Thermal calcium atom interferometer comprised of three copropagating traveling laser beams

Received: 24 March 1998/Revised version: 2 June 1998     

Investigation of neutron deficient Zr and Nb nuclei with heavy ion induced compound reactions

³²S and¹²C induced compound reactions on Fe, Ni and Se targets have been used to produce neutron deficient nuclei in the mass region 84≦A ≦87. In-beamγ-ray spectroscopy consisting of the measurement of excitation functions,γγ coincidences andγ-ray angular distributions has been performed. The following level energies and spin-parity values have been deduced:⁸⁴Zr: 540 keV, 2⁺; 1262.8, (4⁺); 2137.2, (6⁺); 3089.2⁸⁶Zr: 751.9, 2⁺; 1666.6, (4⁺); 2670.0, (6⁺); 2705.5, (5); 3271.3; 3298.5, (8⁺); 3423.5, (7); 3531.5, (10⁺); 3645.9; 4326.1; 4417.3 Half-lives and energies ofγ-rays from the residual activities have been measured. The existence of three new isotopes could be established by their radioactive decay:⁸⁴Nb(12±3 s)→⁸⁴Zr⁸⁶Nb(80±12 s)→⁸⁶Zr⁸⁷Mo(14.6±1.5 s)→⁸⁷Nb→⁸⁷Zr     

Quick analysis of baicalin in Scutellariae Radix by enzyme-linked immunosorbent assay using a monoclonal antibody

To establish an immunoassay for baicalin (BA), a hybridoma cell line (9D6) secreting a monoclonal antibody (MAb) against BA was prepared by cell fusion with splenocytes derived from a mouse immunized with BA-bovine serum albumin (BSA) conjugate and a myeloma cell line, SP2/0-Ag14. MAb 9D6 shows specific reactivity against BA and its aglycone, baicalein, but not against other natural products. We developed an enzyme-linked immunosorbent assay (ELISA) using MAb 9D6 in a competitive manner, ranging from 200 ng/mL to 2 μg/mL. After validating the developed ELISA on the basis of intra- and inter-assays and a recovery experiment, it was found that the ELISA was not only simple, but also sufficiently reliable and accurate for quality control of Scutellariae Radix. It allowed determination of BA in complex and mixed materials, such as Kampo medicines.     

An enzyme-linked immunosorbent assay for aconitine-type alkaloids using an anti-aconitine monoclonal antibody

3-Succinylaconitine was conjugated with bovine serum albumin (BSA) for use as an immunogen for the preparation of a monoclonal antibody (MAb) against aconitine (Aco). Splenocytes from mice immunized with the Aco-BSA conjugate were fused with an aminopterin-sensitive mouse myeloma cell line, P3-X63-Ag8-653, and a hybridoma secreting a MAb against Aco was successfully obtained. The MAb cross-reacted with mesaconitine, hypaconitine and jesaconitine, which are Aco-type alkaloids, but not with any other compounds examined. The full measurement range of an enzyme-linked immunosorbent assay (ELISA) developed using the new MAb extended from 100 ng mL⁻¹ to 1.5 μg mL⁻¹ of Aco. The concentrations of Aco-type alkaloids in various Aconiti radixes assayed using the new ELISA method showed good agreement with previous reports.     

One-dimensional focusing of an atomic beam by a flat reflector

One-dimensional focusing of an atomic beam from a flat reflector is experimentally demonstrated. Focusing occurs because gravity changes the momentum transfer perpendicular to the surface depending on the height of the reflecting point. Theoretical analysis shows that, for a certain parametric range, diffraction-limited focusing of an atomic beam is possible. PACS 03.75.Be; 03.75.-b; 34.50.Dy; 32.80.Pj     

Synthesis of a rare‐metal adsorbing polymer by three‐component polyaddition of diamines,carbon disulfide,and diacrylates in an aqueous/organic biphasic medium

Three‐component polyaddition of diamines, carbon disulfide (CS₂), and diacrylates in an aqueous/organic biphasic medium produced a polymer capable of adsorbing rare metals. By using a 1:1 mixture of toluene and H₂O, the polyaddition reaction of 1,3‐di‐4‐piperidylpropane (1), CS₂, and 1,6‐hexanediol diacrylate (2) proceeded efficiently in the presence of Et₃N to produce a poly(dithiourethane‐amine) with a high proportion of dithiourethane units almost quantitatively. Quantitative formation of 1‐CS₂ adducts in the aqueous phase was followed by efficient reaction with diacrylate at the biphasic interface. The resulting poly(dithiourethane‐amine) adsorbed Pd(II) and Pt(IV) efficiently under acidic conditions due to the high affinity of thiocarbonyl sulfur atoms for soft metal ions. The polymers showed highly selective adsorption of Pd(II) from a mixture of metal ions [Pd(II), Cr(III), Cu(II), Fe(III), Mn(II), Pb(II), and Zn(II)], indicating their potential utilization for selective recovery of rare‐metals. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Fabrication of compositionally graded thin films by gravity-assisted pulsed laser ablation

A compositionally graded thin film of FeSi₂ was fabricated by a gravity-assisted pulsed laser ablation (GAPLA) system. By this method, a compositionally graded structure was successfully produced under a gravity field of 5400 G. We demonstrate that the atomic fraction of Fe, the heavier component of the thin film measured by scanning electron microscope/energy dispersive X-ray (SEM-EDX), showed increasing spatial distribution with the direction of gravity. We found that optimal laser fluence exists to give a thin film having the largest possible spatial compositional gradient. We found that surface energy density on the substrate surface is the key parameter to control the composition distribution. Furthermore, the ratio of Fe/Si of the film did not match that of the target. This result shows that the Si component is selectively etched during the film-forming process. Relatively high laser fluence as well as a very narrow space between the target and the substrate are essential to etch the film once it is deposited, in order to re-ionize and etch Si selectively while gravity accelerates both Fe and Si particles to the direction of gravity. We hypothesize that this process accounts for both the change in the stoichiometry and the formation of composition distribution.     

Optical emission spectroscopy of thin film fabrication by pulsed laser ablation under high-gravity

We carried out the thin film deposition of iron silicide by pulsed laser ablation (PLA) on a sapphire substrate, which was placed on a high-speed rotating titanium disk. The deposited thin film exhibited a continuous composition gradient. We investigated how the continuous composition gradient was attained, because the strength of the gravity field in our experiment was far below that in the experiment on bulk crystalline compounds. In the present study, we obtain the spatial distribution of several species in the PLA plume of FeSi₂ by using an intensified charge-coupled device (ICCD) camera.     

Compositional dependence of the valency state of Cr ions in oxide glasses

Absorption spectra of Cr ions in multi-component oxide glasses melted in Ar were measured. The integrated extinction coefficient is used as a parameter to analyze the redox reaction of Cr³⁺ and Cr⁶⁺ in glass samples. The relative content of Cr⁶⁺ increased and that of Cr³⁺ decreased with increasing basicity in silicate and borate glasses; this result is consistent with previous studies. On the contrary, only Cr³⁺ exist in phosphate glasses. Cr⁴⁺ ions were found only in aluminate, gallate and alumino-silicate glasses with modifier contents ≥ 60 mol%. The relationship between point defects and Cr⁴⁺ formation is examined on the basis of electron spin resonance measurements. We concluded that the superoxide ion radical (O₂⁻) and the peroxy bonding (-O-O-) oxidize Cr³⁺ to Cr⁴⁺ in aluminate, gallate, and alumino-silicate glasses.