Environmental Chemistry Letters - Underground pollution of soils and sediments is a major yet overlooked health issue, because pollutants are often trapped into inaccessible and complex... 相似文献
The investigation of municipal solid waste (MSW) treatment in China is rare due to its sensitivity and difficulty in terms of access. We chose Beijing, the capital of China, as an example to identify the characteristics of MSW landfill treatments using a 2-month investigation with 20 participants. MSW landfill treatments account for nearly 70% of the annual MSW disposal in Beijing; the landfill processes are equipped with many kinds of technologies and consume a large amount of energy and produce a variety of contaminants. The cover method (the most obvious difference in landfill tamping) mainly includes high-density polyethylene (HDPE) geomembranes with loess and soil alone (i.e., loess or sandy soil). We investigated the actual conditions of landfills and collected data on leachate and landfill gas (LFG) emissions and energy consumption during 2009–2011. The results indicated that the cover method employed by landfills was related to treatment quantity, operation, and especially landfill location. Early large-scale landfills located in plains were covered with HDPE geomembranes, and newly built landfills covered with soil tended to be equipped with HDPE covers. Using HDPE cover also contributed greatly to LFG production due to its impermeability but had no remarkable effect on leachate yield reduction due to the dry climate in Beijing. The potential was reinforced by the potentials of decrement and reuse. The disposal method of LFG can be optimized, and the power generated by the LFG process can meet the landfill demand. The gray water recycled from the leachate could be used in the landfill process.
• The total organic pollutant concentrations in sediment were 27.4-1620 ng/g.• The phenol concentrations were relatively high in the sediment of the Dianchi Lake.• Average total concentrations decreased as follows: Caohai>Waihai>Haigeng Dam.• 1,4-dichlorobenzene, 3- or 4-methylphenol, 1,2,4-trichlorobenzene might be risks. Organic pollutants are widespread environmental pollutants with high toxicity, persistence, and bioaccumulation. Our aim was to investigate the distribution of aromatic amines, phenols, chlorobenzenes, and naphthalenes in the surface sediment of the Dianchi Lake, China. Nineteen surface sediment samples were collected from the Dianchi Lake, and 40 types of organic pollutants were analyzed via gas chromatography–mass spectrometry. The total organic pollutant concentrations in the surface sediment of the Dianchi Lake varied from 27.4 to 1.62 × 103 ng/g. The concentrations of phenols were much higher than those in other water bodies but still within a controllable range, whereas the concentrations of the other organic pollutant classes were similar or even lower. The detection ratio of 3- or 4-methylphenol was the highest (100.00%) among the pollutants. The average total organic pollutant concentrations decreased in the following order: Caohai (540 ng/g)>the middle of Waihai (488 ng/g)>the edge of Waihai (351 ng/g)>Haigeng Dam (90.4 ng/g). Pearson analysis showed a strong correlation among 1-methylnaphthalene, 2-methylnaphthalene, 1,3-dinitronaphthalene, and 1,4-dinitronaphthalene (p<0.01). Caohai, the north lakeshore of Waihai and the south of Waihai showed higher risk because of high concentration; meanwhile, 1,4-dichlorobenzene, 3- or 4-methylphenol and 1,2,4-trichlorobenzene were more likely to cause risks. 相似文献
• The Taihang Mountains was the boundary between high and low pollution areas. • There were one high value center for PM2.5 pollution and two low value centers. • In 2004, 2009 and after 2013, PM2.5 concentration was relatively low. Over the past 40 years, PM2.5 pollution in North China has become increasingly serious and progressively exposes the densely populated areas to pollutants. However, due to limited ground data, it is challenging to estimate accurate PM2.5 exposure levels, further making it unfavorable for the prediction and prevention of PM2.5 pollutions. This paper therefore uses the mixed effect model to estimate daily PM2.5 concentrations of North China between 2003 and 2015 with ground observation data and MODIS AOD satellite data. The tempo-spatial characteristics of PM2.5 and the influence of meteorological elements on PM2.5 is discussed with EOF and canonical correlation analysis respectively. Results show that overall R2 is 0.36 and the root mean squared predicted error was 30.1 μg/m3 for the model prediction. Our time series analysis showed that, the Taihang Mountains acted as a boundary between the high and low pollution areas in North China; while the northern part of Henan Province, the southern part of Hebei Province and the western part of Shandong Province were the most polluted areas. Although, in 2004, 2009 and dates after 2013, PM2.5 concentrations were relatively low. Meteorological/topography conditions, that include high surface humidity of area in the range of 34°‒40°N and 119°‒124°E, relatively low boundary layer heights, and southerly and easterly winds from the east and north area were common factors attributed to haze in the most polluted area. Overall, the spatial distribution of increasingly concentrated PM2.5 pollution in North China are consistent with the local emission level, unfavorable meteorological conditions and topographic changes. 相似文献
Herein, a novel direct Z-scheme photocatalyst was accomplished by hybridization of 0D MoS2 quantum dots (MSQDs) and 3D honeycomb-like conjugated triazine polymers (CTP) (namely, CTP-MSQD). The unique 0D/3D hierarchical structure significantly enhanced the exposure of active sites and light harvesting property, while the formed p-n junction enabled the direct strong interface coupling without the necessity of any mediators. The optimized CTP-MSQD3 exhibited continuously increased visible-light-driven photocatalytic activity and strong durability both in Cr(VI) reduction and H2 evolution, featured a rate of 0.069 min−1 and 1070 µmol/(hr∙g), respectively, which were 8 times than those of pure 3D-CTP (0.009 min−1 and 129 µmol/(hr∙g)). We believe that this work provides a promising photocatalyst system that combines a 0D/3D hierarchical structure and a Z-scheme charge flow for efficient and stable photocatalytic conversion. 相似文献