水中溶解氧的微量滴定

将微量滴定技术应用于常规的碘量法测定水中溶解氧。在实验中采用了WD-CO3型微量滴定装置，并使用自行设计制成的高精度微量移液管（移液的体积可准确至0．001mL），作为转移标准溶液及试样溶液的工具。对微量滴定及微量移液与常量滴定和常量移液作了对比试验，结果表明两者的分析结果完全吻合，微量滴定（其中包括微量移液）所得结果的精密度也在定量分析允许范围之内。由此，微量滴定技术应用于水中溶解氧的日常分析的可行性得到了验证。     

钢筋混凝土旧工业厂房结构加固方案优选

当前人们选择旧工业厂房结构加固方案效率低下,且所考虑的因素较为片面,为了全面、高效地解决这一问题,通过综合考虑安全性、经济性、时间性、可行性和适用性等因素,以加固效果显著的工程案例为标准,以全面的18个参数为评价指标,构建了一种基于蛛网面积相似和形状相似的结构加固方案优选模型。该模型中首先运用熵权法确定18个指标权重,并将参数值归一化处理,随后运用Python计算蛛网结构相似度,检索出与目标范例最为相似的源范例。最后以结构加固效果显著的工程为例,验证了该模型能有效减少主观误差,具有较强的实用性,并以此模型优选出了某轧钢厂房结构加固方案。     

Phase Selectively Soluble Dendritic Derivative of 4-(Dimethylamino)- pyridine: An Easily Recyclable Catalyst for Baylis-Hillman Reactions

Among the reactions in which C-C bonds are formed, the Baylis-Hillman coupling of aldehydes with α, β-unsaturated carbonylic compounds is currently attracting much interest due to the atom economy, the mild conditions and the generation of functional groups1,2. Furthermore, compared to the Heck, Suzuki and other palladium catalyzed C-C bond forming reaction3, the Baylis-Hillman reaction can be promoted by using organic bases in the complete absence of any metal4. However, almost all the …     

Controllable self-assembly of parallel gold nanorod clusters by DNA origami

We demonstrate the self-assembly of three types of parallel gold nanorod clusters using a rod-like DNA origami as the template.     

一种新型双亚胺吡啶铁系催化剂的乙烯低聚研究

线性α 烯烃广泛地应用于洗涤剂、增塑剂、润滑油等精细化学品的合成以及作为共单体制备线性低密度聚乙烯 (ＬＬＤＰＥ) .目前工业上主要是应用ＳＨＯＰ法[1] 、Ｃｈｅｖｒｏｎ工艺和Ａｍｏｃｏ工艺[2 ] 通过乙烯低聚制备 .近些年发展起来的新型高活性后过渡金属乙烯低聚催化剂能够高选择性地制备线性α 烯烃[3 ,4] .Ｂｒｏｏｋｈａｒｔ等[4] 的研究表明 ,对于双亚胺吡啶铁系乙烯聚合催化剂而言 ,配体上苯基的邻位取代基位阻减小可以实现乙烯低聚 ,并具有高活性、高选择性以及理想的低聚产物分布 .本文的工作是从配体的空间位阻效应对催化剂…     

Synthesis of Highly Porous Organic/Inorganic Hybrids by Ambient Pressure Sol-Gel Processing

This paper reports the synthesis of highly porous organic/inorganic hybrids by a two-step acid-base catalyzed sol-gel process and ambient pressure drying. In the method organic and inorganic precursors are copolymerized so as to incorporate organic ligands into the solid network. The two-step acid-base catalyzed process was used to prevent phase segregation during the hydrolysis and co-condensation of organic and inorganic precursors. The organic ligands incorporated into the solid gel network modify the surface chemistry. Thus, the wetting angle is significantly increased so that the collapse of the gel network is greatly reduced upon the removal of pore fluid during drying. Organic/inorganic hybrids with BET surface areas above 1250 m2/g, porosities above 75% and pore sizes of 8 nm have been synthesized.     

Anti-solvent assisted treatment for improved morphology and efficiency of lead acetate derived perovskite solar cells

An efficient solution-processable route employing Pb(Ac)₂ as lead source and anti-solvent treatment to achieve fully covered and homogenous perovskite films is reported.     

An evaluation of the performance of porous polymer monolith assisted electrospray

A novel electrospray interface, which has distinct advantages over conventional pulled silica emitters, has been developed. This novel interface can be easily fabricated by forming a porous polymer monolith (PPM) at the end of a fused-silica capillary that facilitates a stable electrospray over a wide range of flow rates with only a modest increase in back-pressure. A comparison was made between the PPM-assisted electrospray and a commercial nanosprayer in terms of sensitivity, stability and robustness. A PPM-filled electrospray tip produced a day-to-day signal variation of 23% relative standard deviation (RSD) over a 3-day period when spraying a 1.0 microM test peptide solution. Furthermore, three different capillaries fabricated by the same process produced a signal variation of 17% RSD, indicating that the fabrication process shows good reproducibility. The multiple flow paths of the PPM function to split the flow and reduce clogging. Even following the accumulation of debris after prolonged use, a stable spray could still be generated with the PPM-filled capillary while the commercial nanosprayer ceased to function properly. In terms of sensitivity, PPM-assisted electrospray showed an enhancement in sensitivity at infusion flow rates between 100 to 1000 nL/min while commercial nanosprayers performed slightly better at flow rates below 100 nL/min. A sample purification step can be combined with the PPM-assisted sprayer, using the PPM as a stationary phase to desalt and preconcentrate samples prior to mass spectrometric detection.     

ON A CLASS OF METHOD FOR SOLVING PROBLEMS WITH RANDOM BOUNDARY NOTCHES AND/OR CRACKS(Ⅱ) COMPUTATIONS FOR BOUNDARY NOTCHES

This work is a continuation of the discussion of [1], On a class of method for solving problems with random boundary notches and/or cracks, (I) by C. Ouyang (Appl. Math. & Mech., vol. 1, No. 2, 1980). Here computations for boundary notches are made by using the theory and formulas presented in [1]. In the computation modification is also made for the boundary conditions in parametric plane in [1]. Numerical results for examples show that within ranges of parameter considered in the paper, for example L, the present method in quite workable in practical computations.     

catena‐Poly[[tetra­aqua­manganese(II)]‐μ‐4‐(carboxyl­ato­methyl­sulfanyl)­phenoxy­acetato]

The title compound, [Mn(C₁₀H₈O₅S)(H₂O)₄]_n, a one‐dimensional manganese(II) complex comprising helical chains bridged by 4‐(carboxylatomethylsulfanyl)phenoxyacetate ligands has been characterized by single‐crystal X‐ray diffraction analysis. Hydrogen‐bonding inter­actions between adjacent chains extend the complex into a three‐dimensional supra­molecular architecture.