Refinement of the density-modified displacement method for efficient treatment of tetrachloroethene source zones

A novel method to remediate dense nonaqueous phase liquid (DNAPL) source zones that incorporates in situ density conversion of DNAPL via alcohol partitioning followed by displacement with a low interfacial tension (IFT) surfactant flood has been developed. Previous studies demonstrated the ability of the density-modified displacement (DMD) method to recover chlorobenzene (CB) and trichloroethene (TCE) from heterogeneous porous media without downward migration of the dissolved plume or free product. However, the extent of alcohol (n-butanol) partitioning required for in situ density conversion of high-density NAPLs, such as tetrachloroethene (PCE), could limit the utility of the DMD method. Hence, the objective of this study was to compare the efficacy of two n-butanol delivery approaches: an aqueous solution of 6% (wt) n-butanol and a surfactant-stabilized macroemulsion containing 15% (vol) n-butanol in water, to achieve density reduction of PCE-NAPL in two-dimensional (2-D) aquifer cells. Results of liquid-liquid equilibrium studies indicated that density conversion of PCE relative to water occurred at an n-butanol mole fraction of 0.56, equivalent to approximately 5 ml n-butanol per 1 ml of PCE when in equilibrium with an aqueous solution. In 2-D aquifer cell studies, density conversion of PCE was realized using both n-butanol preflood solutions, with effluent NAPL samples exhibiting density reductions ranging from 0.51 to 0.70 g/ml. Although the overall PCE mass recoveries were similar (91% and 93%) regardless of the n-butanol delivery method, the surfactant-stabilized macroemulsion preflood removed approximately 50% of the PCE mass. In addition, only 1.2 pore volumes of the macroemulsion solution were required to achieve in situ density conversion of PCE, compared to 6.4 pore volumes of the 6% (wt) n-butanol solution. These findings demonstrate that use of the DMD method with a surfactant-stabilized macroemulsion containing n-butanol holds promise as an effective source zone remediation technology, allowing for efficient recovery of PCE-DNAPL while mitigating downward migration of the dissolved plume and free product.     

A comparison of the compositional differences between humic fractions isolated by the IHSS and exhaustive extraction procedures

Humic substances (HSs), consisting, on the basis of solubilities in aqueous acid and basic media, of humic acids (HAs), fulvic acids (FAs), and humin (Hu), are the major components of soil organic matter (SOM). Most studies of soil/natural organic matter (SOM/NOM) have been carried out on extracts of soils in dilute sodium hydroxide solutions, the solvent used to extract the Standards of the International Humic Substances Society (IHSS). However, Hu, the major component in the classical definition of HSs, is insoluble in aqueous base and is not isolated by the traditional IHSS method. Recently, a sequential exhaustive extraction (SEE) process has been shown to be capable of isolating and separating the major components of the classically defined HSs from the soils of the temperate and tropical regions. The SEE system was used in the present study to isolate the HA/FA and Hu fractions from a subtropical volcanic Taiwanese soil. Chemical and compositional properties of these extracts were then compared with similarly obtained isolates from soils from the different climatic regions. Increases in the aliphatic relative to aromatic carbon contents were observed for both the HA and FA fractions when the pH values of the extraction media were increased. HAs and FAs isolated using the SEE method have spectroscopic profiles similar to those from the IHSS isolate; however, the cumulative extraction efficiency (%) of the SEE method (65 %) for the volcanic soil was much higher than for the traditional IHSS method (33 %). When the residual volcanic soil, following extractions once, three, and eight times with 0.1 M NaOH were then extracted with dimethyl sulphoxide (DMSO) plus concentrated sulphuric acid (the final solvent in the SEE sequence) it was seen that the content of crystalline polymethylene hydrocarbon (33 ppm ¹³C-NMR resonance in the Hu (or DMSO/acid)) extract increased relative to the amorphous methylene (30 ppm). That highlights the difficulty in dissolving the more highly ordered hydrocarbon structures that would be expected to have closer associations with the mineral colloids. Although the SEE procedure isolated all of the HAs and FAs from the Yangmingshan soil, extractability of the Hu from the volcanic soil in the DMSO/acid solvent was low (21 %), and contrasted with the much higher yields from temperate and tropical regions. The decreased Hu extraction may arise from its associations with the extensive iron and aluminium hydroxide mineral colloids in the soil. The Hu from this sub-tropical soil was different from the Hus isolated from other soil types, indicating the need to isolate and characterise these recalcitrant organic material in order to understand the organic carbon components in soils in greater detail. Such results would indicate that more attention should be given to mineral colloids in soils, and to the organo/mineral associations that will have an important role in the stabilities of OM in the soil environment.     

The Identification of Xenobiotics in the New UK Context of Drinking Water Safety Planning and Related Environmental Legislation

Recent European environmental legislation (the Water Framework Directive, the Environmental Liability Directive, and the REACH Regulation) should provide better protection of terrestrial water bodies but their focus is on the more conspicuous pollutants, as opposed to the large number of xenobiotic micro-pollutants that are increasingly being detected in the urban water cycle. The development of Drinking Water Safety Plans (DWSPs), as promoted by the World Health Organization, utilises a proactive risk assessment—risk management approach that necessarily should include micro-pollutants, although currently in the UK micro-pollutants have largely been ignored. The generic assessment of the risks posed by micro-pollutants is proposed and will require a consensus on analytical screening methods, sampling points and frequencies, and a method for prioritising concern, and would enable DWSPs to take fuller account of the risks posed.     

Experts under the microscope: the Wivenhoe Dam case

Prosecution of experts in the wake of disasters has emerged as common in the context of increasing social intolerance of risk. This paper examines expert blame using as a case study the decisions of engineers who operated Wivenhoe Dam during the Queensland floods in January 2011 and the criticisms of those decisions by the subsequent Commission of Inquiry. Our analysis draws on the literature on organisational safety, organisational learning and expertise to examine the relevance of the criteria against which the engineers were judged, the relevant competence of those who made this assessment and the broader implications of such exercises. Our analysis shows that lay judgements of expert practice can be misleading, as evidenced by the Commission of Inquiry’s misguided focus on procedural adherence. We argue that such inquiries—where the focus is on assigning blame—detract from opportunities to learn from incidents and can negatively impact on professional practices. If the aim is to make future disasters less likely, then inquiries that take this approach may be failing in this endeavour, or at least not maximising their contribution.     

LOW FLOW SPATIAL CHARACTERISTICS IN FORESTED HEADWATER CHANNELS OF SOUTHWEST WASHINGTON1

ABSTRACT: Patterns of dry season surface flow in forested headwater channels of southwest Washington were observed during August to September 2001 and July to October 2002. In 2001, 17 channels were sampled once, and the uppermost points of continuous flow (CF) and surface water (SW) were located. In 2002, sampling was replicated three to five times at each of 21 channels. Annual and seasonal data suggested that the location of SW varied less than CF. In most channels, SW remained at or near the channel head year around. The pattern of surface flow between CF and the channel head was used to test alternative hypotheses describing dry season recession patterns: (A) surface flow consistently retreats in a downstream direction, and (B) flow comes from fixed sources along the channel, thus surface flow retreats up‐channel towards these sources. The dominant surface flow spatial pattern in streams less than 30 percent slope was increased intermittency without a clear pattern of retreat, and thus inconsistent with either hypothesis. High gradient channels (< 30 percent slope) exhibited a combination of increased intermittency, and extensive upward retreats of surface water consistent with Hypothesis B. Differences between 2001 and 2002 suggest late summer flows in small headwater basins were controlled by spring precipitation, rather than the typically greater winter precipitation.     

Chemically mediated avoidance of a predatory odonate (Anaxjunius) by American toad (Bufoamericanus) and wood frog (Ranasylvatica) tadpoles

Predators can have significant nonlethal effects on prey by modifying prey behaviour through chemically mediated interactions. We examined behavioural responses of wood frog (Ranasylvatica) and American toad (Bufoamericanus) tadpoles to both direct and indirect chemical signals associated with a predatory odonate (Anaxjunius). In laboratory trials, tadpoles of both species responded strongly to water conditioned with Anax nymphs by decreasing foraging rates, becoming immobile, and moving away from the stimulus. The responses to water conditioned with starved Anax versus Anax that fed on conspecific tadpoles did not differ significantly; these results suggest that tadpoles rely primarily on direct signals to detect odonates. Rana did not respond to water conditioned with conspecific tissue extracts, while Bufo responded with behaviours that were indistinguishable from those of tadpoles exposed to Anax chemicals. In a field experiment, the responses of R. sylvatica tadpoles to Anax chemicals were similar to those of tadpoles observed in the laboratory. Collectively, our data indicate that tadpoles of both species use chemical cues to assess predation risk from other community members. Tadpoles can selectively distinguish members who pose a threat, and only evacuate food patches or reduce foraging rates when in danger. These behaviours appear to be adaptive and are consistent with the predictions of optimality theory. Received: 1 August 1997 / Accepted after revision: 22 November 1997     

Factors Leading to Different Viability Predictions for a Grizzly Bear Data Set

Population viability analysis programs are being used increasingly in research and management applications, but there has not been a systematic study of the congruence of different program predictions based on a single data set. We performed such an analysis using four population viability analysis computer programs: GAPPS, INMAT, RAMAS/AGE, and VORTEX. The standardized demographic rates used in all programs were generalized from hypothetical increasing and decreasing grizzly bear ( Ursus arctos horribilis ) populations. Idiosyncracies of input format for each program led to minor differences in intrinsic growth rates that translated into striking differences in estimates of extinction rates and expected population size. In contrast, the addition of demographic stochasticity, environmental stochasticity, and inbreeding costs caused only a small divergence in viability predictions. But, the addition of density dependence caused large deviations between the programs despite our best attempts to use the same density-dependent functions. Population viability programs differ in how density dependence is incorporated, and the necessary functions are difficult to parameterize accurately. Thus, we recommend that unless data clearly suggest a particular density-dependent model, predictions based on population viability analysis should include at least one scenario without density dependence. Further, we describe output metrics that may differ between programs; development of future software could benefit from standardized input and output formats across different programs.