Natural and effective control of air pollution through plants- studies on a tree species: Holoptelea integrifolia L.

Gaseous and industrial air pollution is a serious problem throughout the world. It affects human health and plants also face negative impact on their biochemical processes, ultimately exhibited in terms of reduction in various growth parameters. The effect of air pollution is being felt even in remote areas, because pollutants can be transported over long distances. It is well known that plants absorbs gaseous/particulate pollutants and help in controlling air pollution. In order to test Holoptelea integrifolia L. as an effective and natural means for controlling air pollution present studies were undertaken. It was observed that the tree species tolerate well various pollutants present in the air, so can be used as an efficient method for minimizing of concentration pollutants to a safer level into the environment.     

A hybrid process for manufacturing surgical-grade knife blade cutting edges from bulk metallic glass

The demand for precision surgical knives is enormous. Currently, diamond knives have been the preferred choice among surgeons for use in precision surgeries, owing to the extreme hardness of diamond and the sharpness that can be achieved in single crystal diamond blades, but material and processing costs are high. Bulk metallic glass (BMG) has the potential to be an economically viable material of similar performance for use in precision surgical knives. To this end, a novel hybrid manufacturing process integrating thermally assisted micro-molding and micro-drawing has been developed for producing BMG surgical-grade knife blade cutting edges with edge radii <50 nm. A hybrid process testbed was designed and used to successfully run tests over a range of the key process variables. Through this testing the deformation of BMG under different strain rates and temperatures was studied in terms of the quality of edge formation. The hybrid process was shown to be capable of producing cutting edges of radius at or below 100 nm.     

Approach to histological detection of metallo-proteins

By use of a special type of application, molybdenum-99 is incorporated into xanthine oxidase molecules. The dissemination of molybdenum-99 labeled xanthine oxidase can be demonstrated by autoradiography.     

Simple and sensitive spectrophotometric determination of ziram, zineb and ferbam in commercial samples and foodstuffs using phenylfluorone

A procedure has been developed for the determination of ziram, zineb and ferbam dithiocarbamate pesticides by converting ziram and zineb into a zinc-phenylfluorone complex and ferbam into an iron phenylfluorone complex, which are then dissolved in water in the presence of cetylpyridinium bromide and pyridine as a surfactant. The method is sensitive, highly selective and can be used for the determination of ziram, zineb and ferbam in commercial samples and in foodstuffs.     

Development of a unique topology for a hard-turning micro-scale machine tool

A micro-scale machine tool (mMT) topology is developed for turning hardened steel bearing components. The topology utilizes the principle of leverage to increase accuracy and stiffness and incorporates decoupling to reduce unwanted motion of the tool. Performance specifications required that the static stiffness is at least 10 N/μm and dynamic stiffness is at least 30 N/μm in all directions. The kinematics for the topology are developed to enable control over the position and orientation of the tool tip. The effect of the topology on rake angle is determined and the topology is adjusted so as to minimize the rake angle variation during the cut. Cutting tests are performed to determine cutting parameters for achieving a low surface roughness and to estimate the accuracy of the machine. Tests show that the hard-turning mMT can achieve surface roughness below 25 nm Ra, diametrical accuracy of 1 μm and peak-to-valley roundness deviation (RONt) below 0.35 μm.     

A preliminary study of temporal differences in serum concentrations of perfluoroalkyl acids,among New York anglers,in the absence of known changes in manufacturing practices

Perfluorinated compounds have been manufactured in large quantities and used in myriad industrial processes and commercial applications. The aim of this preliminary study was to generate hypotheses with regard to differences in body burdens of perfluoroalkyl acids, among a sub-sample of participants from the New York State Angler Cohort Study, over a time interval during which no known substantial changes occurred in US manufacturing practices or commercial use. Paired serum specimens, collected from 15 subjects in 1993–1994 (time 1), and in 1995–1997 (time 2), with a minimum interval of 2.5 years, were assayed for PFDA, PFHpA, PFHxS, PFNA, PFOA, PFOS, PFOSA and PFUnDA using HPLC with ES-MS/MS. By subject, differences in concentrations between time 1 and time 2 were estimated, employing paired t-tests, correlations, and multivariable linear regression to accommodate heterogeneity in duration between specimens, and in time 1 concentrations. A statistically significant (P < 0.05) adjusted mean decrease of 0.16 ng mL^?1 (18.8%) between time 1 and 2 was detected for PFNA, and an adjusted mean increase of 0.54 ng mL^?1 (56.8%) was detected for PFOA. The results of this study may be indicative of short-term changes in human body burdens of PFNA and PFOA in association with local exposure sources.     

Regeneration of granular activated carbon loaded with explosives

Granular activated carbon (GAC) loaded with trinitrotoluene (TNT) and nitrobenzene (NB) were subjected to different atmospheres, such as nitrogen, oxygen, air, steam and an air-steam mixture, at varying temperatures and for different time intervals for regeneration. The air-steam mixture proved to be the best regenerating media for the explosive-loaded GACs. The regeneration of the activated carbon was found to be above 85% for TNT and above 90% for NB loaded carbons.     

Contamination of bovine milk with DDT and HCH residues in relation to their usage in malaria control programme

The contribution of spraying DDT and HCH for malaria control towards the contamination of bovine milk was investigated by analysing milk samples collected from preselected localities sprayed with either DDT or HCH in the Punjab. A direct correlation was found between the amounts of residues of these insecticides in milk and their typical usage pattern for the mosquito control programme. It is considered that these results may have significant bearing on the regulatory control of DDT and HCH residues in milk.     

Efficient control of air pollution through plants, a cost-effective alternative: studies on Dalbergia sissoo Roxb

Plants can be used as both passive biomonitors and biomitigators in urban and industrial environments to indicate the environmental quality and to ameliorate pollution level in a locality. Many studies reveal that plants are negatively affected by the ambient levels of air pollutants. The present study was conducted to evaluate the impact of air pollution on comparative basis with reference to changes in photosynthetic pigments, plant height, leaves, as well as, biochemical parameters of plants of different sites around Udaipur city receiving varying levels of pollution load. The investigated tree species Dalbergia sissoo Roxb. (Family: Fabaceae) exhibited a reduction in various physiological and biochemical growth parameters that correspond with air pollution levels at different sites. The tree species growing in polluted and control areas were compared with respect to foliar dust load, leaf area, and chlorophyll and total carbohydrate and total protein concentration in the leaves. Our studies suggest that D. sissoo Roxb. can successfully be grown in an area for monitoring air pollution, where it is mild and droughts are common. It will prove as an ideal tree species to control pollution effectively beside acting as a shade tree and being a source of food for birds and animals. By plantation of D. sissoo Roxb., mitigative measure at the polluted sites to control generation of particulate matter and the air quality required can be ensured. Our results also confirm that industrial and vehicular air pollution level in Udaipur city is shifting beyond limits.