利用高炉水淬渣制备(Ca/Y)-α-Sialon陶瓷的组织与性能

以高炉水淬渣合成的Ca-α-Sialon粉体为原料采用无压烧结技术制备了（Ca/Y）-α-Sialon陶瓷。通过用排水法、三点弯曲实验法、金相显微镜法、XRD法等手段研究了（Ca/Y）-α-Sialon陶瓷的烧结致密化过程、材料的力学性能、显微组织、相组成和材料的断裂特征。结果表明,适量的Y2O3促进材料的烧结致密化和提高材料的力学性能,但Y2O3过量（大于10%）时对材料的烧结和力学性能不利。掺杂Y^3＋的（Ca/Y）-α-Sialon呈柱状晶,随着Y2O3含量的增加和烧结温度的提高,（Ca/Y）-α-Sialon呈柱状晶出现粗化和等轴化。含10%Y2O3的材料在1700℃烧结时可获得较高的力学性能。     

A direct quantitative analysis method for monitoring biogenic volatile organic compounds released from leaves of Pelargonium hortorum in situ

A direct quantitative method is presented that is based upon the use of multiple headspace solid phase microextraction (HS-SPME) to monitor biogenic volatile organic compounds (BVOCs) released from a living leaf of Pelargonium hortorum in situ. Seventeen BVOCs were detected by GC-MS after a single SPME extraction using a CAR/DVB/PDMS fibre. An internal standard was employed to determine the absolute amounts of seven terpenoid compounds released from a P. hortorum leaf. The quantitative analysis was performed over two days, with extraction preformed for 20 min every 3 h. The amount of volatiles extracted varied with the time of day, with two maxima recorded at 14:00 (day 1) and 17:00 (day 2), corresponding to 236 and 277 ng of the seven terpenoids recorded, respectively. These results indicate that multiple HS-SPME in combination with an internal standard is a simple, quick, and quantitative technique for analysising BVOC emissions from a live plant sample.     

Chirality control in optically active polysilane aggregates

A novel strategy for controlling the higher order chirality of aggregates prepared from enantiopure polysilanes is experimentally probed and discussed. Structurally similar poly[n-alkyl(aryl)]silanes were synthesized in which one side chain comprised the chiral (S)-2-methylbutyl group and the other an achiral m- or p-alkyl-substituted phenyl ring. In solution the polymers adopt helical conformations with the same induced preferential screw sense chirality, as evidenced by circular dichroism (CD) spectroscopy. Aggregates, however, formed by addition of a nonsolvent to a polymer solution, show oppositely signed CD spectra. Consistent results were obtained for another series of poly[p-n-alkyl(aryl)]silanes where alkyl is butyl, propyl, and ethyl. The sense of the aggregate higher order chirality is dependent on the chemical composition and environment and is coarse-tunable by adjusting the length of the achiral side chain and fine-tunable by adjusting the good/poor solvent ratio. The origin of these effects is discussed with reference to a simple model.     

A comparison between the SBR vulcanizates reinforced by magnesium methacrylate added directly or prepared in situ

The styrene-butadiene rubber (SBR) cured by dicumyl peroxide was reinforced by magnesium methacrylate [Mg(MAA)₂], which was added into SBR directly or prepared in situ in SBR through the neutralization of magnesium oxide (MgO) and methacrylic acid (MAA). The experimental results show that the SBR vulcanizates reinforced by Mg(MAA)₂ prepared in situ have better mechanical properties than those reinforced by Mg(MAA)₂ added directly. The SBR vulcanizates with Mg(MAA)₂ prepared in situ are semi-transparent, but those with Mg(MAA)₂ added directly are opaque. The Fourier transform infrared analysis shows that the polymerization conversion of Mg(MAA)₂ in the SBR vulcanizates with Mg(MAA)₂ prepared in situ is much higher than that in the SBR vulcanizates with Mg(MAA)₂ added directly. The scan probe microscopy photographs show that the particles in the SBR vulcanizates with Mg(MAA)₂ prepared in situ are much finer and disperse more evenly than that in the SBR vulcanizates with Mg(MAA)₂ added directly.     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

Total synthesis of crotophorbolone

As a natural diterpenoid, crotophorbolone possesses a challenging trans,trans-5/7/6 framework decorated with six contiguous stereogenic centers and is structurally and biogenetically related to tigliane-type diterpenoids with intriguing bioactivities such as phorbol and prostratin. Based on the convergent strategy, we completed an eighteen-step total synthesis of crotophorbolone starting from (−)-carvone and (+)-dimethyl-2,3-O-isopropylidene-l-tartrate. The key elements of the synthesis involve expedient installation of the six-membered ring and the five-membered ring with multiple functional groups at an early stage, cyclization of the seven-membered ring through alkenylation of the ketone between the five-membered ring and the six-membered ring, functional group-sensitive ring-closing metathesis and final selective introduction of hydroxyls at C₂₀ and C₄.

Convergent total synthesis of crotophorbolone was accomplished in 18 longest linear steps. Observation of unexpected thermodynamic stability of a cis,trans-5/7/6 tricycle would benefit synthetic design of tigliane- and daphnane-related diterpenoids.     

Chemical Constituents from Cynoglossum gansuense

Two new alkaloids, i.e., (2,3‐dihydro‐1‐oxo‐1H‐pyrrolo[1,2‐a]pyrrol‐7‐yl)methyl (2S*,3S*)‐3‐[(β‐D ‐glucopyranosyl)oxy]‐2‐hydroxy‐2‐(1‐methylethyl)butanoate ( 1 ) and 1,2‐dihydro‐8‐methoxy‐2‐oxoquinoline‐4‐carboxylic acid ( 2 ), were isolated from the alcoholic extract of the whole plant of Cynoglossum gansuense, together with twelve known compounds Their structures were characterized by means of spectroscopic methods, especially by ¹H‐, ¹³C‐, and 2D‐NMR, as well as by HR‐MS experiments and comparison with literature data.     

Synthesis and crystallization kinetics of the novel ion exchanger Na<Subscript>4</Subscript>Ti<Subscript>4</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript> for cesium removal

Thermodynamics and crystallization kinetics of the hydrothermal synthesis of Na₄Ti₄Si₃O₁₀ (NaTS) were systemically studied by both experiments and model simulation. Experimental results showed that the curve of crystallinity with time was a characteristic signmoid in the shape that indicated the crystallization of Na₄Ti₄Si₃O₁₀ was a typical spontaneous nucleation process on the laboratory scale. Crystallization of NaTS belongs to the liquid-liquid transformation mechanism and the reaction is endothermic (ΔH = 15.3 kJ/mol). A mathematic model of crystallization kinetics was developed to simulate the synthesis of NaTS. Runge-Kutta and simplex methods were adopted to solve the partial differential equations. Model results fitted well with the experimental data and showed that the synthesis process belongs to spontaneous nucleation and crystal growth. Moreover, the very small crystal growth constant (5.6·10⁻⁷) and gel dissolution constant (7.0·10⁻⁷) indicate they are the rate-limiting steps of the whole synthesis process.     

Effects of double substitution on the thermodynamic stabilities of nitrogen radicals

Ｓｔｕｄｉｅｓｏｎｋｉｎｅｔｉｃｓｏｆｒａｄｉｃａｌｒｅａｃｔｉｏｎｓ[1]ａｎｄｏｎＣＨｂｏｎｄｄｉｓｓｏｃｉａｔｉｏｎｅｎｅｒｇｉｅｓ(ＢＤＥ)[2]ｈａｖｅｓｈｏｗｎｔｈａｔｃａｒｂｏｎｒａｄｉｃａｌｓａｒｅｓｔａｂｉｌｉｚｅｄｂｙｅｉｔｈｅｒａｎｅｌｅｃｔｒｏｎｄｏｎａｔｉｎｇｇｒｏｕｐ(ＥＤＧ)ｏｒａｎｅｌｅｃｔｒｏｎｗｉｔｈｄｒａｗｉｎｇｇｒｏｕｐ(ＥＷＧ),ａｎｄｔｈａｔｉｆａｃａｒｂｏｎｒａｄｉｃａｌｉｓｓｕｂｓｔｉｔｕｔｅｄｗｉｔｈｂｏｔｈａｎＥＤＧａｎｄａｎＥＷＧａｔｔｈｅｓａｍｅｃｅｎ…     

Nucleation mechanisms and speciation of metal oxide clusters

The self-assembly mechanisms of polyoxometalates (POMs) are still a matter of discussion owing to the difficult task of identifying all the chemical species and reactions involved. We present a new computational methodology that identifies the reaction mechanism for the formation of metal-oxide clusters and provides a speciation model from first-principles and in an automated manner. As a first example, we apply our method to the formation of octamolybdate. In our model, we include variables such as pH, temperature and ionic force because they have a determining effect on driving the reaction to a specific product. Making use of graphs, we set up and solved 2.8 × 10⁵ multi-species chemical equilibrium (MSCE) non-linear equations and found which set of reactions fitted best with the experimental data available. The agreement between computed and experimental speciation diagrams is excellent. Furthermore, we discovered a strong linear dependence between DFT and empirical formation constants, which opens the door for a systematic rescaling.

The self-assembly mechanisms of polyoxometalates (POMs) are still a matter of discussion owing to the difficult task of identifying all the chemical species and reactions involved. The POMSimulator deals with that complexity in an automated manner.