POOL — Listing service in game theory no. 17

POOL — Listing service in game theory no. 17     

Three-stage auto-ignition of n-heptane and methyl-cyclohexane mixtures at lean conditions in a flat piston rapid compression machine

One approach to enhancing the thermal efficiency of combustion systems is to burn fuels at ultra-lean conditions (equivalence ratio below 0.5). It has been recently reported that the auto-ignition of some hydrocarbon fuels, under specific temperature, pressure, and mixture conditions, releases heat in three distinctive stages. The three auto-ignition stages can be divided as a first low-temperature auto-ignition stage with conventional low temperature, and a high-temperature stage separated into two sub-stages. This study presents ignition delay time measurements of n-heptane and methyl-cyclohexane (MCH) mixtures in a flat piston rapid compression machine (RCM) under ultra-lean conditions. It provides experimental evidence of three-stage auto-ignition. This phenomenon of delayed high-temperature heat release is seldom reported in the literature and this is the first time to be reported for these types of fuels. The experiments cover two binary n-heptane/MCH mixtures of 15/85 and 70/30 by volume, pressures of 11 bar and 16 bar, temperature range of 700 to 900 K, and equivalence ratio of 0.4. The RCM optical access was utilized for high-speed chemiluminescence imaging. Detailed chemical kinetic simulations in a homogenous batch reactor with variable volume were conducted to further interrogate the three-stage auto-ignition phenomenon. Chemiluminescence shows that three-stage auto-ignition occurs in the adiabatically compressed end-gas, which indicates that this phenomenon is chemically-driven and is not induced by a thermal stratification in the RCM experiments. The model predicts the features of three-stage auto-ignition, which were experimentally observed at temperatures approximately below 750 K. As expected, significant discrepancies are observed in the ignition delays of experiment and simulation in the negative temperature coefficient (NTC) region. The simulation of the n-heptane/MCH 70/30 mixture shows better agreement with experiments in the Positive Temperature Coefficient (PTC) region compared to the 15/85 mixture.     

The influence of distal substitution on the base-induced isomerization of long-chain terminal alkynes

When compared to a long-straight chain terminal alkyne, a long chain terminal alkyne with a distal isopropyl unit (isobranched) isomerizes about two times faster when treated with strong base under identical conditions, and appears to follow pseudo first order kinetics. In both cases, equilibration to a 95–97:5–3 mixture of terminal:internal alkyne accompanies isomerization. The difference in rate may be due to an unusual folding of both long-chain alkynes, bringing the distal substituent close to the carbon-carbon-triple bond moiety. The distal isopropyl moiety may provide unanticipated steric hindrance that disrupts such folding, making the propargylic proton more available for reaction with base.     

THE DYNAMIC BUCKLING OF AN ORTHOTROPIC CYLINDRICAL THIN SHELL UNDER TORSION VARYING AS A POWER FUNCTION OF TIME

The subject of this investigation is to study the buckling of orthotropic cylindricalthin shells under torsion,which is a power function of time.The dynamic stability and compati-bility equations are obtained first.These equations are subsequently reduced to a time dependentdifferential equation with variable coefficient by using Galerkin's method.Finally,the critical dy-namic and static loading,the corresponding wave numbers,the dynamic factors,critical time andcritical impulse are found analytically by applying the Ritz type variational method.Using thoseresults,the effects of the variations of the power of time in the torsion load expression,of theloading parameter,the ratio of the Young's moduli and the ratio of the radius to thickness onthe critical parameters are studied numerically.It is observed that these factors have appreciableeffects on the critical parameters of the problem in the heading.     

Facile and convenient synthesis of new thieno[2,3-b]-thiophene derivatives

A facile and convenient synthesis of bis(2-(1H-benzo[d]imidazol-2(3H)-ylidene)-3-oxopropanenitrile), bis((3-amino-5-(methylthio)-1H-pyrazol-4-yl)methanone) and bis(2-thioxo-1,2-dihydropyrimidine-5-carbonitrile) derivatives incorporating a thieno- [2,3-b]thiophene moiety via versatile, readily accessible diethyl 3,4-dimethylthieno-[2,3-b]thiophene-2,5-dicarboxylate is described.     

Investigating droplet separation efficiency in wire-mesh mist eliminators in bubble column

Effects of design parameters on performance of wire-mesh mist eliminators were experimentally investigated in 15 cm bubble column. The demisters performances were evaluated by droplet collection efficiency as a function of wide ranges of operating and design parameters. These parameters include: droplet size exiting the demister (250–380 μm), specific surface area (236–868 m²/m³), void fraction (97–98.3%), wire diameter (0.14–0.28 mm), packing density (130–240 kg/m³), and superficial gas velocity (0.109–0.118 m/s. All demisters were 15 cm in diameter with 10 cm pad thickness, made from 316L stainless steel layered type demister pad wires. Experiments were carried out using air–water system at ambient temperature and atmospheric pressure. The experimental data on the droplet removal efficiency were obtained using Malvern Laser Droplet Sizer. The removal efficiency was found to increase with the increasing the demister specific surface area, packing density, and superficial gas velocity. In contrast, the removal efficiency was found to increase with decreasing the demister void fraction and wire diameter. The separation efficiency is correlated empirically as a function of the design parameters. A good agreement was obtained between the measured values and the correlation predictions with ±5% accuracy.     

Spectrofluorimetric determination of fexofenadine hydrochloride in pharmaceutical preparation using silver nanoparticles

A novel sensitive fluorimetric method was investigated for the assay of fexofenadine hydrochloride (FEX) using silver nanoparticles (NPs) as a fluorescence probe. The NPs, which were prepared by chemical reduction of silver nitrate with sodium borohydride (reducing agent) in aqueous solution (without organic stabilizers) were water soluble, stable and had narrow emission band. The addition of drug to NPs solution caused considerable quenching of the emission band of silver NPs, which was likely due to the complexation of the drug to silver NPs. Under the optimum conditions, the quenched fluorescence (FL) intensity was linear with the concentration of FEX in the range of 1 × 10^?7 to 2.5 × 10^?5 mol L^?1 (0.9985) with a detection limit of 1.2 × 10^?8 mol L^?1. The quenching mechanism of the studied drug on the emission band of silver NPs was explained by Stern–Volmer law. The developed method was applied to FEX determination in a pharmaceutical formulation (allegra tablets) and biological fluids (human serum and urine).     

Reinforcement of natural rubber/high density polyethylene blends with electron beam irradiated liquid natural rubber-coated rice husk

Coating of rice husk (RH) surface with liquid natural rubber (LNR) and exposure to electron beam irradiation in air were studied. FTIR analysis on the LNR-coated RH (RHR) exposed to electron beam (EB) showed a decrease in the double bonds and an increase in hydroxyl and hydrogen bonded carbonyl groups arising from the chemical interaction between the active groups on RH surface with LNR. The scanning electron micrograph showed that the LNR formed a coating on the RH particles which transformed to a fine and clear fibrous layer at 20 kGy irradiation. The LNR film appeared as patches at 50 kGy irradiation due to degradation of rubber. Composites of natural rubber (NR)/high density polyethylene (HDPE)/RHR showed an optimum at 20–30 kGy dosage with the maximum stress, tensile modulus and impact strength of 6.5, 79 and 13.2 kJ/m², respectively. The interfacial interaction between the modified RH and TPNR matrix had improved on exposure of RHR to e-beam at 20–30 kGy dosage.