The dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase from Haemophilus influenzae is a dinuclear metallohydrolase

The Zn K-edge extended X-ray absorption fine structure (EXAFS) spectra, of the dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase (DapE) from Haemophilus influenzae have been recorded in the presence of one or two equivalents of Zn(II) (i.e. [Zn_(DapE)] and [ZnZn(DapE)]). The Fourier transforms of the Zn EXAFS are dominated by a peak at ca. 2.0 A, which can be fit for both [Zn_(DapE)] and [ZnZn(DapE)], assuming ca. 5 (N,O) scatterers at 1.96 and 1.98 A, respectively. A second-shell feature at ca. 3.34 A appears in the [ZnZn(DapE)] EXAFS spectrum but is significantly diminished in [Zn_(DapE)]. These data show that DapE contains a dinuclear Zn(II) active site. Since no X-ray crystallographic data are available for any DapE enzyme, these data provide the first glimpse at the active site of DapE enzymes. In addition, the EXAFS data for DapE incubated with two competitive inhibitors, 2-carboxyethylphosphonic acid and 5-mercaptopentanoic acid, are also presented.     

The Synthesis And Chemical Properties Of N-D-Pentopyranosylamines,Derivatives Of Tryptamine And Tyramine.

Abstract

The synthesis and structure of N-D-pentopyranosylamines derived from the amines tiyptamine tyramine and the pentoses D-xylose, D-arabinose and D-lyxose are presented. NMR spectroscopy and mass spectrometry were used to verify the proposed α,β-D-pentopyranosylamine structures.     

Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4'-cyanobiphenyl (8CB) or 4- n -pentyl-4"-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Analytical Strategy for the Determination of Selenium in Biological Materials by Inductively Coupled Plasma-Mass Spectrometry with a Dynamic Reaction Cell

Selenium was determined in serum, hair, and tobacco by inductively coupled plasma-mass spectrometry using ⁷⁷Se, ⁷⁸Se, and ⁸²Se. The set of standards method (SSM) and the standard addition method (SAM) were applied to calibration with and without the use of internal standards (⁷²Ge and ¹⁰³Rh). In addition, the usefulness of the dynamic reaction cell (DRC) with methane as the reaction gas was characterized. The results obtained in different conditions were evaluated in terms of precision and accuracy. It was demonstrated theoretically and experimentally that an internal standard is a potential source of systematic errors as it can be influenced multiplicatively and additively by its own interferents (independently of selenium). Furthermore, it was shown that—against common opinion—an internal standard can fail in elimination of chemical interference effects influencing selenium and in increasing of precision of selenium determinations. The DRC was shown to be effective in the elimination of additive effects, although the results obtained by both SSM and SAM with DRC were systematically positively erroneous. Finally, selenium was determined accurately in each examined sample when SAM was applied to calibration, and signals were measured either for ⁸²Se without the use of the DRC, or for ⁷⁷Se or ⁷⁸Se with the use of the DRC. In addition, it has also been shown that samples should be diluted prior to analysis to the greatest acceptable extent.     

Solvent extraction of Cu,Mo, V,and U from leach solutions of copper ore and flotation tailings

A micro-cloud point extraction method was discussed for preconcentration and spectrophotometric quantification of U(VI). The method depends on complex formation between U(VI) and 2-(4-sulphophenyloazo)-1,8-dihydroxy-3,6-naphtalenedisulphonic acid (SPADNS) at pH 7.0 and subsequent extraction of the complex in a mixed surfactant medium (cethyltrimethyl ammonium bromide and Triton X-114). The separation was carried out in the presence of 1% Na₂SO₄ at room temperature. The calibration curve was linear up to 3000 µg L^?1. The enrichment factor, detection limit and precision were 16.0, 1.05 µg L^?1, and 2.3%, respectively. The method was employed for the determination of U(VI) in real samples with different matrices.     

Application of carbon nanotubes as solid-phase extraction sorbent for analysis of chlorophenols in water samples

The aim of this work was to investigate the efficiency of various MWCNTs as SPE materials for the preconcentration of chlorophenols. The COOH-functionalized MWCNTs and MWCNTs were used as SPE sorbents. To evaluate the capability of MWCNTs for the preconcentration of chlorophenols from water samples, 2,4-chlorophenol, 4-chlorophenol, 2,4,6-chlorophenol, 2,6-chlorophenol, 3,4-chlorophenol, and 2-chlorophenol were used as model compounds. Chlorophenols were extracted with acetone, methanol, ethanol, and dichloromethane, and determined by gas chromatography–mass spectrometry. COOH-functionalized MWCNTs <8 nm were found to be the best sorbent for the tested chlorophenols. For COOH-functionalized MWCNTs <8 nm, the recovery rates for all chlorophenols were higher than 50% when acetone or ethanol was used as eluents. In the case of dichloromethane elution, recovery rates for chlorophenols were from 62.0% for 2,6-DCP to 116.8% for 2,4-DCP; only for 2,4,6-TCP was the recovery rate 30.6%. Similar percentage recoveries were achieved with methanol as the eluent.     

Synthesis and Sm/Sm doping effects on photoluminescence properties of Sr4Al14O25

Complete and partial samarium reduction was achieved under strong reducing atmosphere by solid-state and combustion synthesis of Sr_3.96Sm_0.04Al₁₄O₂₅. Dependence of different fluxing agents on the formation of various strontium aluminates was examined. The samples were investigated by X-ray powder diffraction, temperature dependent luminescence decay and photoluminescence measurements. Excitation with UV radiation resulted in sharp and well resolved emission lines of samarium ions. Distinct temperature behavior for Sm²⁺ and Sm³⁺ were detected in the range of 100-500 K. Estimated emission thermal quenching values (TQ_1/2) for divalent samarium were approximately 270 K while for trivalent state around 660 K. Measured luminescence decay values of Sm²⁺ are substantially lower than for Sm³⁺,≈1.7 and ≈2.7 ms, respectively. The spectral feature of Sm²⁺ emission spectrum indicates that dopant occupies low symmetry site in Sr₄Al₁₄O₂₅ compound.