Development of a heterogeneous chemiluminescent flow immunoassay for DDT and related compounds

A heterogeneous chemiluminescent (CL) flow immunoassay for DDT was optimized comparing different types of immunoaffinity supports: beads, nylon coils and membranes (membranes HyBondN+). In order to characterize solid immunoaffinity supports two basic immunoassay formats were performed, using (1) enzyme-labeled secondary and (2) enzyme-labeled specific monoclonal antibodies (MAbs). In both formats, hapten DDT5 conjugated to ovalbumin immobilized on solid supports according to the appropriate immobilization procedure, enzyme label (horseradish peroxidase, HRP) and luminescent detection (luminol/H₂O₂/p-iodophenol) were used. The lowest limit of detection (LOD), 1 nM p,p-DDT, was obtained with a membrane-based flow immunoassay with HRP-labeled specific antibody. Beads and packed tubing were discarded as appropriate supports because of the difficulties encountered for reproducible packing and the occurrence of light scatterring (beads), which seriously compromised the performance and reproducibility of the flow immunoassay.     

Kontinuierliche Messung von 14C-markierten Aminos?uregemischen mit Hilfe eines Scintillatorschlauches nach der Trennung an Ionenaustauschers?ulen

Zusammenfassung Es wird eine Methode beschrieben, die es gestattet, während einer automatischen Aminosäuretrennung an Ionenaustauschersäulen die Radioaktivität der einzelnen ¹⁴C-markierten Aminosäuren zu messen. Die aufgetrennten Fraktionen werden unmittelbar am Säulenausgang durch eine Meßanordnung geschickt, bestehend aus einem Scintillatorschlauch, der sich zwischen zwei in Koinzidenz geschalteten Photomultipliern befindet. Anschließend wird mit Ninhydrin angefärbt. Die Nachweisgrenze beträgt 2 · 10^–3 C. Die Methode ist einfach zu handhaben, die Meßgeräte, einschließlich der Meßzelle, sind im Handel erhältlich.

---

Summary A method is described for the continuous measurement of ¹⁴C-labelled amino-acids during automatic separation by ion-exchanger columns. Immediately after emerging from the column the single fractions are passed through a measuring device consisting of a plastic scintillator between two photomultipliers in a coincidence circuit. Subsequently the eluate is reacted with ninhydrin. The limit of detection is 2 · 10^–3 C. The procedure is simple and the measuring device is commercially available.

---

---

Die Untersuchungen wurden durch den Minister für Atomkernenergie gefördert. Hierfür danken wir auch an dieser Stelle verbindlich.

---

Am Ausbau der Methode waren zeitweilig die Herren Dr. Ing. W. Heptner und Dr. Ing. S. Vierkötter beteiligt.     

Novel RPLC stationary phases for lipophilicity measurement: solvatochromic analysis of retention mechanisms for neutral and basic compounds

An RPLC was developed to rapidly determine lipophilicity of neutral and basic compounds using three base deactivated RPLC stationary phases particularly designed for the analysis of basic compounds, namely, Supelcosil ABZ(+)Plus, Discovery RP Amide C16, and Zorbax Extend C18. The work consisted of three sets of experiments. In the first log kw values of neutral compounds were extrapolated using hydroorganic mobile phases at different compositions. Good correlation between log kw and log Poct indicated that the method was appropriate for these supports, without adding a silanol masking agent. In the second set of experiments, isocratic log k values of neutral and basic compounds were measured with three different mobile phases. The best estimation of lipophilicity was obtained for neutral and basic compounds when the secondary interactions were strongly reduced (i. e., when basic compounds were under their neutral form). In the third set of experiments, isocratic retention factors of basic compounds (in their neutral form) were measured with a high-pH mobile phase, on a chemically stable support (Zorbax Extend C18). Under these chromatographic conditions, correlation between the isocratic retention factors and log Poct (log D10.5) for basic compounds was similar to that for neutral compounds.     

Chemische Ionisations-Massenspektrometrie von Organophosphors?ureinsecticiden mit verschiedenen Reaktantgasen

Zusammenfassung Chemische Ionisations-Massen-spektren (CI-MS) wurden mit einer Kopplung Dünnfilmcapillar-Gas-Chromatographie-Massenspektrometrie von 23 Organophosphorsäurepesticiden mit Isobutan als Reaktantgas gemessen. Alle Substanzen zeigten im CI-MS ein intensives Ion bei M + 1. Die CI-MS der einzelnen Substanzen werden diskutiert und mit Elektronenstoß-MS und CI-MS, die mit Methan oder Methanol als Reaktantgas erhalten wurden, verglichen. Die MS werden beim Übergang von Elektronenstoßionisation zu CI mit den Reaktantgasen Methan, Isobutan und Methanol in dieser Reihenfolge einfacher. Mit Methanol wird nur noch das M + 1-Ion gefunden. Für die praktische Rückstandsanalyse wird Isobutan als Reaktantgas vorgeschlagen.

---

Chemical ionization mass spectrometry of organophosphorus pesticides with various reagent gases

Summary Chemical ionization mass spectra (CI-MS) of 23 organophosphorus pesticides with isobutane as reagent gas were obtained by a combination of open tubular column gas chromatography-mass spectrometry. All substances show intense M + 1 ions in the CI-MS. The CI-MS of the individual substances obtained with isobutane were discussed and compared with their electron impact mass spectra (EI-MS) and CI-MS obtained with methane or methanol as reagent gases. The spectra became simpler applying CI-MS instead of EI-MS. In CI-MS the extent of fragmentation decreased changing the reagent gas from methane to isobutane and methanol. With methanol, usually only the M + 1 ion was observed in the spectra. For routine residue analysis, isobutane as reagent gas is recommended.

     

The Sialons MLn[Si4−xAlxOxN7−x] with M = Eu,Sr, Ba and Ln = Ho‐Yb – Twelve Substitution Variants with the MYb[Si4N7] Structure Type

The oxonitridoalumosilicates (so‐called sialons) MLn[Si_4?xAl_xO_xN_7?x] with M = Eu, Sr, Ba and Ln =Ho, Er, Tm, Yb were obtained by the reaction of the respective lanthanoid metal, the alkaline earth carbonates or europium carbonate, resp., AlN, “Si(NH)₂” and MCl₂ as a flux in a radiofrequency furnace at temperatures around 2100 °C. The compounds MLn[Si_4?xAl_xO_xN_7?x] are relevant for the investigation of substitutional effects on the materials properties due to their ability of tolerating a comparatively large phase width up to x ≈ 2.0(5). The crystal structures of the twelve compounds were refined from X‐ray single crystal data and X‐ray powder data and are found to be isotypic to the MYb[Si₄N₇] structure type. The compounds crystallize in space group P6₃mc (no. 186, hexagonal) and are made up of chains of so‐called starlike units [N^[4](SiN₃)₄] or [N^[4]((Si,Al)(O,N)₃)₄], respectively. These units are formed by four (Si,Al)(N/O)₄ tetrahedra sharing a common central nitrogen atom. The structure refinement was performed utilizing an O/N‐distribution model according to Paulings rules, i.e. nitrogen was positioned on the four‐fold bridging site and nitrogen and oxygen were distributed equally on both of the two‐fold bridging sites, resulting in charge neutrality of the compound. The Si and Al atoms were distributed equally on their two crystallographic sites, referring to their elemental proportion in the compound, due to being poorly distinguishable by X‐ray methods. The chemical compositions of the compounds were derived from electron probe micro analyses (EPMA).     

Enhancing selectivity in oxidation catalysis with sol-gel nanocomposites

Valuable organic compounds such as alpha-hydroxy acids are easily synthesised with relevant selectivity enhancement using a sol-gel hydrophobized nanostructured silica matrix doped with the organocatalyst TEMPO: A materials science based synthetic route which cannot be achieved via classical homogeneous synthesis.     

Continuous flow hydroformylation of alkenes in supercritical fluid-ionic liquid biphasic systems

A process for the hydroformylation of relatively low volatility alkenes (demonstrated for 1-dodecene) in a continuous flow system is described. The catalyst is dissolved in an ionic liquid while the substrate and gaseous reagents are transported into the reactor dissolved in supercritical CO(2), which simultaneously acts as a transport vector for aldehyde products. Decompression of the fluid mixture downstream yields products which are free of both reaction solvent and catalyst. The use of rhodium complexes of triaryl phosphites leads to ligand degradation through reaction of the ionic liquid with water and subsequent attack of the released HF on the phosphite. Sodium salts of sulfonated phosphines are insufficiently soluble in the ionic liquids to obtain acceptable rates, but replacing the sodium by a cation similar to that derived from the ionic liquid, allows good solubility and activity to be obtained. The nature of the ionic liquid is very important in achieving high rates, with 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amides giving the best activity if the alkyl chain is at least C(8). Catalyst turnover frequencies as high as 500 h(-1) have been observed, with the better rates at higher substrate flow rates. Rhodium leaching into the product stream can be as low as 0.012 ppm, except at low partial pressures of CO/H(2), when it is significantly higher. Oxygen impurities in the CO(2) feed can lead to oxidation of the phosphine giving higher rates, lower selectivities to the linear aldehyde, increased alkene isomerization and greater leaching of rhodium. However, it is found that under certain process conditions, the supercritical fluid-ionic liquid (SCF-IL) system can be operated continuously for several weeks without any visible sign of catalyst degradation. Comparisons with commercial hydroformylation processes are provided.     

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.     

微孔和介孔材料中的热化学

这篇论文综述了美国加州大学戴维斯分校科学院院士Navrotsky课题组多年来在多孔材料上取得的一系列热化学研究结果。讨论了热化学对微孔、介孔材料的结构稳定性和合成过程的影响。借助多种测热手段对影响骨架结构的热焓、热熵和自由能进行了系统的测量和计算。研究数据表明一系列纯硅分子筛、介孔材料和磷酸铝多孔材料同相应的石英相和块磷铝矿相相比能量上最多只高出15 kJ·mol-1。一系列纯硅分子筛的熵值比石英相高出3.2—4.2 J·K-1·mol-1；在0—12.6 J·K-1·mol-1范围内相对应的自由能几乎没有差别。因此，对不同微孔、介孔材料，其骨架结构在能量上是几乎没有区别的。另外，本文通过介绍一种新型测热方法——原位测热，揭示了分子筛合成过程中的动力学和成核/结晶机理。