Strategic engineering of alkyl spacer length for a pH-tolerant lysosome marker and dual organelle localization

Long-term visualization of lysosomal properties is extremely crucial to evaluate diseases related to their dysfunction. However, many of the reported lysotrackers are less conducive to imaging lysosomes precisely because they suffer from fluorescence quenching and other inherent drawbacks such as pH-sensitivity, polarity insensitivity, water insolubility, slow diffusibility, and poor photostability. To overcome these limitations, we have utilized an alkyl chain length engineering strategy and synthesized a series of lysosome targeting fluorescent derivatives namely NIMCs by attaching a morpholine moiety at the peri position of the 1,8-naphthalimide (NI) ring through varying alkyl spacers between morpholine and 1,8-naphthalimide. The structural and optical properties of the synthesized NIMCs were explored by ¹H-NMR, single-crystal X-ray diffraction, UV-Vis, and fluorescence spectroscopy. Afterward, optical spectroscopic measurements were carefully performed to identify a pH-tolerant, polarity sensitive, and highly photostable fluoroprobes for further live-cell imaging applications. NIMC6 displayed excellent pH-tolerant and polarity-sensitive properties. Consequently, all NIMCs were employed in kidney fibroblast cells (BHK-21) to investigate their applicability for lysosome targeting and probing lysosomal micropolarity. Interestingly, a switching of localization from lysosomes to the endoplasmic reticulum (ER) was also achieved by controlling the linker length and this phenomenon was subsequently applied in determining ER micropolarity. Additionally, the selected probe NIMC6 was also employed in BHK-21 cells for 3-D spheroid imaging and in Caenorhabditis elegans (C. elegans) for in vivo imaging, to evaluate its efficacy for imaging animal models.

A series naphthalimide-based fluorophores were designed by alkyl spacer length engineering to discover a pH-tolerant lysosomal marker. This approach also allows to probe lysosome-related organelles in C. elegans and communication between organelles.     

Synthesis of 3‐aminomethylidenechroman‐2‐carboxamides by a Sequential One‐pot Three Component Reaction and by Post‐Passerini Condensation Modification

3‐Arylaminomethylidenechroman‐2‐carboxamide has been synthesized by a one‐pot three component reaction among 3‐formylchromone, aromatic amine, and cyclohexyl isocyanide. 3‐(N‐alkylsubstitued/unsubstituted)aminomethylidenechroman‐2‐carboxamides were synthesized by heating Passerini products derived from chromone‐3‐carbaldehyde with different aliphatic primary amines. The products obtained from the reactions of aliphatic primary amines readily form chromeno[2,3‐c]pyrrole when heated in acetic acid. Bischromanones have also been synthesized using this methodology.     

Indium-mediated vic-diallylation/propargylation of phenacyl bromides: a facile synthesis of 4-arylocta-1,7-dien-4-ol derivatives

Phenacyl bromides undergo smooth vic-diallylation and dipropargylation with allyl and propargyl indium reagents generated in situ from metallic indium and allyl or propargyl bromide to produce 4-arylocta-1,7-dien-4-ol derivatives in good yields. Phenacyl chloride and azide also participated effectively in bis-allylation. Similar results are also obtained from in situ generated allyl or propargyl zinc bromide.     

Synthesis, spectroscopic characterization and magnetic properties of homo- and heterodinuclear complexes of transition and non-transition metal ions with a new Schiff base ligand

Four homodinuclear complexes of Ni(II)-Ni(II), Cu(II)-Cu(II), Co(II)-Co(II) and Co(III)-Co(II) and five heterodinuclear complexes of Co(III)-Zn(II), Co(III)-Cu(II), Co(III)-Ni(II), Cu(II)-Zn(II) and Zn(II)-Cu(II) with the octadentate Schiff base compartmental ligand 1,8-N-bis(3-carboxy)disalicylidene-3,6-diazaoctane-1,8-diamine (H4fsatrien) have been synthesized. The complexes have been characterized with the help of elemental analyses, molecular weights, molar conductances, magnetic susceptibilities and spectroscopic (UV-vis, IR, ESR) data. Cryomagnetic data also helped to elucidate the structural features of the Cu(II) complexes.     

The solution behavior of poly(vinylpyrrolidone): its clouding in salt solution, solvation by water and isopropanol, and interaction with sodium dodecyl sulfate

This article deals with the solution properties of poly(vinylpyrrolidone) (PVP) in salt and surfactant environment. The cloud point (CP) of PVP has been found to be induced by the salts NaCl, KCl, KBr, Na2SO4, MgSO4, and Na3PO4. On the basis of CP values for a salt at different [PVP], the energetics of the clouding process have been estimated. The effect of the surfactant, sodium dodecyl sulfate (SDS), on the salt-induced CP has also been studied, and reduction in CP at low [SDS] and increase in CP at high [SDS] have been observed. The water vapor adsorption of PVP has been determined by isopiestic method. The results display a BET Type III isotherm whose analysis has helped to obtain the monolayer capacity of PVP and formation of multilayer on it. The solvation of PVP in a solution of water and a water-isopropanol mixture has been determined by conductometry from which contribution of the individual components were estimated. The interaction of PVP with SDS in solution led to formation of a complex entity, which has been studied also by conductometry adopting a binding-equilibrium scheme. SDS has been found to undergo two types of binding as monomers in the pre- critical aggregation concentration (CAC) range and as small clusters in the post CAC region. The stoichiometries of binding and binding constant were evaluated.     

Syntheses,structures and electrochemistry of manganese(III) complexes derived from N,N′-o-phenylenebis(3-ethoxysalicylaldimine): Efficient catalyst for styrene epoxidation

Syntheses, characterizations, electrochemistry and catalytic properties for styrene epoxidation of three manganese(III) compounds [Mn^IIIL¹(H₂O)(MeOH)](ClO₄) (1) [Mn^IIIL¹(N₃)(H₂O)]·dmf (2) [Mn^IIIL¹(Cl)(H₂O)] (3) derived from the Schiff base compartmental ligand N,N′-o-phenylenebis(3-ethoxysalicylaldimine) (H₂L¹) are reported. The three compounds are characterized by elemental analyses, IR, mass and UV–Vis spectra and conductance values. Single crystal X-ray structures of 1 and 2 have been determined. The structures of 1 and 2 show that these are mononuclear compounds having a salen type structure. In both structures, a dinuclear species is formed by bifurcated hydrogen bonding involving coordinated water molecule. The coordination of chloride in 3 is shown by conductance measurements. The compounds have also been characterized by UV–Vis and mass spectroscopic studies. Cyclic voltammetric and square wave voltammetric studies of the three compounds reveal that these undergo Mn(III)/Mn(II) reduction reversibly with the order of the ease of reduction as 3 > 2 > 1. This order has been explained proposing the composition of active species in solution. Catalytic properties for epoxidation of styrene by all the three complexes using PhIO and NaOCl as oxidant have been studied. The order of both the styrene conversion and styrene epoxidation using the three title compounds is 3 > 1 > 2. Again, it has been observed that more efficient conversion and epoxidation take place when PhIO is used as oxidant.     

Effects of chain length and heat treatment on the nanotribology of alkylsilane monolayers self-assembled on a rough aluminum surface

The conformational order of alkylsilane monolayers self-assembled on a rough aluminum surface is affected by the molecular chain length and the thermal history of the sample. These monolayers have been characterized by grazing angle FTIR spectroscopy. Tribological mechanisms were explored using initial molecular conformation order, sliding distance, normal load, and substrate compliance as experimental variables. Results indicate that the initial conformational disorder of the molecules determines the level of friction at the commencement of sliding. Adverse changes in dynamic friction and monolayer life during sliding are not thermally induced but are related to substrate roughness and local plasticity. Plastic deformation reduces the spatial density of the alkylsilane monolayer and is accentuated by an increase in the normal load.     

Langmuir-Blodgett films of 9-phenyl anthracene molecules incorporated into different matrices

This communication reports the surface pressure (pi) versus area per molecule (A) isotherm characteristics of the mixed films of 9-phenyl anthracene (PA) in stearic acid (SA) and polymethyl methacrylate (PMMA) matrices, at the air-water interface. The mixed Langmuir films at the air-water interface have been observed to be easily transferred onto solid substrates to form uniform Langmuir-Blodgett films. By changing various parameters, namely molefraction, surface pressure of lifting and number of layers, the mixed Langmuir-Blodgett (LB) films of various types have been fabricated successfully and their spectroscopic characteristics have been reported. From the isotherm characteristics and the area per molecule versus molefraction plot, it is evident that the PA molecules are successfully incorporated into mixed Langmuir-Blodgett films. UV-vis absorption spectroscopic study of the mixed LB films at various molefractions of PA in two different matrices reveal that formation of I-type aggregate in PMMA matrix whereas both I- and H-type aggregates are playing their dominant role in SA matrix. Moreover, fluorescence spectroscopic study reveals reabsorption effect. Molecular movement persists in the freshly prepared LB films, as is evident from the time dependent changes in both UV-vis absorption and fluorescence spectra of the mixed LB films in both matrices. From our observation it is evident that about 200 h is required to get the LB films in a stable condition. Dimers and higher order n-mers are formed at a higher surface pressure of 30 mNm(-1).     

Fibrillar Networks of Glycyrrhizic Acid for Hybrid Nanomaterials with Catalytic Features

Self‐assembly of the naturally occurring sweetening agent, glycyrrhizic acid (GA) in water is studied by small‐angle X‐ray scattering and microscopic techniques. Statistical analysis on atomic force microscopy images reveals the formation of ultralong GA fibrils with uniform thickness of 2.5 nm and right‐handed twist with a pitch of 9 nm, independently of GA concentration. Transparent nematic GA hydrogels are exploited to create functional hybrid materials. Two‐fold and three‐fold hybrids are developed by introducing graphene oxide (GO) and in situ‐synthesized gold nanoparticles (Au NPs) in the hydrogel matrix for catalysis applications. In the presence of GO, the catalytic efficiency of Au NPs in the reduction of p‐nitrophenol to p‐aminophenol is enhanced by 2.5 times. Gold microplate single crystals are further synthesized in the GA hydrogel, expanding the scope of these hybrids and demonstrating their versatility in materials design.     

Proton‐Conducting Magnetic Coordination Polymers

Three isostructural lanthanide‐based two‐ dimensional coordination polymers (CPs) {[Ln₂(L)₃(H₂O)₂]_n ? 2n CH₃OH) ? 2n H₂O} (Ln=Gd³⁺ ( 1 ), Tb³⁺ ( 2 ), Dy³⁺ ( 3 ); H₂L=cyclobutane‐1,1‐dicarboxylic acid) were synthesized by using a low molecular weight dicarboxylate ligand and characterized. Single‐crystal structure analysis showed that in complexes 1 – 3 lanthanide centers are connected by μ₃‐bridging cyclobutanedicarboxylate ligands along the c axis to form a rod‐shaped infinite 1D coordination chain, which is further linked with nearby chains by μ₄‐connected cyclobutanedicarboxylate ligands to form 2D CPs in the bc plane. Viewing the packing of the complexes down the b axis reveals that the lattice methanol molecules are located in the interlayer space between the adjacent 2D layers and form H‐bonds with lattice and coordinated water molecules to form 1D chains. Magnetic properties of complexes 1 – 3 were thoroughly investigated. Complex 1 exhibits dominant ferromagnetic interaction between two nearby gadolinium centers and also acts as a cryogenic magnetic refrigerant having a significant magnetic entropy change of ?ΔS_m=32.8 J kg^?1 K^?1 for ΔH=7 T at 4 K (calculated from isothermal magnetization data). Complex 3 shows slow relaxation of magnetization below 10 K. Impedance analysis revealed that the complexes show humidity‐dependent proton conductivity (σ=1.5×10^?5 S cm^?1 for 1 , σ=2.07×10^?4 S cm^?1 for 2 , and σ=1.1×10^?3 S cm^?1 for 3 ) at elevated temperature (>75 °C). They retain the conductivity for up to 10 h at high temperature and high humidity. Furthermore, the proton conductivity results were correlated with the number of water molecules from the water‐vapor adsorption measurements. Water‐vapor adsorption studies showed hysteretic and two‐step water vapor adsorption (182000 μL g^?1 for 1 , 184000 μL g^?1 for 2 , and 1874000 μL g^?1 for 3 ) in the experimental pressure range. Simulation of water‐vapor adsorption by the Monte Carlo method (for 1 ) confirmed the high density of adsorbed water molecules, preferentially in the interlayer space between the 2D layers.