污水低氧脱氮机制及其应用研究进展

阐述了污水低氧脱氮的基本原理,即抑制或去除亚硝酸盐氧化菌(NOB),同时保留氨氧化菌(AOB),并保持其活性;探讨了污水低氧脱氮实现途径;详细介绍了几种典型的污水低氧脱氮工艺(短程硝化(SHARON)工艺、厌氧氨氧化(ANAMMOX)工艺、好氧反氨化(DEMON)工艺、低氧自养硝化反硝化(OLAND)工艺、甲烷营养型硝化反硝化工艺和亚硝酸盐型完全自养脱氮(CANNON)工艺)的应用研究进展;最后对污水低氧脱氮处理工艺的工程运用进行了展望.     

液化石油气轿车实际道路污染物排放特征

利用PEMS对国2技术LPG出租轿车和汽油轿车的实际道路排放进行测试,基于测试数据对LPG轿车排放特征进行解析,并与汽油轿车的排放因子进行对比分析.结果显示:速度和行驶模式对LPG轿车污染物排放影响明显;LPG轿车CO 2、CO、HC和NOx污染物的实测排放因子分别为(169.5±22.2)、(2.18±2.38)、(...     

用于污水再生利用的生物活性炭床的有机物降解特性

以微生物增殖动力学的基本方程-莫诺方程为出发点,通过氮同位素分析比较了具有同源性微生物的生物陶粒滤床和生物活性炭床的有机物生物降解规律,建立了生物活性炭床的有机物生物降解动力学方程,提出在污水再生利用过程中生物活性炭床符合高基质有机物降解动力学模型,即有机物降解呈一级反应动力学方程。以此方程为基础,分析计算了生物活性炭床沿炭床深度的吸附性能,结果表明,在生物活性炭床中,随生物功能的减弱,生物活性炭床对有机物的吸附能力逐渐加强。     

Heavy metal and Pb isotopic compositions of aquatic organisms in the Pearl River Estuary, South China

The accumulation of trace metals in aquatic organisms may lead to serious health problems through the food chain. The present research project aims to study the accumulation and potential sources of trace metals in aquatic organisms of the Pearl River Estuary (PRE). Four groups of aquatic organisms, including fish, crab, shrimp, and shellfish, were collected in the PRE for trace metal and Pb isotopic analyses. The trace metal concentrations in the aquatic organism samples ranged from 0.01 to 2.10 mg/kg Cd, 0.02 to 4.33 mg/kg Co, 0.08 to 4.27 mg/kg Cr, 0.15 to 77.8 mg/kg Cu, 0.17 to 31.0 mg/kg Ni, 0.04 to 30.7 mg/kg Pb, and 8.78 to 86.3 mg/kg Zn (wet weight). High concentrations of Cd were found in crab, shrimp and shellfish samples, while high concentration of Pb was found in fish. In comparison with the baseline reference values in other parts of the world, fish in the PRE had the highest elevated trace metals. The results of Pb isotopic compositions indicated that the bioaccumulation of Pb in fish come from a wide variety of food sources and/or exposure pathways, particularly the anthropogenic inputs.     

二段生物接触氧化工艺在中水回用中的特性研究

以规模小区生活污水为水源,对采用聚丙烯网状填料和强化炉渣组合填料的二段生物接触氧化工艺（以下简称二段法）进行了试验研究,试验针对本工艺的各项技术指标、影响因素以及各相关参数进行了较系统的试验测试。结果表明,反应器在第一接触氧池HRT为20 min、气水比为6∶1和第二接触氧池HRT为25 min、气水比为5∶1条件下,接触氧化池达到最佳降碳条件;反应器在第一接触沉池上升流速5.5 m/h和第二接触沉池上升流速4.5 m/h条件下,接触沉淀池达到最佳处理条件。     

重铬酸钾─三氯化钛法测定水中溶解氧

介绍了三氯化钛（ＴｉＣｌ３）与氧反应，以钨酸钠（Ｎａ２ＷＯ４）作指示剂，用重铬酸钾溶液滴定过剩三氯化钛来测定水中溶解氧的方法。本法与碘量法比较，结果表明方法准确、快速，适合于水样中溶解氧的测定     

1994年江淮伏旱及其影响研究

利用江谁地区18个站点1951～1995年6～8月降水量资料,用Z指数建立了历年夏季旱涝序列,着重对1994年江淮伏旱及其对农业、水资源的影响进行了分析评述,获得了一些有意义的结论。     

水稻生产气象灾害危险性分析：—以湖南省常德市水稻生产为例

本文通过对研究区水稻气象灾害规律的研究和危险性评价,计算了不同等级的水稻综合风险率,为保险部门制定水稻保险费率提供了科学依据.     

地震科技人员开发能力的灰色关联分析

应用灰色系统理论，根据江苏省地震工程研究院的地震科技开发资料，分别以项目负责人的年龄、学历、职称、职务、学科作为比较数列，对年度内完成的实际合同额进行了多因素灰色关联分析，排出了关联序。研究结果客观地揭示了开发能力与人的各种因素——年龄、学历、职称、职务、学科之间的相互关系，为市场经济条件下，地震科技人才的开发、培养和应用，提供了科学依据。     

Thermogravimetric analysis and kinetic study on pyrolysis of representative medical waste composition

To obtain detailed information on the pyrolysis characteristics, a thermogravimetric study on the pyrolysis of 14 typical medical waste compositions was carried out in thermogravimetric analysis (TGA) equipment using dynamic techniques in a stream of N(2). An index representing pyrolysis reactivity of waste was presented. Kinetic parameters were obtained by Coats-Redfern method and used to model the TG curve. The results showed that: (a) Plastic, protein, cellulosic material, synthetic fibre, and rubber entered pyrolysis process in succession. (b) There was one decomposition stage in the pyrolysis of one-off medical glove, operating glove, cellulosic waste, absorbable catgut suture and adhesive plaster, while other components had two obvious weight loss stages. (c) The obtained apparent activation energy for second stage pyrolysis was comparably higher than that for first stage. (d) Each stage was controlled by only one kinetic mechanism, in which kinetic parameters were constant. (e) The degradation kinetics of medical waste may be affected by special physical and chemical treatment in the product manufacturing process. (f) Among 13 waste samples, the pyrolysis index of cellulosic matter was the highest, which indicated cellulosic matter had strong pyrolysis reactivity. (g) With increasing heating rate, TG curve and DTG peak shifted to high temperatures and main reaction interval of the sample became longer.