固体发动机药柱粘结试件的三维应力分析

推进剂／衬层／绝热层矩形粘结试件已作为随发动机测试试件，用于监控药柱最薄弱的推进剂／衬层界面粘结质量。由于试件较厚，又材料具有粘弹特性，因此应对它进行三维粘弹性有限元分析。本文分析了推进剂／衬层界面附近的应力分布情况，并给出试件启裂点有效应力与拉伸平均应力之比的集中系数，供药柱结构完整性分析人员使用     

光纤加速度传感器

介绍开环和闭环两种光纤加速度传感器的特点、工作原理和结构简图，论述了温度对开环光纤加速度计的影响，以及解决此影响的方法，并给出了消除温度漂移误差的系统框图。     

定速拉伸的固体推进剂双轴板条的应力分析

对固体推进剂双轴板条试件进行了有限元分析，并考虑了粘弹性对应力结果的影响，分析结果表明，双轴板条试件中心域为平面应变状态，与发动机药柱中部内孔表面相似，并给出了计算杨氏模量所需的修正系数。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

距离拖引干扰对几种脉冲雷达的干扰效果分析

借助于雷达信号的模糊函数，分析了距离拖引干扰对非脉压雷达、线性调频脉压雷达和二相编码脉压雷达的干扰效果，且进行了比较，得到了一些有用的结果。     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

ILD智能交通流量测试仪

介绍一种交通流量测试仪，它具有高灵敏度、高信噪比、传输距离远，可以准确地测量机动车、自行车流量，且成本低。由于该仪器设置了驱动变送器，采用了一种新的传输结构，引入了微机技术，模式识别等技术，从而研制出性能稳定、操作方便、实用性强且具有国际先进水平的道路交通流量测试装置。     

关于BAYLY PCM安装使用的几点心得

在数字通信中，脉冲编码调制（PCM）在光纤通信、数字微波通信和卫星通信等方面获得了相当广泛的应用。目前，民航北京、上海、广州三大区域管制中心中的华北大区甚高频建设已经接近尾声。甚高频建设显然要求具有容量大、传输可靠和误码率低等特点的光纤传输。在这一背景下，具有上述特点的光纤传输对于甚高频建设具有不可忽视的重要意义。华北大区甚高频项目采用了加拿大BAYLY公司的PCM设备作为光纤传输的中继设备，与电信光缆构成了大区甚高频传输的主用通路（备用通路由复用器与卫星通信构成）。作为参加华北大区甚高频建设的一员，笔者曾参与安装内蒙古地区七个站点的BAYLY PCM，在具体的安装和使用过程中发现了BAYLY PCM的一些优缺点，有些心得体会，现将其列出，与大家探讨和商榷，以期更好地使用该设备，从而进一步提高光纤传输的效能和稳定性，为整个甚高频大区建设做出有力的保障。     

画幅式层析成像光谱系统设计和实验研究

文章介绍一种无需时间或空间扫描的新型成像光谱仪—利用位相光栅作为分束器件的计算层析成像光谱仪 (CTIS)。重点介绍了各个系统的设计原则和位相光栅的设计 ,并给出了光栅的设计结果。详细介绍系统矩阵的实验定标方法和过程。叙述了自然光照明条件下真实物体组成的靶标的光谱成像实验 ,对目标实验采样的数据进行重构处理 ,给出了实验结果。