Contamination of marine fauna by chlordecone in Guadeloupe: evidence of a seaward decreasing gradient

Chlordecone is an organochlorine pesticide, used in the Lesser Antilles from 1972 to 1993 to fight against a banana weevil. That molecule is very persistent in the natural environment and ends up in the sea with runoff waters. The objective of the present study is to evaluate the level of contamination in several trophic groups of marine animals according to their distance from the source of pollution. Samples of suspended matter, macroalgae, herbivorous fishes, detrivorous crustaceans, zooplanktivorous fishes, first- and second-order of carnivorous fishes, and piscivorous fishes have been collected in two sites, located downstream the contaminated sites (Goyave and Petit-Bourg), in three marine habitats (coastal mangroves, seagrass beds located 1.5 km from the shoreline, and coral reefs at 3 km offshore). Animals collected in mangroves were the most contaminated (mean concentrations 193 μg kg^?1 in Goyave and 213 μg kg^?1 in Petit-Bourg). Samples from seagrass beds presented intermediate concentrations of chlordecone (85 μg kg^?1 in Goyave and 107 μg kg^?1 in Petit-Bourg). Finally, samples from coral reefs were the less contaminated (71 μg kg^?1 in Goyave and 74 μg kg^?1 in Petit-Bourg). Reef samples, collected 3 km offshore, were two to three times less contaminated than those collected in mangroves.     

Long-term dispersion and availability of metals from submarine mine tailing disposal in a fjord in Arctic Norway

Mining of Cu took place in Kvalsund in the Arctic part of Norway in the 1970s, and mine tailings were discharged to the inner part of the fjord, Repparfjorden. Metal speciation analysis was used to assess the historical dispersion of metals as well as their potential bioavailability from the area of the mine tailing disposal. It was revealed that the dispersion of Ba, Cr, Ni, Pb and Zn from the mine tailings has been limited. Dispersion of Cu to the outer fjord has, however, occurred; the amounts released and dispersed from the mine tailing disposal area quantified to be 2.5–10 t, less than 5% of Cu in the original mine tailings. An estimated 80–390 t of Cu still remains in the disposal area from the surface to a depth of 16 cm. Metal partitioning showed that 56–95% of the Cu is bound in the potential bioavailable fractions (exchangeable, reducible and oxidisable) of the sediments, totalling approximately 70–340 t, with potential for continuous release to the pore water and re-precipitation in over- and underlying sediments. Surface sediments in the deposit area were affected by elevated Cu concentrations just above the probable effect level according to the Norwegian sediment quality criteria, with 50–80% Cu bound in the exchangeable, reducible and oxidisable fractions, potentially available for release to the water column and/or for uptake in benthic organisms.     

Household water insecurity and its cultural dimensions: preliminary results from Newtok,Alaska

Using a relational approach, I examine several cultural dimensions involved in household water access and use in Newtok, Alaska. I describe the patterns that emerge around domestic water access and use, as well as the subjective lived experiences of water insecurity including risk perceptions, and the daily work and hydro-social relationships involved in accessing water from various sources. I found that Newtok residents haul water in limited amounts from a multitude of sources, both treated and untreated, throughout the year. Household water access is tied to hydro-social relationships predicated on sharing and reciprocity, particularly when the primary treated water access point is unavailable. Older boys and young men are primarily responsible for hauling water, and this role appears to be important to male Yupik identity. Many interviewees described preferring to drink untreated water, a practice that appears related to cultural constructions of natural water sources as pure and self-purifying, as well as concerns about the safety of treated water. Concerns related to the health consequences of low water access appear to differ by gender and age, with women and elders expressing greater concern than men. These preliminary results point to the importance of understanding the cultural dimensions involved in household water access and use. I argue that institutional responses to water insecurity need to incorporate such cultural dimensions into solutions aimed at increasing household access to and use of water.     

Water quality and health in northern Canada: stored drinking water and acute gastrointestinal illness in Labrador Inuit

One of the highest self-reported incidence rates of acute gastrointestinal illness (AGI) in the global peer-reviewed literature occurs in Inuit communities in the Canadian Arctic. This high incidence of illness could be due, in part, to the consumption of contaminated water, as many northern communities face challenges related to the quality of municipal drinking water. Furthermore, many Inuit store drinking water in containers in the home, which could increase the risk of contamination between source and point-of-use (i.e., water recontamination during storage). To examine this risk, this research characterized drinking water collection and storage practices, identified potential risk factors for water contamination between source and point-of-use, and examined possible associations between drinking water contamination and self-reported AGI in the Inuit community of Rigolet, Canada. The study included a cross-sectional census survey that captured data on types of drinking water used, household practices related to drinking water (e.g., how it was collected and stored), physical characteristics of water storage containers, and self-reported AGI. Additionally, water samples were collected from all identified drinking water containers in homes and analyzed for presence of Escherichia coli and total coliforms. Despite municipally treated tap water being available in all homes, 77.6% of households had alternative sources of drinking water stored in containers, and of these containers, 25.2% tested positive for total coliforms. The use of transfer devices and water dippers (i.e., smaller bowls or measuring cups) for the collection and retrieval of water from containers were both significantly associated with increased odds of total coliform presence in stored water (OR_{transfer device} = 3.4, 95% CI 1.2–11.7; OR_dipper = 13.4, 95% CI 3.8–47.1). Twenty-eight-day period prevalence of self-reported AGI during the month before the survey was 17.2% (95% CI 13.0–22.5), which yielded an annual incidence rate of 2.4 cases per person per year (95% CI 1.8–3.1); no water-related risk factors were significantly associated with AGI. Considering the high prevalence of, and risk factors associated with, indicator bacteria in drinking water stored in containers, potential exposure to waterborne pathogens may be minimized through interventions at the household level.     

Two sampling strategies for an overview of pesticide contamination in an agriculture-extensive headwater stream

Two headwaters located in southwest France were monitored for 3 and 2 years (Auvézère and Aixette watershed, respectively) with two sampling strategies: grab and passive sampling with polar organic chemical integrative sampler (POCIS). These watersheds are rural and characterized by agricultural areas with similar breeding practices, except that the Auvézère watershed contains apple production for agricultural diversification and the downstream portion of the Aixette watershed is in a peri-urban area. The agricultural activities of both are extensive, i.e., with limited supply of fertilizer and pesticides. The sampling strategies used here give specific information: grab samples for higher pesticide content and POCIS for contamination background noise and number of compounds found. Agricultural catchments in small headwater streams are characterized by a background noise of pesticide contamination in the range of 20–70 ng/L, but there may also be transient and high-peak pesticide contamination (2000–3000 ng/L) caused by rain events, poor use of pesticides, and/or the small size of the water body. This study demonstrates that between two specific runoff events, contamination was low; hence the importance of passive sampler use. While the peak pesticide concentrations seen here are a toxicity risk for aquatic life, the pesticide background noise of single compounds do not pose obvious acute nor chronic risks; however, this study did not consider the risk from synergistic “cocktail” effects. Proper tools and sampling strategies may link watershed activities (agricultural, non-agricultural) to pesticides detected in the water, and data from both grab and passive samples can contribute to discussions on environmental effects in headwaters, an area of great importance for biodiversity.     

Trace analysis of parabens preservatives in drinking water treatment sludge,treated, and mineral water samples

Parabens have been widely used as antimicrobial agents, mainly in food products, pharmaceuticals, and cosmetics. Although they are known as safe preservatives, they also cause some harm to human health, which has been discussed lately. Therefore, the aim of this study was to evaluate the occurrence of nine parabens (including isomers) in mineral and drinking waters, besides in drinking water treatment sludge (DWTS) samples with determination by liquid chromatography tandem mass spectrometry (LC-MS/MS). Both methods solid phase extraction (SPE) and QuEChERS were validated. Calibration curves showed a correlation coefficient of 0.99 for all compounds. LOQ values ranged from 0.04 to 4 μg L^?1 in aqueous matrices and from 5 to 500 ng g^?1 in DWTS. Recoveries between 70 and 115% were reached with RSD below 20% for all compounds in SPE whereas recoveries between 62 and 119% were found with RSD below 20% for almost all compounds in QuEChERS. Matrix effect had low values (<?20%); it was only above 20% for methylparaben in the SPE and for pentylparaben in the QuEChERS. Using a quick and simple extraction procedures with SPE, QuEChERS, and LC-MS/MS analyses, these methods proved to be selective and sensitive. They were successfully applied to real samples (treated water, mineral water, and sludge), and methylparaben was detected at concentration levels below 0.242 μg L^?1 in mineral and treated water samples and 10 ng g^?1 in DWTS samples.     

Life cycle of PCBs and contamination of the environment and of food products from animal origin

This report gives a summary of the historic use, former management and current release of polychlorinated biphenyls (PCBs) in Germany and assesses the impact of the life cycle of PCBs on the contamination of the environment and of food products of animal origin. In Germany 60,000 t of PCBs were used in transformers, capacitors or as hydraulic oils. The use of PCB oils in these “closed applications”, has been banned in Germany in 2000. Thirty to 50% of these PCBs were not appropriately managed. In West Germany, 24,000 t of PCBs were used in open applications, mainly as additive (plasticiser, flame retardant) in sealants and paints in buildings and other construction. The continued use in open applications has not been banned, and in 2013, an estimated more than 12,000 t of PCBs were still present in buildings and other constructions. These open PCB applications continuously emit PCBs into the environment with an estimated release of 7–12 t per year. This amount is in agreement with deposition measurements (estimated to 18 t) and emission estimates for Switzerland. The atmospheric PCB releases still have an relevant impact on vegetation and livestock feed. In addition, PCBs in open applications on farms are still a sources of contamination for farmed animals. Furthermore, the historic production, use, recycling and disposal of PCBs have contaminated soils along the lifecycle. This legacy of contaminated soils and contaminated feed, individually or collectively, can lead to exceedance of maximum levels in food products from animals. In beef and chicken, soil levels of 5 ng PCB-TEQ/kg and for chicken with high soil exposure even 2 ng PCB-TEQ/kg can lead to exceedance of EU limits in meat and eggs. Areas at and around industries having produced or used or managed PCBs, or facilities and areas where PCBs were disposed need to be assessed in respect to potential contamination of food-producing animals. For a large share of impacted land, management measures applicable on farm level might be sufficient to continue with food production. Open PCB applications need to be inventoried and better managed. Other persistent and toxic chemicals used as alternatives to PCBs, e.g. short chain chlorinated paraffins (SCCPs), should be assessed in the life cycle for exposure of food-producing animals and humans.     

Effects of different vermicompost extracts of palm oil mill effluent and palm-pressed fiber mixture on seed germination of mung bean and its relative toxicity

Several treatment technologies are available for the treatment of palm oil mill wastes. Vermicomposting is widely recognized as efficient, eco-friendly methods for converting organic waste materials to valuable products. This study evaluates the effect of different vermicompost extracts obtained from palm oil mill effluent (POME) and palm-pressed fiber (PPF) mixtures on the germination, growth, relative toxicity, and photosynthetic pigments of mung beans (Vigna radiata) plant. POME contains valuable nutrients and can be used as a liquid fertilizer for fertigation. Mung bean seeds were sown in petri dishes irrigated with different dilutions of vermicomposted POME-PPF extracts, namely 50, 60, and 70% at varying dilutions. Results showed that at lower dilutions, the vermicompost extracts showed favorable effects on seed germination, seedling growth, and total chlorophyll content in mung bean seedlings, but at higher dilutions, they showed inhibitory effects. The carotenoid contents also decreased with increased dilutions of POME-PPF. This study recommends that the extracts could serve as a good source of fertilizer for the germination and growth enhancement of mung bean seedlings at the recommended dilutions.     

Potential sources and meteorological factors affecting PM<Subscript>2.5</Subscript>-bound polycyclic aromatic hydrocarbon levels in six main cities of northeastern Italy: an assessment of the related carcinogenic and mutagenic risks

A yearlong sampling campaign (2012–2013) was conducted in six major cities of the Veneto region to investigate the spatial-temporal trends and the factors affecting the polycyclic aromatic hydrocarbon (PAHs) variations and identify the local sources. Sixty samples per city were collected for analyses in every alternate month (April, June, August, October, December, and February): 10 samples per sampling site in 10 consecutive days of the months selected. Samples were ultrasonically extracted with acetonitrile and processed through high-performance liquid chromatography. Total Σ-PAH concentrations ranged from 0.19 to 70.4 ng m^?3 with a mean concentration of 11.5 ng m^?3. The mean benzo[a]pyrene (BaP) concentration reached 2.0 ng m^?3, which is two-times higher than the limit set by the European Union. BaP contributed for 17.4% to the total concentration of PAHs, which showed the same pattern across the region with maxima during cold months and minima in the warm period. In this study, PAHs showed an inverse relationship with temperature, solar radiation, wind speed, and ozone. According to this study, biomass burning for household heating and cooking, followed by gaseous PAHs absorption on particles due to low atmospheric temperature, were the main reasons for increasing PAHs concentration in winter. Health risk, evaluated as lifetime lung cancer risk (LCR), showed a potential carcinogenic risk from the airborne BaP_TEQ six-fold higher in the cold season than in the warm one. Diagnostic ratios and conditional probability functions were used to locate the sources, and results confirmed that local emission, overall domestic heating, and road transport exhausts were responsible for higher concentration rates of PAHs as well as of PM_2.5.     

Effects of site-specific climatic conditions on the radial growth of the lichen biomonitor <Emphasis Type="Italic">Xanthoria parietina</Emphasis>

The protocols commonly applied in surveys with lichens as biomonitors of airborne trace elements require analyses of samples derived from thalli or parts of thalli grown in the last year before sampling, under the postulation that samples of the same size are of the same age. Unfortunately, the influence of ecological site-specific factors on lichen growth is still largely ignored, so that samples of the same size collected in environmentally and climatically diverse sites might actually differ in age. This work aims at quantifying the influence of climatic conditions on the radial growth rates (RaGRs) of Xanthoria parietina, one of the most popular lichen biomonitors. RaGR was monitored in seven populations distributed along an altitudinal transect of 30 km in the Classical Karst (NE Italy), from 20 to 500 m above sea level. For c. 17 months, lobe growth was measured seasonally with a digital calliper, and site-specific climatic variables were monitored by means of thermo-hygrometric sensors and implemented by meteorological data. Finally, the lobe growth of X. parietina was modelled as a function of 18 environmental variables. Results revealed that thalli of relatively dry sites had significantly lower seasonal RaGR with respect to moister ones. Considering that cumulative precipitations were equally distributed along the transect, it was concluded that RaGR of X. parietina is affected negatively by high air temperatures and positively by high relative humidity. The importance of RaGR variation in lichen bioaccumulation studies is critically discussed.