北运河中游沉积物对磷的吸附特性研究

研究了位于北京郊区的北运河中游9个断面的沉积物对磷的吸附行为,分析了沉积物组成及其理化性质与磷吸附特征的关系.实验结果表明,不同断面沉积物对磷的最大吸附量在0.11 ～9.45 mg/g之间,而各断面沉积物的临界平衡磷浓度(EPC0)范围在0.33～ 1.85 mg/L之间,统计分析显示EPC0与河水中的总磷和可溶性无机磷呈显著负相关,但与沉积物中的金属和有机质含量相关性较差;根据临界平衡磷浓度定义的推断,新华大街桥、玉带桥、运河大街桥、六环路桥、宋梁路桥、湿地和甘棠橡胶坝7个断面的沉积物表现为磷的“汇”,而丰子沟和减运沟2个点表现为磷的“源”,并且各点沉积物释放和吸附磷的趋势较大.     

论岩浆的逆向演化及其成矿作用

长江中下游的岩浆岩在某些地区表现为由酸性→中性→基性的演化顺序,我们称之为岩浆的逆向演化.本文讨论了岩浆逆向演化的地质、地球化学背景及其产生机制,同时也论证了岩浆逆向演化与内生成矿作用的关系.     

Measurement of air exchange rates in different indoor environments using continuous CO2 sensors

A new air exchange rate (AER) monitoring method using continuous CO₂ sensors was developed and validated through both laboratory experiments and field studies. Controlled laboratory simulation tests were conducted in a 1-m³ environmental chamber at different AERs (0.1-10.0 hr^-1). AERs were determined using the decay method based on box model assumptions. Field tests were conducted in classrooms, dormitories, meeting rooms and apartments during 2-5 weekdays using CO₂ sensors coupled with data loggers. Indoor temperature, relative humidity (RH), and CO₂ concentrations were continuously monitored while outdoor parameters combined with on-site climate conditions were recorded. Statistical results indicated that good laboratory performance was achieved: duplicate precision was within 10%, and the measured AERs were 90%-120% of the real AERs. Average AERs were 1.22, 1.37, 1.10, 1.91 and 0.73 hr^-1 in dormitories, air-conditioned classrooms, classrooms with an air circulation cooling system, reading rooms, and meeting rooms, respectively. In an elderly particulate matter exposure study, all the homes had AER values ranging from 0.29 to 3.46 hr??1 in fall, and 0.12 to 1.39 hr^-1 in winter with a median AER of 1.15.     

防辐射有机玻璃板材的抗辐射性能

系统研究了含铅有机玻璃、含钡有机玻璃、含硼有机玻璃和普通有机玻璃的ｘ、γ射线和中子射线防护性能及其耐６０Ｃγ射线辐照稳定性。结果表明，含铅有机玻璃板材具有良好的ｘ射线、反应堆热柱γ射线屏蔽性能；合硼有机玻璃板材具有良好的热中子屏蔽性能；含钡有机玻璃板材的褪化裂变谱中子辐射屏蔽性能良好；含钡有机玻璃和普通有机玻璃可耐１０５～１０６Ｇｙ的６０Ｃｏｙ射线辐照；含铅有机玻璃板材耐６０Ｃｏｙ射线照射能力小于１０５Ｇｙ。     

水污染源自动监控系统运行存在的问题及对策

为解决水环境污染问题,提升水污染源自动监控系统的运行效率,介绍了水污染源自动监控系统的基本情况,指出了其中存在的问题,提出了提升水污染源监控系统运行效果的对策:社会各方形成合力,共同展开源头保障工作,建设水污染源监控系统,规范化推广,提高运营效率,采取统一的业务专业化培训方式,严格规范相关设备的使用,定期进行业务考评,...     

白龙港污水处理厂污泥厌氧消化启动试验研究

分析了上海白龙港污水处理厂的化学污泥和剩余污泥的性质,在此基础上分别研究了以化学污泥、剩余污泥、化学污泥和剩余污泥组成的混合污泥为接种污泥,对比研究了三种污泥的厌氧消化启动,结果表明,从产气量和有机物降解率分析,三种污泥作为厌氧消化的种泥都是可行的,启动优先顺序为化学污泥>混合污泥>剩余污泥,但考虑到化学污泥进行厌氧消化后出泥脱水性能差,建议采用化学污泥和剩余污泥的混合污泥进行启动。     

Preliminary report on methane emissions from the Three Gorges Reservoir in the summer drainage period

Considerable variations may exist in CH4 emissions from the Three Gorges Reservoir.     

常压塔塔顶腐蚀关键参量相关性分析与预测

预测常压塔顶回流罐切水的关键离子浓度可以为常压塔顶系统工艺防腐提供技术指导。收集了某炼厂2014-2016年常压装置的生产实时工艺参数、原料及产品采样数据、水质分析化验参数,采用线性插值方法对不同时间尺度的数据进行补全。通过线性相关性分析获得了影响常压塔顶回流罐切水总铁离子浓度、pH的主要因素,并基于深度学习、支持向量机回归、粒子群优化方法建立了腐蚀关键参量预测模型。结果表明,pH值和总铁离子浓度的相关因素大部分重叠,与原料性质及产品馏出温度较强相关;建立的回归模型预测精度高,在训练集和预测集上,总铁离子浓度预测值与测量值最大偏差分别为4. 4%和9. 8%,pH值预测值与测量值最大偏差分别为0. 9%和1. 1%。     

唐山市南湖湿地水体富营养化治理研究

以芦苇作为人工湿地植物,土壤为基质建立人工湿地,采用人工湿地控制试验的方法深入研究了芦苇和湿地基质对唐山人工湿地南湖污水中氮磷的净化能力以及氮、磷在芦苇根、茎、叶的时空分布和动态变化,实验结果表明：芦苇湿地对污水中的氮、磷的净化效果十分明显,在一个月内对污水中TN的平均去除率可达到61.99%,TP平均的去除率可达51.97%,其中基质吸附和植物吸收作用是湿地脱氮除磷的重要形式。     

Management of process performance at low water temperatures in respect of filamentous organisms

The management of sludge-settling properties in Nordic conditions is of importance during the low temperature (spring) season because of the peak settler load. A survey was made in 10 Finnish waste water treatment plants(WWTP‘ s) and the total extended filament length and DSVI in haft of the plants exceeded the limits, which indicates sludge bulking( 15 km/g SS and 150 ml/g respectively). The dominant organism was Microthrix parvicella, the abundance of which was 59.22% of total extended filament length on average.Chemicals were tested to control the filaments, and it was found that special attention has to be paid to maintaining the nitrification at low temperature. A dosage of(H2O2-besed) oxidants controlled the growth of Microthrix parvicella effectively and rapidly, whereas with the use of aluminium hydroxidechloride a 2 to 5-week period was needed to decrease the filament length.