Degradation of ethinyl estradiol by nitrifying activated sludge

Degradation of ethinyl estradiol (EE2) by nitrifying activated sludge was studied with micro-organisms grown in a reactor with feedback of sludge fed with only a mineral salts medium containing ammonium as the sole energy source. Ammonium was oxidised by this sludge at a rate of 50 mg NH4+ g(-1) DW h(-1). This activated sludge was also capable of degrading EE2 at a maximum rate of 1 microg g(-1) DW h(-1). Using sludge with an insignificant nitrifying capacity of 1 mg NH4+ g(-1) DW h(-1), no degradation of EE2 was detected. Oxidation of EE2 by nitrifying sludge resulted in the formation of hydrophilic compounds, which were not further identified. Most probably degradation by nitrifying sludge results in a loss of estrogenic activity, as hydroxylated derivatives of EE2 are known to have a substantially lower pharmacological activity than EE2.     

Degradation of octylphenol and nonylphenol by ozone - part I: direct reaction

This aqueous reaction between ozone and two alkylphenols (APs), namely octylphenol (OP) and nonylphenol (NP), has been investigated. Both compounds are important endocrine disrupting chemicals, which arise from the biodegradation of alkylphenol ethoxylates and are often found at relatively high concentrations in wastewater effluents. In this paper the results of an experimental study are presented which provide values for the reaction rate constants between molecular ozone and undissociated OP and NP, and overall reaction rate constants for the degradation of the two APs at pH values in the range of 7-9. The kinetic rate constants for OP and NP degradation by molecular ozone were 4.33(+/-0.18) x 10(4) and 3.90(+/-0.10) x 10(4) M(-1) s(-1), and the reaction stoichiometry was similar in both cases and equal to approximately 1.3:1 ([O3]:[AP]). The overall second order reaction rate constants for the two APs increased significantly with increasing pH, which is believed to be mainly due to the increasing influence of indirect radical reaction with increasing pH; this aspect is considered in more detail in a companion paper. A preliminary investigation of the reaction mechanism suggests that an initial product of ozonation is hydroxyl-alkyl phenol.     

Contamination of wild-grown edible mushrooms by heavy metals in a former mercury-mining area

The aim of this study was to evaluate the contamination of six edible wild species of mushrooms (Boletus pulverulentus, Cantharellus cibarius, Lactarius quietus, Macrolepiota procera, Russula xerampelina and Suillus grevillei) by heavy metals (Hg, Cd, Pb, Zn, Cu, Ni, Cr, Co, Mn and Fe). Mushroom samples were collected from sites contaminated by emissions from mining and processing of polymetallic ores in operation during the period 1969–1993 in Rudňany, southeast Slovakia. The four study sites spanned up to a 5-km distance from the emission source. The collected mushroom samples were analyzed using Flame Atomic Absorption Spectrophotometry and/or Flame Atomic Absorption Spectrophotometry with graphite furnace. Mercury, Cd and, in some samples, also Pb present the highest risks in terms of contamination of the food chain following subsequent consumption. The content of two metals in the dry matter (dm) of the mushrooms exceeded the limits set by the European Union (EU; Cd: 0.5 mg/kg dm, Pb: 1.0 mg/kg dm). The highest mean contents of the eight metals recorded for S. grevillei were 52.2, 2.15, 107, 104, 2.27, 2.49, 81.6 and 434 mg/kg dm for Hg, Pb, Zn, Cu, Ni, Cr, Mn and Fe, respectively. The highest content of Cd was recorded in M. procera (3.05 mg/kg dm) and that of Co in L. quietus (0.90 mg/kg dm). The calculated weekly intake for Hg, Pb and Cd shows that regular consumption of mushrooms from the studied area poses risks to human health.     

Catalytic and electrocatalytic hydrogenolysis of brominated diphenyl ethers

Polybrominated diphenyl ethers (PBDEs) are ubiquitous environmental contaminants due to their use as additive flame-retardants. Conventional catalytic hydrogenolysis in methanol solution and electrocatalytic hydrogenolysis in aqueous methanol were examined as methods for debrominating mono- and di-bromodiphenyl ethers, as well as a commercial penta-PBDE mixture, in each case using palladium on alumina as the catalyst. Electrocatalytic hydrogenolysis employed a divided flow-through batch cell, with reticulated vitreous carbon cathodes and IrO2/Ti dimensionally stable anodes. Both methods gave efficient sequential debromination, with essentially complete removal of bromine from the PBDEs, but the electrocatalytic method was limited by the poor solubility of PBDEs in aqueous methanol.     

Bioassay for determining sensitivity to sulfosulfuron on seven plant species

This study presents a bioassay procedure, based on the root and shoot growth parameters, for the determination of the herbicide sulfosulfuron (1-(4,6 dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-ylsulfonil)urea) sensitivity on seven vegetal species. Plant response to sulfosulfuron was calculated with the equations fitted to the root growth data as a function of the logarithm of the herbicide concentration by non-linear regression and was used to calculate the doses for 10, 30 and 50% inhibition of root growth (EC10, EC30 and EC50). The results indicate that the phytotoxic effect of sulfosulfuron in all the species assayed followed the order: flax > maize > onion > vetch > lepidium sativum > tomato > barley. These species showed phytotoxicity at low levels of sulfosulfuron and flax appeared to be the most susceptible species to sulfosulfuron (0.001 mg/L).     

Air Pollution Control of an Electric Furnace Steelmaking Shop

The body of information presented in this paper is directed to design engineers, operating management and others who may be concerned with the prevention of atmospheric emissions from electric arc steelmaking furnaces. Inland Steel Co. has recently begun operating its first electric furnace shop. Air pollution control equipment for the shop was installed to meet or exceed the legal requirements of applicable air pollution ordinances and regulations. General shop production requirements were established at 100 tons of steel per hour (maximum) to meet sales forecasts and intermediate production facility requirements. Conventional swing roof furnace design was selected for the pair of furnaces in the shop.     

The fate of recombinant plasmids during composting of organic wastes

Composting was investigated as a means for safe disposal of organic waste containing bacteria that carry transgenes in recombinant plasmids. To generate model recombinant plasmids, a mobile IncQ plasmid, RSF1010, and a non-mobile plasmid, pGFP, were genetically modified to carry a DNA segment encoding both green fluorescent protein and kanamycin resistance and were designated as RSF1010-GFPK and pGFPK. Escherichia coli (E. coli) C600 harboring these plasmids were inoculated into chicken manure specimens that were placed in compost at 20 and 60 cm from the bottom of a 1.0-m high compost bin. Control specimens were held at ambient temperature. By day 10, compost temperatures at the lower and upper levels of the bin had reached 45.3 and 61.5°C, respectively, and at both levels the target E. coli had been inactivated and the plasmids had lost their capacity to be transformed or mobilized. Furthermore, based on real time Polymerase chain reaction (PCR), the transgene fragments along with the host chromosomal DNA fragment from specimens at the upper level had been degraded beyond the detection limit. However, at the lower level where temperatures remained below 48°C these fragment persisted to day 21. At ambient temperatures (0–8°C), the E. coli, plasmids and the transgene fragments persisted in manure specimens throughout the 21 day test period. The study showed the potential for composting as a safe procedure for disposal of bacteria carrying transgenes in recombinant plasmids.