Chemical Reaction Effect on Convection in Bidispersive Porous Medium

Transport in Porous Media - The object of this study is to investigate the question of convective movement of a reacting solute in a viscous incompressible occupying a plane layer in a saturated...     

Application of molecularly imprinted polymers for electrochemical detection of some important biomedical markers and pathogens

The determination of biomedical markers and pathogens using electrochemical sensors is a well-established technique in which the transducer and the recognition element are used to detect the target molecule. There is a growing interest in molecularly imprinted polymer (MIPs) applications as promising recognition elements. The use of MIPs as recognition elements in electrochemical sensors offers the advantages of being fast, low cost, and, at the same time, provides accurate and selective results compared with other commonly applied routine methods for biomedical markers and pathogen detection. Compared with other nanomaterials and aptamer-based biosensors, MIP-based sensors offered excellent selectivity for low-priced reagents to be used. The aim of the current review is to discuss the most recent applications of MIP-based electrochemical sensors (2019–2021) as promising detection devices for some important biomarkers, enzymes, and pathogens, such as viruses, bacteria, and toxins.     

Utility of solid phase extraction for spectrophotometric determination of gold in water, jewel and ore samples

A highly sensitive, selective and rapid method for the determination μg L(-1) level of Au(III) based on the rapid reaction of Au(III) with 2,3-dichloro-6-(3-carboxy-2-hydroxy-1-naphthylazo)quinoxaline (DCHNAQ) and the solid phase extraction of the colored complex with a reversed phase polymer-based C18 cartridge have been developed. The DCHNAQ reacted with Au(III) to form a violet complex of a molar ratio 3:1 [DCHNAQ to Au(III)] in the presence of 5.0 M of phosphoric acid solution and Triton X-100 medium. This complex was enriched by the solid phase extraction with a polymer-based C18 cartridge. The enrichment factor of 100 was achieved. The molar absorptivity of the complex is 2.73×10(5) l mol(-1) cm(-1) at 633 nm in the measured solution. The system obeys Beer's law in the range of 0.02-1.30 μg ml(-1), whereas the optimum concentration ranges obtained from Ringbom plot was 0.08-1.24 μg ml(-1). The relative standard deviation for ten replicates sample of 0.6 μg ml(-1) level is 1.28%. The detection and quantification limits, are 6.1 and 19.5 ng ml(-1) in the original sample. This method was applied to the determination of gold in water, jewel and ore samples with good results comparing to the GFAAS method.     

Application of inorganic oxidants to the spectrophotometric determination of ribavirin in bulk and capsules

Eight spectrophotometric methods for determination of ribavirin have been developed and validated. These methods were based on the oxidation of the drug by different inorganic oxidants: ceric ammonium sulfate, potassium permanganate, ammonium molybdate, ammonium metavanidate, chromium trioxide, potassium dichromate, potassium iodate, and potassium periodate. The oxidation reactions were performed in perchloric acid medium for ceric ammonium sulfate and in sulfuric acid medium for the other reagents. With ceric ammonium sulfate and potassium permanganate, the concentration of ribavirin in its samples was determined by measuring the decrease in the absorption intensity of the colored reagents at 315 and 525 nm, respectively. With the other reagents, the concentration of ribavirin was determined by measuring the intensity of the developed colored reaction products at the wavelengths of maximum absorbance: 675, 780, 595, 595, 475, and 475 nm for reactions with ammonium molybdate, ammonium metavanidate, chromium trioxide, potassium dichromate, potassium iodate, and potassium periodate, respectively. Different variables affecting the reaction conditions were carefully studied and optimized. Under the optimum conditions, linear relationships with good correlation coefficients (0.9984-0.9998) were found between the absorbance readings and the concentrations of ribavirin in the range of 4-1400 microg/mL. The molar absorptivities were correlated with the oxidation potential of the oxidants used. The precision of the methods were satisfactory; the values of relative standard deviation did not exceed 1.64%. The proposed methods were successfully applied to the analysis of ribavirin in pure drug material and capsules with good accuracy and precision; the recovery values were 99.2-101.2 +/- 0.48-1.30%. The results obtained using the proposed spectrophotometric methods were comparable with those obtained with the official method stated in the United States Pharmacopeia.     

1,3,4‐Thiadiazole, 1,3,4‐thiadiazine, 1,3,6‐thiadiazepane and quinoxaline derivatives from symmetrical hydrazine‐1,2‐dicarbothioamide as well as N,N″‐ethane‐1,2‐diylbis(thiourea) derivatives

Reactions of N,N′‐disubstituted hydrazine‐1,2‐carbothioamides 8a‐c and substituted N,N″‐ethane‐1,2‐diylbis(thioureas) 9a‐c with 2,3,5,6‐tetrachloro‐1,4‐benzoquinone (chloranil, 10a ) and 2,3,5,6‐tetrabromo‐1,4‐benzoquinone (bromanil, 10b ) to form N,N′‐disubstituted 1,3,4‐thiadiazole‐2,5‐diamines 11a‐c , substituted 3‐amino‐6,7‐dichloro‐2,3‐dihydro‐1H‐4,2,1‐benzothiadiazine‐5,8‐diones 12a‐c , 2,3,7,8‐tetrahalothianthrene‐1,4,6,9‐tetrones 13a,b , substituted 5,6,8‐trihalo‐7‐oxo‐3,7‐dihydroquinoxaline‐2H‐carbothioamides 14a‐c, 15a‐c and 7‐substituted imino‐1,3,6‐thiadiazepane‐2‐thiones 16a‐c are reported.     

Quaternary n-Al0.08In0.08Ga0.84N/p-Si-based solar cell

Quaternary n-type Al_0.08In_0.08Ga_0.84N grown on p-Si using molecular beam epitaxy technique was fabricated as a pn-junction and an anti-reflection coating (ARC) of solar cells. The structural properties and surface morphology of the solar cells were investigated using scanning electron and atomic force microscopy. Optical reflectance was obtained using an optical reflectometery system (Filmetric F20-VIS). Current–voltage characteristics were examined under 100 mW cm^?2 illumination conditions. Quaternary n-type Al_0.08In_0.08Ga_0.84N coating was found to be an excellent ARC against incident light compared with other ARCs. This material also exhibited good light trapping over a wide wavelength spectrum, which produced highly efficient solar cells. The unique and strong polarization, as well as the piezoelectric effect, of the quaternary-nitrides was employed to reduce surface recombination velocities and enhance the solar cell performance. A solar cell with reasonable conversion efficiency of 9.74% was obtained when the n-Al_0.08In_0.08Ga_0.84N/p-Si was employed.     

Indirect spectrophotometric determination of gentamicin and vancomycin antibiotics based on their oxidation by potassium permanganate

Four simple, accurate, sensitive and economical procedures (A–D) for the estimation of gentamicin sulphate and vancomycin hydrochloride, both in pure form and in pharmaceutical formulations have been developed. The methods are based on the oxidation of the studied drugs by a known excess of potassium permanganate in sulphuric acid medium and subsequent determination of unreacted oxidant by reacting it with amaranth dye (method A), acid orange II (method B), indigocarmine (method C) and methylene blue (method D), in the same acid medium at a suitable λ_max=521, 485, 610 and 664 nm, respectively. The reacted oxidant corresponds to the drug content. Regression analysis of Beer-Lambert plots showed good correlations in the concentration ranges 4–8, 3–8, 4–9 and 5–9 μg ml⁻¹ with gentamicin and 4–8, 1.5–4, 1.5–4 and 3.5–5.5 μg ml⁻¹ with vancomycin for methods A, B, C, and D, respectively. The molar absorptivity, sandell sensitivity, detection and quantification limits were calculated. The stoichiometric ratios for the cited drugs were studied. The optimum reaction conditions and other analytical parameters were evaluated. The influence of the substance commonly employed as excipients with these drugs were studied. The proposed methods were applied to the determination of these drugs in pharmaceutical formulations. The results have demonstrated that the methods are equally accurate and reproducible as the official methods.