Über die Mischbarkeit von UN mit LaN,CeN, PrN,NdN, SmN,GdN, DyN,und ErN

X-Ray studies of the mixed nitride phases indicate complete miscibility in all cases. Lattice parameters generally showed negative deviations from the additivity rule.

Teilauszug aus der Dissertation des Dipl.-Ing.J. Waldhart an der Technischen Universität Wien, Österreich.     

Fake molecular-orbital calculations

The FAKE method of approximate molecular-orbital calculations is presented and illustrated by application to a number of molecules. The method is of the extended Huckel type but uses accurately computed kinetic-energy matrix elements and avoids scale factors of the Wolfsberg—Helmholtz type. It also includes neighbor-atom charge effects and single-center off-diagonal matrix elements. These features permit FAKE occupied-orbital energies and charge distributions to come into close agreement with corresponding ab initio quantities.     

Zur Synthese sulfonierter Derivate von 4-Amino-1,3-dimethylbenzol und 2-Amino-1,3-dimethylbenzol

Syntheses of Sulfonated Derivatives of 4-Amino-1, 3-dimethylbenzene and 2-Amino-1, 3-dimethylbenzene Direct sulfonation of 4-amino-1, 3-dimethylbenzene (1) and sulfonation of 4-nitro-1,3-dimethylbenzene ( 4 ) to 4-nitro-1,3-dimethylbenzene-6-sulfonic acid ( 3 ) followed by reduction yield 4-amino-1,3-dimethylbenzene-6-sulfonic acid ( 2 ). The isomeric 5-sulfonic acid ( 5 ) however is prepared solely by baking the acid sulfate salt of 1 . Reaction of sulfur dioxide with the diazonium chloride derived from 2-amino-4-nitro-1,3-dimethylbenzene ( 7 ) leads to 4-nitro-1,3-dimethylbenzene-2-sulfonyl chloride ( 8 ), which is successively hydrolyzed to 4-nitro-1,3-dimethylbenzene-2-sulfonic acid ( 9 ) and reduced to 4-amino-1, 3-dimethylbenzene-2-sulfonic acid ( 6 ). Treatment of 4-amino-6-bromo-1,3-dimethylbenzene ( 12 ) and 4-amino-6-chloro-1, 3-dimethylbenzene ( 13 ), the former obtained by reduction of 4-chloro-6-nitro-1,3-dimethyl-benzene ( 10 ) and the latter from 4-chloro-6-nitro-1, 3-dimethylbenzene ( 11 ), with oleum yield 4-amino-6-bromo-1,3-dimethylbenzene-2-sulfonic acid ( 14 ) and 4-amino-6-chloro-1,3-dimethylbenzene-2-sulfonic acid ( 15 ) respectively; subsequent carbon-halogen hydrogenolyses of 14 and 15 lead also to 6 (Scheme 1). Baking the acid sulfate salt of 2-amino-1, 3-dimethylbenzene ( 17 ) gives 2-amino-1, 3-dimethylbenzene-5-sulfonic acid ( 16 ), whereas the isomeric 4-sulfonic acid ( 18 ) can be prepared by either of the following three possible pathways: Sulfonation of 2-nitro-1,3-dimethylbenzene ( 20 ) to 2-nitro-1,3-dimethylbenzene-4-sulfonic acid ( 21 ) followed by reduction or sulfonation of 2-acetylamino-1,3-dimethylbenzene ( 19 ) to 2-acetylamino-1,3-dimethylbenzene-4-sulfonic acid ( 22 ) with subsequent hydrolysis or direct sulfonation of 17 . Further sulfonation of 18 yields 2-amino 1,3-dimethylbenzene-4,6-disulfonic acid ( 23 ), the structure of which is independently confirmed by reduction of unequivocally prepared 2-nitro- 1,:3-dimethylbenzene-4,6-disulfonic acid ( 24 )(Scheme 2).     

Über 4-Alkylamino-bzw. 4-Arylamino-5,6-dihydro-2(1H)-pyridinthione

Heating 1-alkyl- or 1-aryldihydro-6-methyl-2(1H)-pyrimidinethiones5, 6 in an inert medium causes rearrangement to 4-alkylamino-(4-arylamino-)-5,6-dihydro-2(1H)-pyridinethiones11, 12, probably via the methylene form29, by thermal heterolysis of the N₁/C₂ bond and exchange of the alkylamino (arylamino) group 1 through the carbon atom of the methylene group 6. The aminodihydropyridinethiones11, which can be regarded as cyclic derivatives of 3-aminothiocrotonamide, react with bistrichlorophenylmalonate under diacylation, and with formaldehyde and primary amines to yield aminodialkylation products of the enamine system, tetrahydro-4-hydroxy-7,7-dimethyl-5-thioxopyrido[4,3-b]pyridine-2(1H)-ones13, 14 and hexahydro-7,7-dimethylpyrido[4,3-d]pyrimidine-5(6H)-thiones18, 19, 21 respectively. H₂O₂ converts11 to the corresponding 4-aminodihydro-2(1H)-pyridones22, which can be reconverted into11 with P₄S₁₀.11 reacts with alkyl halides to 2-alkylthiodihydropyridines23, 24, 25. The mechanism of the methylpyrimidine-pyridine rearrangement is discussed.     

Synthesis of pyridyl- and quinolyl-substituted 2-aminothiazoles

Five 2-amino-4-(x-pyridyl)- and 2-amino-4-(x-quinolyl)thiazoles have been synthesized by the condensation of thiourea with bromoacetylpyridines and -quinolines. The reaction of pyridyl pyridylmethyl ketones with thiourea and halogens produced four 2-aminothiazoles possessing pyridyl substituents in 4- and 5-positions on the thiazole ring. Treatment of N-(3-pyridyl)- and N-(3-quinoiyl)thiourea with α-bromoketones gave seven new 2-(3-pyridyl)amino- and 2-(3-quinolyl)aminothiazoles. The ultraviolet spectra of the pyridyl- and quinolyl- substituted 2-aminothiazoles were recorded.     

FLUORESCENCE QUANTUM YIELDS OF 124-kDa PHYTOCHROME FROM OAT UPON EXCITATION WITHIN DIFFERENT ABSORPTION BANDS

Abstract— A fluorescence quantum yield (emission at650–850 nm) of π= (2.3 ± 0.3)10⁻³ was measured for the red-absorbing form (Pr) of 124-kDa phytochrome from etiolated oat seedlings ( Avena sativa ) upon excitation in the Soret band at Λ^exc= 380 nm. The small difference between this value and the previously determined quantum yield with Λ^exc= 640 nm, π= (3.5 ± 0.4)10⁻³is attributed to a blue-absorbing emitter responsible for the "anomalous" or "blue" emission of the chromoprotein in the region from ca. 400 to 550 nm. The absorption of Pr at 380 nm is consequently somewhat lower than that measured directly from the spectrum. Processes from upper excited states of the Pr phytochromobilin-derived chromophore other than rapid relaxation to the emitting state are not important. A quantum yield of Φ ' 1.2 times 10⁻³ is estimated for the blue fluorescence. The proportion of the blue emitters relative to Pr appears to be relatively high.     

The temperature dependence of rotational tunneling

In the last few years tunneling transitions have been observed for the highly symmetric groups CH₄, CD₄, NH ₄ ⁺ , and CH₃ rotating in various environments. Typically the tunneling lines shift to lower energies with increasing temperatures. In this paper the shift of the tunneling energy is calculated in a microscopic approach to the problem. The coupling of the rotating groups to the lattice modes is studied in two stages. First the rotating group is coupled to a single oscillator, then to the modes of a Debye crystal. The first calculation leads to a set of discrete tunneling lines with an energy that diminishes as the oscillator is excited into higher levels. The second approach yields a single tunneling line shifted down-wards with increasing phonon population. The shift is proportional toT ⁴. The calculation explains the energy shift of the tunneling lines with reasonable values for the coupling parameters. In some cases also a broadening has been observed which does not follow from our calculations.     

A novel way to study the initial stages of soap-free emulsion polymerizations: The intercalation of polystyrene oligomers into hydrotalcite

The dominant species in the early stages of an emulsifier-free emulsion polymerization of styrene has been found to be an oligomer of two to three monomer units using a novel trapping technique. This involved the intercalation of charged primary oligomers between the layers of a hydrotalcite, [Mg₄Al₂(OH)₁₂]²⁺[A]^2- (where A = dianion). Hydrotalcites are an important class of lamellar, inorganic compounds whose interlayer spacing can be mod-ified by anion exchange. Our approach first involved preparing a hydrotalcite precursor in which the layers were propped apart by an organic dianion (terephthalate = TA). This material was then used to capture the negatively charged polystyrene oligomers from the emulsion polymerization reaction mixture. We found that TA was rapidly ion-exchanged for the charged oligomers. The resulting pillared hydrotalcite material was characterized using XRD and SEC. We found that the interlayer spacing between the hydroxide layers increased to 23.2 Å on exposure to the emulsion reaction mixture. This represents an interlayer expansion of 18.3 Å (after subtraction of the hydroxide layer contribution), which is cnsistent with intercalation of oligomers with two to three monomer units arranged in a bilayer. This size estimate was confirmed by the results of size exclusion chromatography. © 1995 John Wiley & Sons, Inc.