A Novel Tunable Dual-frequency Laser with Large Frequency Difference

This paper proposed a novel tunable dual frequency laser with large frequency difference,which used LD to pump the Nd∶YAG microchip in the end surface and put the liquid pressure on the radial direction of the crystal by a pressure-transporting thin film. As a result of the stress birefringence, there was a mode splitting phenomenon of the microchip laser longitudinal mode. Both theoretical analysis and experiments indicated that there is a directly proportional relation between the frequency difference and the pressure, so the tunable frequency difference could be obtained when the pressure was changed. A large frequency difference of about 3.4 GHz with linear tunable relation was achieved in the experiment,so it can be a practical light source for the absolute distance interferometry.     

Optical Feedback Characteristics in He-Ne Dual Frequency Lasers

Optical feedback characteristics in He-Ne dual frequency lasers are studied systematically in different feedback power ratios with a variable attenuator. Feedback power ratios vary from 0.010 up to 0.998. Five distinct regimes of self-interference effects are found and defined as regimes Ⅰ, Ⅱ,Ⅲ,Ⅳand Ⅴ. Accordingly, five optical feedback levels have been put forward in He-Ne dual frequency lasers. Strong mode competitions are observed in regimes Ⅲ and Ⅳ. In regime Ⅴ, multiple feedback effects are investigated. The basic theoretical analysis is also presented. Our results can advance the research of self-mixing interferometer and displacement sensor of He-Ne orthogonally polarized dual frequency lasers.     

一类低反射率分形膜系的设计

讨论了一类分形电磁波吸收膜层的设计.基于一种简化模型解析计算了膜系反射率,并得出了一系列选择膜层材料以降低反射率的判据.对由这些判据所选的一些理想和实际材料所构成的膜系的反射率进行了数值模拟.结果表明,符合材料判据构成的分形膜系的反射率会随分形级数的增加而逐渐降低.最低的平均反射率为0.01. 关键词： 分形 薄膜系 电磁波吸收     

芴与苯并硒化二唑共聚物的电子结构和光谱性质的理论研究

用密度泛函B3LYP方法对低聚体(DEF-BSeD)n(n=1~4)[其中9,9二乙基芴(DEF)单元与苯并硒化二唑(BSeD)单元的摩尔比分别为1∶1和2∶1]进行全优化, 计算电离能(PI)、电子亲和势(EA)和能隙(ΔH-L), 在基态结构的基础上用TD-DFT和ZINDO方法计算激发能和电子吸收光谱, 并利用外推法得到高聚物的相应性质. 从外推结果看出, 随着聚合物中BSeD比例的增大, 聚合物的最低单激发能呈减小的趋势, 最大电子吸收光谱红移. 用CIS方法优化得到单体的S1激发态结构, 计算结果表明, 激发态的结构更趋近于平面构型.     

几种新型LD泵浦Nd∶YAG双频激光器

介绍了几种LD泵浦Nd∶YAG双频激光器 ,均应用双折射原理实现。一类是利用自然双折射效应 ,在激光谐振腔内加入自然双折射元件 ;另一类则是对YAG晶片加压力 ,使YAG晶片本身成为应力双折射元件。由于双折射效应使激光在谐振腔内产生偏振方向互相垂直的寻常光 (o光 )和非寻常光 (e光 )两种成分。因为o光和e光在双折射元件中有着不同的折射率 ,因此一个激光谐振腔变成了具有两个物理长度的谐振腔 ,从而产生双频激光。改变自然双折射元件或对YAG晶片施加的压力 ,可调谐频差。实验中获得 10 9Hz量级的大频差 ,合成波长可到几十毫米 ,适用于绝对距离干涉测量     

Laser Micro-beam Manipulation System for Cells

This paper introduces a laser micro-beam system for cells manipulation. The laser micro-beam system comprises a laser scissors and a laser tweezers, which are focused by a Nd∶YAG laser and a He-Ne laser through a microscope objective, respectively. Not only the overall design of the laser micro-beam system is discussed, but also the design and choice of the critical components. A laser micro-beam system was constructed and anticipated experiment results were gained. Yeast cells can be successfully manipulated with the laser tweezers. Chromosomes can be successfully incised with the laser scissors.     

The research of used in aircraft optical windows sensor systems

The optical windows used in aircrafts protect their imaging sensors from environmental effects. Considering the imaging performance, flat surfaces are traditionally used in the design of optical windows. For aircrafts operating at high speeds, the optical windows should be relatively aerodynamic, but a flat optical window may introduce unacceptably high drag to the airframes. The linear scanning infrared sensors used in aircrafts with, respectively, a flat window, a spherical window and a toric window in front of the aircraft sensors are designed and compared. Simulation results show that the optical design using a toric surface has the integrated advantages of field of regard, aerodynamic drag, narcissus effect, and imaging performance, so the optical window with a toric surface is demonstrated to be suited for this application.     

基于苯并噻二唑和硅芴的一系列红光材料的载流子传输性质及荧光性质(英文)

用密度泛函理论(DFT)方法研究了基于苯并噻二唑和硅芴的一系列聚合物的基态和激发态结构、传输和荧光性质.聚合物的能隙、电离能、电子亲和势、最低激发能以及吸收光谱通过外推法得到.结果表明空穴、电子注入和传输性质受苯并噻唑在硅芴上的位置以及正丁基在噻吩上的位置影响很大.(SiF2-DHTBT1-m)n和(SiF1-DHTBT1-m)n(SiF和DHTBT分别代表硅芴和4,7-二(2-噻吩基)-2,1,3-苯并噻二唑)表现出较好的空穴和电子注入性质,而(SiF1-DHTBT1-o)n和(SiF1-DHTBT1-p)n的电荷注入性质较差.除(SiF1-DHTBT1-o)n外,聚合物的荧光光谱处于红光范围.     

[Os（PH3）2（CN）2（N^N）]配合物的溶剂化显色效应

采用HF/DFT的混合泛函PBE0和UPBE0优化了配合物[Os(PH3)2(CN)2(N^N)](其中N^N=2,2′-吡啶)的基态和激发态结构.在基态和激发态结构的基础上,利用含时密度泛函理论(TD-DFT)方法,结合极化连续介质(PCM)模型分别计算了它在二氯甲烷(1)、甲醇(2)、气态(3)和乙腈(4)溶液中的吸收和发射光谱.研究结果表明:优化得到的几何结构参数和相应的实验值符合得非常好.在极性较大的溶剂(2和4)中Os—P(1)和Os—C(1)键较长,Os—N(3)键较短,溶剂的极性会影响配合物的电子云分布.配合物在1-4溶剂中的最低能吸收和发射均来自分子轨道68→71的激发,该激发被指认为[d(Os)+π(CN)+π(N^N)→π*(N^N)]的跃迁具有混合的MLCT/LLCT特征.配合物在1-4溶剂中的最低能吸收和发射分别在471,410,488和445nm以及598,536,634和545nm,表明随着溶剂极性的逐渐增大(3<1<4<2),最低能吸收和发射发生明显的蓝移.这显示出通过改变溶剂极性可以调节配合物的发光颜色.