Thiram‐induced toxic liver injury in male sprague‐dawley rats

Abstract

A single i.p. dose (120 mg/kg) of thiram given to male Sprague‐Dawley rats caused a significant increase in the activity of SGOT and SGPT 24 hr post‐treatment indicating liver damage. A considerable diminution in the serum cholinesterase activity was also noted in the treated rats as against the control animals. Additional evidence for thiram‐induced liver toxicity is provided by the observation that there was approximately 50% inhibition of the activity of hepatic microsomal benzphetamine N‐demethylase with a concomitant decrease in the concentration of cytochrome P‐450, an important component of the mixed‐function oxidase system. Although not significant, hepatic glutathione levels were also depleted by thiram, probably making the liver susceptible to toxic injury.     

An Investigation of Flashing-Driven Natural Circulation

Natural circulation driven boiling systems are extensively used for passive heat removal, such as in nuclear power plants. The flashing phenomenon and the associated flow instabilities in a natural circulation loop are reported here. An experimental facility is constructed with a heater, an adiabatic riser, a condenser and an adiabatic down comer to study the instability regions. The experimental geometry is modeled using RELAP5. At high power (i.e., at 6 kW) flashing instability is observed when the inlet sub cooling is within the range of 7° C to 12° C. It is also found that the presence of an inlet restriction does not help to suppress the flashing induced flow oscillation. A good comparison between the experimental and numerical results is observed and this loop can be used for validation exercises of commercial codes.     

Molecular composition of recycled organic wastes,as determined by solid-state 13C NMR and elemental analyses

Using solid state ¹³C NMR data and elemental composition in a molecular mixing model, we estimated the molecular components of the organic matter in 16 recycled organic (RO) wastes representative of the major materials generated in the Sydney basin area. Close correspondence was found between the measured NMR signal intensities and those predicted by the model for all RO wastes except for poultry manure char. Molecular nature of the organic matter differed widely between the RO wastes. As a proportion of organic C, carbohydrate C ranged from 0.07 to 0.63, protein C from <0.01 to 0.66, lignin C from <0.01 to 0.31, aliphatic C from 0.09 to 0.73, carbonyl C from 0.02 to 0.23, and char C from 0 to 0.45. This method is considered preferable to techniques involving imprecise extraction methods for RO wastes. Molecular composition data has great potential as a predictor of RO waste soil carbon and nutrient outcomes.     

Particulate and gaseous emissions during fluidized bed combustion of semi-dried sewage sludge: Effect of bed ash accumulation on NOx formation

Combustion of two semi-dried sewage sludges in a 110 mm has been characterized in terms of particulate and gaseous emissions. Sludges differed in that they had been conditioned – at the flocculation stage of wastewater treatment – either with Ca-based inorganics or with polyelectrolytes. Combustion was efficient for both sewage sludges under all the operating conditions tested. Significant differences have instead been observed between the two types of sewage sludges as regards particulate and macro-pollutant gaseous emissions (SO₂, NO_x). NO_x formation is significantly influenced by ash accumulation inside the bed only when sewage sludge conditioned with Ca-based inorganics is fired. The time-resolved profiles of NO_x concentration and the mass flow rate of the elutriated fines have been worked out to evaluate the fuel nitrogen yield to NO_x as a function of ash accumulated inside the bed divided by the air mass feed rate. Experimental results have been compared with data present in literature.     

Determination of gaseous polycyclic aromatic hydrocarbons by a simple direct method using thermal desorption–gas chromatography–mass spectrometry

In the last decade, the development of novel analytical methodologies enabled the identification of several environmental pollutants responsible for health problems associated with indoor exposure. Polycyclic aromatic hydrocarbons (PAHs) are among the potential hazardous chemicals present in ambient air. Due to their bioaccumulation potential and carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants. The main goal of this work was to implement a new and simple method for sampling and determination of PAHs in air by using a thermal desorption (TD) technique followed by gas chromatography coupled with mass spectrometry analysis. A detailed study was carried out to optimise the experimental method in each of its phases, including (active) sampling, TD and chromatographic analysis. The results demonstrate that this approach allowed the detection and quantification of the six more volatile PAHs, namely, naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, and anthracene. Acceptable precision and good linearity over the explored range were obtained. No carry-over was observed during experimental tests and the method provided a reproducible answer. The applicability of the novel methodology was tested in real environment, namely, on the roof of a building in an urban area, in a domestic kitchen and in a collective car garage. The method enabled the identification of two PAHs in the field samples, specifically, naphthalene (two rings) and phenanthrene (three rings). With regard to PAHs sample composition, the most abundant PAH found, in the three different locations, was naphthalene, accounting for about 84–100 % of the total PAH mass detected.     

Assessment of oxidative stress markers and concentrations of selected elements in the leaves of Cassia occidentalis growing wild on a coal fly ash basin

Assessment of oxidative stress levels and tissue concentrations of elements in plants growing wild on fly ash basins is critical for realistic hazard identification of fly ash disposal areas. Hitherto, levels of oxidative stress markers in plants growing wild on fly ash basins have not been adequately investigated. We report here concentrations of selected metal and metalloid elements and levels of oxidative stress markers in leaves of Cassia occidentalis growing wild on a fly ash basin (Badarpur Thermal Power Station site) and a reference site (Garhi Mandu Van site). Plants growing on the fly ash basin had significantly high foliar concentration of As, Ni, Pb and Se and low foliar concentration of Mn and Fe compared to the plants growing on the reference site. The plants inhabiting the fly ash basin showed signs of oxidative stress and had elevated levels of lipid peroxidation, electrolyte leakage from cells and low levels of chlorophyll a and total carotenoids compared to plants growing at the reference site. The levels of both protein thiols and nonprotein thiols were elevated in plants growing on the fly ash basin compared to plants growing on the reference site. However, no differences were observed in the levels of cysteine, reduced glutathione and oxidized glutathione in plants growing at both the sites. Our study suggests that: (1) fly ash triggers oxidative stress responses in plants growing wild on fly ash basin, and (2) elevated levels of protein thiols and nonprotein thiols may have a role in protecting the plants from environmental stress.     

Treatment of digestate from a co-digestion biogas plant by means of vacuum evaporation: Tests for process optimization and environmental sustainability

Vacuum evaporation consists in the boiling of a liquid substrate at negative pressure, at a temperature lower than typical boiling temperature at atmospheric conditions. Condensed vapor represents the so called condensate, while the remaining substrate represents the concentrate.This technology is derived from other sectors and is mainly dedicated to the recovery of chemicals from industrial by-products, while it has not been widely implemented yet in the field of agricultural digestate treatment. The present paper relates on experimental tests performed in pilot-scale vacuum evaporation plants (0.100 and 0.025 m³), treating filtered digestate (liquid fraction of digestate filtered by a screw-press separator). Digestate was produced by a 1 MW_e anaerobic digestion plant fed with swine manure, corn silage and other biomasses. Different system and process configurations were tested (single-stage and two-stage, with and without acidification) with the main objectives of assessing the technical feasibility and of optimizing process parameters for an eventual technology transfer to full scale systems.The inputs and outputs of the process were subject to characterization and mass and nutrients balances were determined.The vacuum evaporation process determined a relevant mass reduction of digestate.The single stage configuration determined the production of a concentrate, still in liquid phase, with a total solid (TS) mean concentration of 15.0%, representing, in terms of mass, 20.2% of the input; the remaining 79.8% was represented by condensate. The introduction of the second stage allowed to obtain a solid concentrate, characterized by a content of TS of 59.0% and representing 5.6% of initial mass.Nitrogen balance was influenced by digestate pH: in order to limit the stripping of ammonia and its transfer to condensate it was necessary to reduce the pH. At pH 5, 97.5% of total nitrogen remained in the concentrate. This product was characterized by very high concentrations of total Kjeldhal nitrogen (TKN), 55,000 mg/kg as average.Condensate, instead, represented 94.4% of input mass, containing 2.5% of TKN. This fraction could be discharged into surface water, after purification to meet the criteria imposed by Italian regulation. Most likely, condensate could be used as dilution water for digestion input, for cleaning floor and surfaces of animal housings or for crop irrigation.The research showed the great effectiveness of the vacuum evaporation process, especially in the two stage configuration with acidification. In fact, the concentration of nutrients in a small volume determines easier transportation and reduction of related management costs. In full scale plants energy consumption is estimated to be 5–8 kWh_e/m³ of digestate and 350 kWh_t/m³ of evaporated water.     

Non-target effect of organic insecticides: effect of two plant extracts on soil microbial biomass and enzymatic activities in soil

Efficacious botanical derivatives can provide an alternative to synthetic pesticides for organic farming systems. However, there is lack of information regarding the side effects of organic pesticides on key soil ecological processes. In this study, we investigated the effects of aqueous extracts from Urginea maritima and Euphorbia myrsinites exhibiting translaminar and systemic activity against pests on microbial biomass and enzymatic activities in soil. Two grams of plant material was extracted with 100 ml of water and then diluted 1:100, 2:100, and 4:100 with distilled water. Diluted plant extracts were applied around hypocotyl of tomato by soil drench. The effect of both plant extracts on microbial biomass C, amount of total N and organic C, and enzymatic activity in soil was significant. After the last application, the highest microbial biomass C was determined in the lowest U. maritima concentration (U 1:100). Soils treated with the highest concentration of U. maritima (U 4:100) had always lower SMBC content than control soil. All concentrations of E. myrsinites decreased microbial biomass C by 18% to 27% compared to the control. Total nitrogen and organic carbon decreased in soils without (control) and with treated U. maritima extract from first application to last application. Phosphatase, urease, and β-glucosidase activities were monitored in plant extract-treated soils. Except U. maritima 1:100 treatments of second and fourth applications, the other treatments of plant extracts negatively affected enzymatic activity in soil. U. maritima and E. myrsinites plant extracts exhibited different effects on soil microbial biomass and activity, probably because of their different chemical contents.     

Regional extinction of a conspicuous dorid nudibranch (Mollusca: Gastropoda) in California

Felimare californiensis (=Hypselodoris californiensis) was once common throughout the Southern California Bight (SCB) and California Channel Islands. This well-known shallow-water nudibranch, which specializes on dysideid sponges, has persisted for decades in Mexico, but in California disappeared from its entire range by 1984. Since reappearing in 2003, it has been found only at Santa Catalina Island, plus sightings of single individuals in 2011 at Santa Cruz Island and San Diego. The decline of F. californiensis in California was documented using published historical records, museum collections, unpublished field accounts, and images posted online. The loss of this emblematic species is unique among Californian nudibranchs, including (1) its congener Felimare porterae (=Mexichromis porterae), with which it appears to overlap in diet, and (2) opisthobranch species with similar historical geographic ranges and mode of development. The decline in F. californiensis is not predicted by warming trends and climate variation over the past 40 years, including the strong El Niño events of 1983 and 1998. Coastal pollution from the large human population in southern California may have impacted Dysidea amblia, the primary reported prey of F. californiensis. Historical overcollecting of the nudibranch and habitat loss through the development of major ports likely also contributed to its decline. Sightings since 2003 are consistent with a nascent recovery, as elements of water quality have improved in the SCB in recent decades.     

Developments to a landfill processes model following its application to two landfill modelling challenges

The landfill model LDAT simulates the transport and bio-chemical behaviour of the solid, liquid and gas phases of waste contained in a landfill. LDAT was applied to the LMC1 and LMC2 landfill modelling challenges held in 2009 and 2011. These were blind modelling challenges with the model acting in a predictive mode based on limited early time sections of full datasets. The LMC1 challenge dataset was from a 0.34 m deep 0.48 m diameter laboratory test cell, and the LMC2 dataset was from a 55 m × 80 m 8 m deep landfill test cell which formed part of the Dutch sustainable landfill research programme at Landgraaf in the Netherlands. The paper describes developments in LDAT arising directly from the experience of responding to the two challenges, and discusses the model input and output data obtained from a calibration using the full datasets.The developments include the modularisation of the model into a set of linked sub-models, the strategy for converting conventional waste characteristics into model input parameters, the identification of flexible degradation pathways to control the CO₂:CH₄ ratio, and the application of a chemical equilibrium model that includes a stage in which the solid waste components dissolve into the leachate.