GHS化学品危险性分类及其公示要素(上)

概述了全球化学品统一分类和标签制度（GHS）的产生背景、推行GHS的重要意义,介绍了GHS关于化学品危险性分类和公示要素的主要内容,评估了我国现行化学品危险性分类与GHS分类的差异点,并对我国全面实施GHS提出了若干对策建议。     

生物絮凝剂MBFGA1预处理乳制品加工废水

用生物絮凝剂MBFGA1预处理乳制品加工废水（简称废水）。实验结果表明,废水处理的水力条件为：以150r／min的转速搅拌30S,再以30r／min的转速搅拌20min;MBFGA1的最佳加入量为15mg／L;废水pH为4．0时,MBFGA1对废水的絮凝处理效果最好;废水温度对浊度、COD去除率有一定的影响,在20～45℃时,废水浊度的去除率始终保持在85％以上;30℃时,COD去除率达到最大值65．0％。     

尿素基纤维的制备及对水中Cu2+和Cd2+的吸附

以棉纤维为原料,经氯化和取代反应,制得尿素基纤维并用于水中Cu^2＋和Cd^2＋的吸附,考察了各种因素对吸附效果的影响。尿素基纤维对Cu^2＋和Cd^2＋的吸附可用Langmuir等温吸附方程描述,吸附过程可看成单层吸附。较佳吸附条件：重金属离子溶液pH为5,流量为7mL／min。用过的尿素基纤维经2mol／L的盐酸洗脱再生后,对Cu^2＋的吸附、解吸、再吸附的性能良好,可重复使用。     

从6-APA和7-ADCA生产废液中回收苯乙酸

采用溶剂萃取、水法提取等方法从6-氨基青霉烷酸和7-氨基-3-去乙酰氧基头孢烷酸生产废液（简称废液）中回收苯乙酸（PAA）,考察了各种因素对回收效果的影响。实验结果表明：以甲苯为萃取剂,在萃取温度30℃、萃取时间15m in、500mL废液中萃取剂加入量130mL的最佳条件下,萃取率为96.5%;在提取温度为65℃左右、结晶温度低于10℃的条件下,PAA收率大于89%,纯度大于99%;所得PAA产品质量好,可用于青霉素G等医药产品的生产。     

用改性海泡石处理含磷废水

以海泡石为原料,经盐酸活化、水热活化,再加入氯化镁、氯化铁复合制得除磷剂原粉;再用聚氯乙烯将除磷剂原粉黏合成粒状除磷剂。用粒状除磷剂对废水中的磷（PO4^3-）进行吸附、洗脱,考察除磷剂的循环使用性能。实验结果表明：除磷剂对废水中磷的吸附容量可达92m g/g以上;以碳酸钠为洗脱剂,磷的洗脱率可达90%以上;除磷剂可重复使用,且性能优良。     

采用两段SBR工艺处理石化废水

采用两段序批式活性污泥反应器（SBR）工艺处理高浓度石化废水,考察了DO、MLSS、反应温度对废水处理效果的影响。实验结果表明,两段SBR系统中有机物降解存在着不同的作用机理,第一段主要以去除易降解有机物为主,第二段主要以去除难降解有机物为主。在进水COD为4000mg／L、SBR1中DO为4～5mg／L、MLSS为5000mg／L,SBR2中DO为2～4mg／L、MLSS为3000mg／L、反应温度约为20℃的条件下,废水COD去除率达90％以上。     

Leachability of municipal solid waste ashes in simulated landfill conditions

In Japan the volume of municipal solid waste is reduced by incineration, with fly ash and bottom ash disposed in controlled landfills. The leachability of anions and heavy metal cations, Zn, Cu and Pb, from MSW fly ash and bottom ash at different pHs was examined using batch- and column-leaching tests. The MSW ashes had a high capacity for neutralizing acids. Behaviour during leaching depended on the pH of the solution. For the volumes applied, the leachabilities of MSW fly ash were very similar at pHs from 3 to 6. Due to its amphoteric nature, Pb is leachable at pHs of approximately 10 or more, with leachate concentrations of about 3 and 3-10mg/L for the fly ash and bottom ash, respectively, much higher than for Zn and Cu. Pb concentrations for most leaching solutions were 1 and 3mg/L for the fly ash and bottom ash, respectively. Zn, and Cu leached at low concentrations for solutions of pH 3-6. Na and K ions leached at high concentrations of approximately 5000 mg/L in the first batch leaching test, decreasing to 10mg/L by the fourth leach. Ca and Mg ions leached more gradually than Na and K. Cl(-) and SO(4)(2+) ions were the major anions in the MSW ash. The high pH and cation leaching are expected to have negative impacts on the performance of clay liners.