Investigation of charge effects on poling and stability for corona-poled polymer films

The optimal corona-poling temperature of polymer films was accurately determined by measuring the temperature dependence of the in situ second-harmonic (SH) intensity profile under the applied poling electric field. The in situ SH intensity profile was first measured by probing both the surface voltages and the poling currents induced by surface/space charges for the corona-poled polymer films. Moreover, charge effects on the stability of the chromophore orientation were first studied by using the thermally stimulated discharge-current technique. PACS 72.20.Jv; 42.65.Ky; 73.61.Ph; 81.40.Tv     

Reversible 5′-end biotinylation and affinity purification of synthetic RNA

A reversible biotinylation phosphoramidite was synthesized and incorporated onto the 5′-end of an oligoribonucleotide on a solid phase synthesizer. After cleavage and deprotection, the crude synthetic oligomer mixture was incubated with NeutrAvidin^® coated microspheres, and the failure sequences removed by washing with a buffer followed by treating the microspheres with tetrabutylammonium fluoride to give a high quality unmodified full-length oligoribonucleotide.     

Effect of transverse object position on the reconstructed image of an aperture-limited in-line hologram

It is experimentally demonstrated that the image resolution from an in-line Fraunhofer hologram degrades appreciably when the centre of the diffraction pattern from a 5-bar resolution target is located asymmetrically in the hologram aperture. This effect is confirmed and analysed using calculated and experimentally measured images from holograms of a one-dimensional wire. Increasing asymmetry results in an increasing error in the measured linewidth, and a reduction of image resolution. A simple model based on average fringe contrast is used to predict this decrease in resolution with transverse object position.     

非晶态硒化镉薄膜瞬态光电特性

本文报道用真空热蒸发法淀积的非晶态硒化镉薄膜作光敏介质制备超快光电导探测器。用对撞脉冲锁模Nd:YAG激光器产生的超短光脉冲序列对探测器的响应时间进行检测,结果表明a-CdSe薄膜对皮秒(10^-12秒)级的超短光脉冲作用具有良好的瞬态响应光电特性,探讨a-CdSe薄膜快速弛豫过程的内在机理。     

Identification of peroxyacetic acid uroporphyrin I in the urine of patients with congenital erythropoietic porphyria by liquid chromatography and mass spectrometry

A new porphyrin, peroxyacetic acid uroporphyrin I, has been isolated from the urine of patients with congenital erythropoietic porphyria by reversed phase high performance liquid chromatography. The porphyrin was characterized by high resolution mass spectrometry and by typical chemical reactions of a peroxyacid.     

Fabricating blazing grating on NGD by photochemical etching

This paper tries to introduce the reader to the method of using photochemical re-action to copy holographic optical elements(HOEs)in relief.The holographic blazing gratingso copied is groove depth adjustable phase modulability enlarged through copying and 3.3times the diffraction efficiency(DE)of the original grating.It is expected that the newmethod will lead to the mass production of the light-weight HOEs at low cost.     

Controllable synthesis of ZnS/PMMA nanocomposite hybrids generated from functionalized ZnS quantum dots nanocrystals

We reported controllable synthesis of ZnS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of zinc chloride (ZnCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand were well dispersed in H₂O/dimethylformamide solution without any aggregation. In addition, the Mn-doped ZnS nanocrystals (NCs) were synthesized with similar method. Then, ZnS-PMMA hybrids were obtained via free radical polymerization in situ by using ZnS NCs functionalized with methacryloxypropyltrimethoxysilane (MPS). FT-IR characterization indicates the formation of robust bonding between ZnS NCs and the organic ligand. The TEM images show that ZnS NCs are well dispersed in PMMA matrix, and particle size of as-prepared ZnS NCs is about 2.6 nm, in agreement with the computing results of Brus’s model and Debye–Scherrer formula. The photoluminescence measurements present that ZnS NCs, Mn-doped ZnS NCs, and ZnS/PMMA hybrid show good optical properties.     

Polyaniline nanofibers fabricated by electrochemical polymerization: A mechanistic study

Polyaniline (PANI) nanofibers with interconnected network-like structures were electropolymerized on stainless steel substrates by galvanostatic electrolysis. The samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy (UV-vis) and Fourier transform infrared spectroscopy (FTIR). The results show that PANI and gels (mixtures of oligomer, dopant and aniline) form simultaneously during the electrochemical deposition. The gels play an important role in the formation of PANI nanofibers. The PANI formed in the early stage of polymerization is subject to secondary growth along one dimension, since the nucleation sites are suppressed by the wrapped gels. The dendritic degree of PANI nanofibers is related to dopants, and the order is as follows: PANI-H₃PO₄ > PANI-H₂SO₄ > PANI-HNO₃. No nanofibers are obtained using CH₃COOH as dopants due to the high solubility of PANI-CH₃COOH.     

An Interval-Parameter Fuzzy Approach for Multiobjective Linear Programming Under Uncertainty

An interval-parameter fuzzy linear programming method (IFMOLP) is proposed in this study for multiple objective decision-making under uncertainty. As a hybrid of interval-parameter and fuzzy methodologies, the IFMOLP incorporates interval-parameter linear programming and fuzzy multiobjective programming approaches to form an integrated optimization system. The method inherits advantages of interval-parameter programming, and allows uncertainties and decision-makers’ aspirations to be effectively communicated into its programming processes and resulting solutions. Membership functions for both objectives and constraints are formulated to reflect uncertainties in different system components and their interrelationships. An interactive solution procedure has been developed based on solution approaches of the interval-parameter and fuzzy programming techniques, plus necessary measures for handling the multiobjective feature. A didactic example is provided in the paper to illustrate the detailed solution process. Possibilities of further improvements by seeking Pareto optimum and incorporating flexible preference within constraints are also discussed.