard对流的影响

本文采用具有QUICK差分格式的SIMPLE算法对边界竖壁传热的方腔内空气Benard对流进行了数值计算,根据计算结果探讨了竖壁传热对Benard对流的影响.计算表明,在所考虑的几何和物理条件下,所有竖壁绝热时,腔内流体形成平行与短轴的多个涡卷;竖壁存在传热时,腔内流体形成平行于长轴的两个涡卷,并且平行于长轴竖壁的传热热流方向相反时,涡卷的旋转方向也相反;垂直于长轴蛏壁的传热对近壁附近的流动有一定影响.     

太阳能甲醇分解吸收-反应器研制与实验研究

利用中温太阳能为甲醇分解的吸热反应供热,可以将中温太阳能转化为合成气燃料的化学能,同时提高燃料热值和太阳能的可用性,还可以实现太阳能与化石燃料的互补.本研究提出了太阳能热化学系统的一体化设计原则,建立了综合考虑太阳能集热、反应动力学和反应器结构参数的太阳能甲醇分解反应器的理论分析模型,并首次研制了5 kW热功率的抛物槽式太阳能甲醇分解一体化实验装置.太阳能甲醇分解的实验结果表明太阳能集热器可以为甲醇分解提供200～300 ℃的反应温度,在辐照300～800 W/m2,甲醇进料量为0.5～4l/h条件下,甲醇转化率可以达到50%～95%,投射到吸收-反应器上的太阳能转换为燃料化学能的效率可以达到30%～60%,具有良好的甲醇分解和太阳能转换性能.研制的实验装置体现了一体化设计特征,同时理论分析结果与实验结果也具有很好的一致性.本文研究成果将为开拓太阳能与化石能源互补的能量系统提供理论支撑和实验数据.     

DSB显著提高羧酸盐驱油体系抗钙镁离子能力的研究

测定了工业品级的天然混合长链烷基羧酸盐(SDC)以及与3-(N,N-二甲基十二烷基胺)-2-羟基-丙磺酸(DSB)复配驱油体系的界面张力(ITFmin), 分别得出其抗钙镁离子的能力为400和5000 mg/L. 选择试剂级十二烷基羧酸钠与DSB复配, 测定了不同配比溶液的表面张力值和临界胶束浓度cmc, 结合长链烷基脂肪酸与钙离子的溶度积Ksp, 分析了对不溶性长链烷基羧酸盐形成的影响. 根据现场驱油体系配方, 计算了两者在溶液中的摩尔配比为4:1时的十二烷基羧酸盐在胶束中的摩尔分数xm1为0.51, 相互作用参数βm值为-3.11, 反映了两者有较强的相互作用. 采用量子化学方法, 对由1个十二烷基羧酸分子、1个DSB分子及1个二价钙离子组成的模型复合物进行了能量计算和电荷分布计算, 得出在长链烷基羧酸盐和DSB两者混合胶束的界面层中存在负电荷空穴, 提出二价金属离子被络合的模型, 合理地解释了实验事实.