A gas-kinetic scheme for shallow-water equations with source terms

In this paper, the Kinetic Flux Vector Splitting (KFVS) scheme is extended to solving the shallow water equations with source terms. To develop a well-balanced scheme between the source term and the flow convection, the source term effect is accounted in the flux evaluation across cell interfaces. This leads to a modified gas-kinetic scheme with particular application to the shallow water equations with bottom topography. Numerical experiments show better resolution of the unsteady solution than conventional finite difference method and KFVS method with little additional cost. Moreover, some positivity properties of the gas-kinetic scheme is established.     

Activation and Afterheat Calculation Analysis for TBM

Safety considerations of TBM are part of the design process to ensure that the TBM do not adversely affect the safety of ITER. So accurate calculations of all radioactivity and potential harmfulness are very important for designing of device, selecting of blanket and shield material, analyzing of the safety and environment, disposing of nuclear waste and operation of the reactor.     

Recurrence propagation equation of Hermite-Gaussian beams through a paraxial optical ABCD system with hard-edge aperture

Based on the generalized Huygens-Fresnel diffraction integral, a recurrence propagation equation of Hermite-Gaussian (H-G) beams through a paraxial optical ABCD system with hard-edge aperture is derived, which permits us to obtain the analytical propagation expression for H-G beams of any order. The advantages of our analytical results are analyzed, and the application is illustrated with numerical examples.     

三量子位Heisenberg XX 链中杂质对纠缠的影响

研究了有杂质时三量子位Heisenberg-XX链中正常格点之间的热纠缠情况，给出了Concurrence的解析表达式.进一步的讨论发现，杂质对正常格点的热纠缠有着重要的影响，甚至能够改变纠缠在反铁磁区的特性.理论表明，可以通过调节温度和杂质参数来控制纠缠. 关键词： Heisenberg -XX链 热纠缠 杂质格点     

基于新型长周期光纤光栅的掺铒光纤放大器

报道了基于高频CO₂激光脉冲写入的新型长周期光纤光栅的低噪音掺铒光纤放大器,这种新型长周期光纤光栅是用大约几千Hz的高频CO₂激光脉冲对光纤玻璃热冲击作用而形成的.在铒纤中插入一个长周期光纤光栅,会明显减少掺铒光纤放大器的放大自发辐射(ASE)噪音.报道了两种低噪音掺铒光纤放大器,作为前置放大器和线路放大器,它们的ASE噪音指数分别从4.0 dB减少到3.5 dB和从4.8 dB减少到4.3 dB,并且在作为线放时,其小信号增益从30 dB提高到37 dB,降噪及提高增益效应十分显著.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

High performance 1689-nm quantum well diode lasers

1689-nm diode lasers used in medical apparatus have been fabricated and characterized. The lasers had pnpn InP current confinement structure, and the active region consisted of 5 pairs of InGaAs quantum wells and InGaAsP barriers.     

Numerical study of simultaneous natural convection heat transfer from both surfaces of a uniformly heated thin plate with arbitrary inclination

 Numerical studies were conducted to investigate the natural convection heat transfer around a uniformly heated thin plate with arbitrary inclination in an infinite space. The numerical approach was based on the finite volume technique with a nonstaggered grid arrangement. For handling the pressure–velocity coupling the SIMPLE-algorithm was used. QUICK scheme and first order upwind scheme were employed for discretization of the momentum and energy convective terms respectively. Plate width and heating rate were used to vary the modified Rayleigh number over the range of 4.8×10⁶ to 1.87×10⁸. Local and average heat transfer characteristics were compared with regarding to the inclination angle. The empirical expressions for local and average Nusselt number were correlated. It has been found that for inclination angle less than 10^∘, the flow and heat transfer characteristics are complicated and the average Nusselt number can not be correlated by one equation while for inclination angle larger than 10^∘, the average Nusselt number can be correlated into an elegant correlation. Received on 18 April 2001 / Published online: 29 November 2001     

基于单光纤对模型的光纤束调制函数的建模与仿真

基于单光纤对光强调制特性的函数表达式,建立了双束型光纤束的调制函数,并引入一个虚拟轴间距参量,建立了随机型光纤束的光强调制函数.同时又在视内圈光纤束为单根粗光纤的情况下,建立了同轴I型和同轴型光纤束的光调制函数.在随机型和同轴型光纤束模型的基础上建立了双圈型(DC)和同轴随机型(C-R)光纤束的光调制系数.最后对上述光纤束的调制特性函数进行了计算机仿真实验.     

复方单硝酸异山梨酯-阿司匹林双缓释微丸胶囊的研制(Ⅱ)

以乙基纤维素、丙烯酸树脂Ⅱ和丙烯酸树脂Ⅲ为骨架材料分别制备单硝酸异山梨酯和阿司匹林混合骨架缓释微丸，并通过包薄膜衣进一步控制药物的释放。通过测定微丸的释放度对处方工艺进行评价，选择最佳微丸灌装胶囊．胶囊中两种药物均达到良好的缓释效果。符合中国药典对缓释制剂的要求．其体外释放过程同时符合Higuchi方程和一级释药方程，R^2值均在0．995以上。