Environmental mutagenicity and toxicity caused by sodium metabisulfite in sea shrimp harvesting in Piauí, Brazil

Sodium metabisulfite is used in marine shrimp harvesting to prevent the occurrence of black spots. Shrimps are soaked in a sodium metabisulfite solution in ice, which is disposed of in sewages that run into marine canals, creating an environmental hazard. This study evaluates the toxicity and mutagenicity caused by sodium metabisulfite in sea waters and sediments collected in a shrimp farm in Cajueiro da Praia (Luis Correia), state of Piauí, Brazil, using the Allium cepa assay. Water and sediment samples were collected in the dry and in the rainy seasons, in three sites: upstream the shrimp farm (Site 1), at the point sodium metabisulfite is discharged (Site 2), and 100 m downstream the farm (Site 3). Three sample dilutions were used (50%, 25% and 10%) for all samples. A negative control (well water) and a positive control (copper sulfate 0.0006 mg mL⁻¹) were used in each experiment. At the end of the 72-h exposure period, onion roots were measured and removed. Mutagenicity analysis included the determination of mitotic index, chromosomal aberrations and the detection of micronuclei; analysis of root size and mitotic index were used as an index of toxicity. The A. cepa assay revealed that the water and sediments samples collected in the Piauí coast contaminated with sodium metabisulfite induce toxicity. The results demonstrate that the assay may be used as a regular tool in the analysis of water parameters in shrimp farms in the coast of Piauí state, and in strategies to preserve the region’s marine ecosystem.     

Environmental risk assessment in five rivers of Parana River basin,Southern Brazil,through biomarkers in Astyanax spp.

Environmental Science and Pollution Research - In the current study, water quality of five river sites in Parana River basin (Brazil), utilized for public water supply, was assessed through a set...     

Lithium bioaccumulation in Lentinus crinitus mycelia grown in media with different lithium sources and pH values

Environmental Science and Pollution Research - Lentinus crinitus bioaccumulates lithium in mycelia, but bioaccumulation may be affected by pH of the culture medium. Lithium is used in clinical...     

Bridging information domains to improve ecological understanding of biological invasions in a marine ecosystem

We devised a practical method for integrating information on 2 marine invasive species using 3 different approaches: standardized ecological monitoring, online-reporting databases, and surveys of anglers and crabbers. Focusing on 2 recently introduced species with different characteristics, the Asian shore crab (Hemigrapsus sanguineus) and Chinese mitten crab (Eriocheir sinensis), in the Hudson-Raritan watershed of New York and New Jersey, we used sensitivity analyses to explore the relative contribution of each information source to knowledge of species abundance and distribution. All 3 information sources contributed something unique to understanding abundance and distribution of the introduced crabs. Online and survey data on Asian shore crabs significantly affected predictions of abundance, whereas monitoring data did not. When survey data were omitted, abundance estimates were unchanged over time, but when they were included, the model predicted an increased abundance in 2012. All 3 data sets for the Asian shore crab significantly affected estimates of species coverage; surveys had the biggest influence, increasing range size by 4097.25 km². For the catadromous Chinese mitten crab, ecological monitoring data collected in freshwater shortly after the original sighting significantly shaped model estimates for abundance and documented the establishment phase of the mitten crab in an area outside the spatial scope of the surveyed resource users. However, the survey data significantly enlarged mitten crab range-size estimates by 6498.01 km². By demonstrating that data integration produced an image of the invasion process that would not have emerged had we used any 1 method individually, model results provide evidence for the advantages of an interdisciplinary approach.     

The use of a natural coagulant (Opuntia ficus-indica) in the removal for organic materials of textile effluents

The goal of this study was to investigate the activity of the coagulant extracted from the cactus Opuntia ficus-indica (OFI) in the process of coagulation/flocculation of textile effluents. Preliminary tests of a kaolinite suspension achieved maximum turbidity removal of 95 % using an NaCl extraction solution. Optimization assays were conducted with actual effluents using the response surface methodology (RSM) based on the Box–Behnken experimental design. The responses of the variables FeCl₃, dosage, cactus dosage, and pH in the removal of COD and turbidity from both effluents were investigated. The optimum conditions determined for jeans washing laundry effluent were the following: FeCl₃ 160 mg L^?1, cactus dosage 2.60 mg L^?1, and pH 5.0. For the fabric dyeing effluent, the optimum conditions were the following: FeCl₃ 640 mg L^?1, cactus dosage 160 mg L^?1, and pH 6.0. Investigation of the effects of the storage time and temperature of the cactus O. ficus-indica showed that coagulation efficiency was not significantly affected for storage at room temperature for up to 4 days.     

Enhancement of PAH biomineralization rates by cyclodextrins under Fe(III)-reducing conditions

Amendment of a soil slurry with low concentrations of a cyclodextrin, hydroxypropyl-beta-cyclodextrin (HPCD), (0.05-0.5 g l(-1)) increased the phenanthrene mineralization rate of a microbial consortium by 25% under Fe(III)-reducing conditions. Although a higher concentration (5.0 g l(-1)) resulted in a faster initial rate of mineralization, mineralization ceased after 25 days with maximum mineralization 17% lower than the control (no HPCD). At lower HPCD concentrations, mineralization was still taking place at day 76. Although pH should affect Fe(III) solubility, mineralization rates at pH 6.0 and 8.0 were comparable. Decreasing the temperature reduced the extent and rate of mineralization, but mineralization rates at 10 degrees C were still 60% of that obtained at 30 degrees C.     

Effects of activated sludge and UV disinfection processes on the bacterial community and antibiotic resistance profile in a municipal wastewater treatment plant

Environmental Science and Pollution Research - Wastewater tertiary treatment has been pointed out as an effective alternative for reducing the concentration of antibiotic resistant bacteria and...     

Consumption of low-density polyethylene,polypropylene, and polystyrene materials by larvae of the greater wax moth,Galleria mellonella L. (Lepidoptera,Pyralidae), impacts on their ontogeny

Low-density polyethylene (LDPE), biaxially oriented polypropylene (BOPP), and expanded polystyrene (EXPS) are the most common plastics found in every home of the world, but only ~ 10% enter the recycling chains. Consequently, the study of plastic biodegradation by microorganisms and insects, such as the wax moths, has gained special interest. Galleria mellonella (L.) has been shown to consume single-layered polyethylene and polystyrene, though biological impacts of this consumption have been rarely reported. We evaluated the consumption of different plastics by G. mellonella larvae (L7, mean size: 25–30 mm) and its effect on larval duration, survival, and development. For this, we offered the larvae five diets: single-layered LDPE, EXPS, BOPP, triple-layered polyethylene (SB, for silo-bags), and a control with beeswax. We recorded the state and weight of the materials and the state of larvae until they reached the adult stage. Larvae consumed more PE (both LDPE and SB) and EXPS than BOPP; still, they were able to emerge as adults in all treatments. Larvae that consumed plastics turned into pupal stage faster than those that consumed beeswax, regardless of the type and amount of plastic consumed. This is the first report of wild G. mellonella larvae in Argentina consuming biaxially polypropylene and silo-bags.

     

Organochlorine concentrations in franciscana dolphins, Pontoporia blainvillei, from Brazilian waters

Blubber samples were collected from ten franciscana dolphins either incidentally captured in fishing operations or stranded on São Paulo (SP) and Paraná (PR) states littoral, Southeastern and Southern Brazilian coast, respectively. Determination of PCB, DDT and HCB concentrations were performed by capillary gas chromatograph coupled to electron capture detector (ECD). ΣDDT, ΣPCB and HCB concentrations ranged from 264 ng g⁻¹ to 5811 ng g⁻¹ lipid, from 909 ng g⁻¹ to 5849 ng g⁻¹ lipid and from 10 ng g⁻¹ to 61 ng g⁻¹ lipid, respectively. Regarding DDTs, the distribution of the mean percentages decreased in the following order: p,p′-DDE > p,p′-DDD > p,p′-DDT. The ΣDDT/ΣPCB ratio varied between 0.27 and 0.42 in Northern and Central SP coast, while in Southern SP and PR coast the values were 1.6 and 1.9, respectively. Dissimilarities in ΣDDT/ΣPCB ratios point to different sources of organochlorine compounds to franciscana dolphins in the study area. Considering the endocrine disruptive action of organochlorine compounds, the concentrations found in franciscana dolphins from Brazilian waters may represent an additional obstacle to the conservation of this endangered cetacean species.     

Preparation and characterization of activated carbon from a new raw lignocellulosic material: Flamboyant (Delonix regia) pods

Activated carbons were prepared from flamboyant pods by NaOH activation at three different NaOH:char ratios: 1:1 (AC-1), 2:1 (AC-2), and 3:1 (AC-3). The properties of these carbons, including BET surface area, pore volume, pore size distribution, and pore diameter, were characterized from N₂ adsorption isotherms. The activated carbons obtained were essentially microporous and had BET surface area ranging from 303 to 2463 m² g⁻¹.¹³C (CP/MAS and MAS) solid-state NMR shows that the lignocellulosic structures were completely transformed into a polycyclic material after activation process, thermogravimetry shows a high thermal resistance, Boehm titration and Fourier-transform infrared spectroscopy allowed characterizing the presence of functional groups on the surface of activated carbons. Scanning electron microscopy images showed a high pore development. The experimental results indicated the potential use of flamboyant pods as a precursor material in the preparation of activated carbon.