Thermoresponsive N,N-dialkylacrylamide copolymer blends as DNA sieving matrices with a thermally tunable mesh size

In an earlier study we showed that a blend of thermoresponsive and nonthermoresponsive hydroxyalkylcelluloses could be used to create a thermally tunable polymer network for double-stranded (ds) DNA separation. Here, we show the generality of this approach using a family of polymers suited to a wider range of DNA separations: a blended mixture of N,N-dialkylacrylamide copolymers with different thermoresponsive behaviors. A mixture of 47% w/w N,N-diethylacrylamide (DEA)/53% w/w N,N-dimethylacrylamide (DMA) (DEA47; thermoresponsive, transition temperature = 55 degrees C in water) and 30% w/w DEA/70% w/w DMA (DEA30; nonthermoresponsive, transition temperature > 85 degrees C in water) copolymers in the ratio of 1:5 w/w DEA47:DEA30 was used to separate a dsDNA restriction digest (PhiX174-HaeIII). We investigated the effects of changing mesh size on dsDNA separation, as controlled by temperature. We observed good DNA separation performance with the copolymer blend at temperatures ranging from 25 degrees C to 48 degrees C. The separation selectivity was evaluated quantitatively for certain DNA fragment pairs as a function of temperature. The results were compared with those obtained with a control matrix consisting only of the nonthermoresponsive DEA30. Different DNA fragment pairs of various sizes show distinct temperature-dependent selectivities. Over the same temperature range, no significant temperature dependence of selectivity is observed for these DNA fragment pairs in the nonthermoresponsive control matrix. Overall, the results show similar trends in the temperature dependency of separation selectivity to what was previously observed in hydroxyalkylcellulose blends, for the same DNA fragment pairs. Finally, we showed that a ramped temperature scheme enables improved separation in the blended copolymer matrix for both small and large DNA fragments, simultaneously in a single capillary electrophoresis (CE) run.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.     

Indirect atomic-absorption spectrophotometric determination of phosphorus after flotation as the ion-pair of molybdophosphate with bis[2-(5-chloro-2-pyridylazo)-5-diethylaminophenolato]cobalt(III)

An atomic-absorption spectrophotometric method has been developed for the indirect determination of phosphorus. The calibration graph is linear over the range 0.025-0.2 mug of phosphorus. The relative standard deviation is 1.3% for 0.2 mug of phosphorus (6 replicates). The method has been applied to the determination of phosphate in natural water samples. The enhancement effect of acetone on the determination is discussed.     

纳秒强激光场中苯电离产生高价离子的研究

用25 ns脉冲Nd-YAG 532 nm的激光，在1010～1011 W•cm－2的光场强度下，利用飞行时间质谱对He、 N2、Ar载气条件下苯的激光电离过程进行了研究.发现当利用氩作为载气时，除观察到C2＋、C2H2+、C3H3+、C6H6+离子外，还观察到很强的Cq＋(q=1～3)高价离子.这些离子都有很高的平动能， C2＋的最可几平动能为12.9 eV， C3＋为37.5 eV.通过改变载气种类和压力及在不同光场强度条件下的实验，可以认为这些高价离子来源于含苯团簇的库仑爆炸过程.     

铁硅酸盐分子筛乙苯氧化脱氢催化性能研究Ⅱ．FeZSM－5的酸碱性质和积炭对反应活性的影响

本文应用碱性气体吸附的红外光谱和ＴＰＤ技术研究了ＦｅＺＳＭ－５（Ｆ＿４）的酸性，酸性顺序为：Ｈ－Ｆ＿４＞Ｆｅ＿２Ｏ＿３／Ｆ＿４＞Ｆ＿４原粉＞水热处理的Ｋ－Ｆ＿４＞Ｌｉ－Ｆ＿４＞ＮａＦ＿４＞Ｋ－Ｆ＿４＞ＮａＯＨ／Ｆ＿４，比较了酸强度和积炭对乙苯氧化脱氢性能的影响，以及催化剂酸碱性质与积炭的关系．结果表明，乙苯氧化脱氢反应是在酸碱协同作用下进行的，积炭也参与了氧化脱氢反应，催化剂表面上Ｌ酸中心产生的具有一定Ｃ、Ｈ、Ｏ比的积炭具有高的氧化脱氢活性．碱金属阳离子改性的具有Ｌ酸中心的ＦｅＺＳＭ－５是乙苯氧化脱氢的高活性催化剂。     

Application of Phosphorus-31 Nuclear Magnetic Resonance Spectrosocopy for the Study of Human Diabetic Cataractogenesis

Intact human Senses incubated at 5.5 mM (normal) and 35.5 mM glucose were examined by phosphorus-31 nuclear magnetic resonance (31P NMR) spectroscopy. Lense in 35.5 mM glucose showed an altered metabolic steady-state characterized by a lowered adenosine triphosphate/inorganic orthophosphate ratio. ³¹P NMR spectroscopy can be used to measure metabolic changes in the lens. This model offers an important means to study dynamic metabolism in the human lens in the setting of diabetic cataractogenesis.     

Identification of low molecular weight proteins isolated by 2-D liquid separations

Proteins with molecular mass (M(r)) <20 kDa are often poorly separated in 2-D sodium dodecyl sulfate polyacrylamide gel electrophoresis. In addition, low-M(r) proteins may not be readily identified using peptide mass fingerprinting (PMF) owing to the small number of peptides generated in tryptic digestion. In this work, we used a 2-D liquid separation method based on chromatofocusing and non-porous silica reversed-phase high-performance liquid chromatography to purify proteins for matrix-assisted laser desorption/ionization time-of-flight mass spectrometric (MALDI-TOFMS) analysis and protein identification. Several proteins were identified using the PMF method where the result was supported using an accurate M(r) value obtained from electrospray ionization TOFMS. However, many proteins were not identified owing to an insufficient number of peptides observed in the MALDI-TOF experiments. The small number of peptides detected in MALDI-TOFMS can result from internal fragmentation, the few arginines in its sequence and incomplete tryptic digestion. MALDI-QTOFMS/MS can be used to identify many of these proteins. The accurate experimental M(r) and pI confirm identification and aid in identifying post-translational modifications such as truncations and acetylations. In some cases, high-quality MS/MS data obtained from the MALDI-QTOF spectrometer overcome preferential cleavages and result in protein identification.     

Theoretical studies on vibrational spectra of some halides of Group IIB elements

The vibrational spectra of Group IIB elements halides MX2 and their dimers M2X4 (M=Zn(II), Cd(II) and Hg(II); X=F, Cl, Br and I) have been systematically investigated by ab initio RHF and B3LYP methods with LanL2MB, LanL2DZ and SDD basis sets. The optimized geometries, calculated vibrational frequencies are evaluated via comparison with the experimental data. The vibrational frequencies, calculated by these methods with different basis sets, are compared to each other too. The best results can be obtained by RHF/SDD method, with this method, the deviations for MX2 and Hg2X4 are <7%. Some vibrational frequencies of M2X4 that have not been experimentally reported are also predicted.     

Electronic structure and molecular orbital study of the first excited state of the high‐efficiency blue OLED material bis(2‐methyl‐8‐quinolinolato)aluminum(III) hydroxide complex from ab initio and TD‐B3LYP

Bis(2‐methyl‐8‐quinolinolato)aluminum(III) hydroxide complex (AlMq₂OH) is used in organic light‐emitting diodes (OLEDs) as an electron transport material and emitting layer. By means of ab initio Hartree–Fock (HF) and density functional theory (DFT) B3LYP methods, the structure of AlMq₂OH was optimized. The frontier molecular orbital characteristics and energy levels of AlMq₂OH have been analyzed systematically to study the electronic transition mechanism in AlMq₂OH. For comparison and calibration, bis(8‐quinolinolato)aluminum(III) hydroxide complex (Alq₂OH) has also been examined with these methods using the same basis sets. The lowest singlet excited state (S₁) of AlMq₂OH has been studied by the singles configuration interaction (CIS) method and time‐dependent DFT (TD‐DFT) using a hybrid functional, B3‐LYP, and the 6‐31G* basis set. The lowest singlet electronic transition (S₀ → S₁) of AlMq₂OH is π → π* electronic transitions and primarily localized on the different quinolate ligands. The emission of AlMq₂OH is due to the electron transitions from a phenoxide donor to a pyridyl acceptor from another quinolate ligand including C → C and O → N transference. Two possible electron transfer pathways are presented, one by carbon, oxygen, and nitrogen atoms and the other via metal cation Al³⁺. The comparison between the CIS‐optimized excited‐state structure with the HF ground‐state structure indicates that the geometric shift is mainly confined to the one quinolate and these changes can be easily understood in terms of the nodal patterns of the highest occupied and lowest unoccupied molecular orbitals. On the basis of the CIS‐optimized structure of the excited state, TD‐B3‐LYP calculations predict an emission wavelength of 499.78 nm. An absorption wavelength at 380.79 nm on the optimized structure of B3LYP/6‐31G* was predicted. They are comparable to AlMq2OH 485 and 390 nm observed experimentally for photoluminescence and UV‐vis absorption spectra of AlMq₂OH solid thin film on quartz, respectively. Lending theoretical corroboration to recent experimental observations and supposition, the reasons for the blue‐shift of AlMq2OH were revealed. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Design and Synthesis of 3‐Aryl‐5‐Alicylic‐[1,2,4]‐oxadiazoles as Novel Platelet Aggregation Inhibitors

A series of 4‐[2‐(alicyclic‐[1,2,4]oxadiazol‐3‐yl)phenoxy]‐butyric acids were synthesized from N‐hydroxy‐2‐isopropoxy benzamidine in 4 steps with good yields. These [1,2,4]oxadiazoles are novel platelet aggregation inhibitors preventing human platelet aggregation induced by thromboxane derivative U44,619 and adenosine diphosphate. A structure‐activity‐relationship study revealed that the potency for these 5‐oxadiazoles increases with the increase in the ring size of the alicylic rings. Derivative 8f may be useful as a template for the design of more potent anti‐platelet agents.