Study of the PM<Subscript>10</Subscript> concentration variations along two intra-urban roads within a compact city

Eighty-five measurement campaigns were performed repeatedly to compare the concentration variation profiles along two intra-urban roads—one with open configuration and the other with street canyon effect. Fixed-effects panel data analysis was applied for formulating a model to express the PM₁₀ concentrations along intra-urban roads in terms of parameters like nearby central monitoring data, traffic counts and meteorological conditions with an objective to analyze the PM₁₀ concentration variation patterns along the two roads. Our findings reveal that traffic intensity and metrological conditions exert influence on concentration variation for both types of road configurations while wind velocity only affect the pollutants removal effectiveness of open road configuration. Further analysis unveils that the PM₁₀ concentration distribution profiles within a compact city environment are not always uniform and are dependent on the road configuration. Considerable PM₁₀ concentration differences were observed along the street canyon, and 70% of their variations are attributed to variations in their road aspect ratios. By contrast, no significant concentration difference is observed at open road configurations.     

评估可离子化有机化合物的生物累积潜力：当前的认知和研究的重点

本研究的目的是回顾目前关于可离子化有机化合物(IOCs)的生物累积潜力的认知,重点讨论鱼类经验数据的有效性。IOCs在鱼体内的生物积累潜力可以很好地表征为：依赖pH的鳃摄取和排泄,肠道吸收和磷脂吸附(膜-水分区)。关键的挑战包括缺乏关于IOCs生物转化和血浆结合的经验数据。鱼拥有多种蛋白质,可以在细胞膜上传输IOCs。然而,除了少数情况下,这种传输对环境污染物的吸收和积累的意义是未知的。本文提出了2个研究案例。第一个描述了pH值和生物转化对有机酸和碱的生物富集的建模作用,而第二个则采用了一个更新的模型来研究导致全氟烷基酸积累的因素。全氟化烷基酸个案研究是值得关注的,因为它说明了膜转运蛋白在肾脏中可能具有的重要性,并强调了交叉比对方法(read-across approaches)的潜在价值。认识到当前需要对IOCs进行生物累积危害评估和生态风险评估,作者提供了一个分层策略,从保守的假设(模型和相关数据)到需要化学特定信息的更复杂的模型。
精选自Armitage, J. M., Erickson, R. J., Luckenbach, T., Ng, C. A., Prosser, R. S., Arnot, J. A., Schirmer, K. and Nichols, J. W. (2017), Assessing the bioaccumulation potential of ionizable organic compounds: Current knowledge and research priorities. Environmental Toxicology and Chemistry, 36: 882–897. doi: 10.1002/etc.3680
详情请见http://onlinelibrary.wiley.com/doi/10.1002/etc.3680/full
     

Single-Plant Biocomposite from Ricinus Communis: Preparation, Properties and Environmental Performance

A single-plant biobased composite material was prepared from fibre and matrix constituents produced from the castor plant, ricinus communis. It is shown that the mechanical properties of the castor plant fibres are comparable to those of other bast fibres and that the stiffness and strength characteristics of the castor fibre/polyamide 11 biocomposite compare well with those of other natural fibre composites. By using a biobased thermoplastic matrix material the reliance on non-renewable feedstock sources is reduced and end-of-lifetime recyclability is improved. The analysis of the environmental performance of the new castor plant composite suggests that the biobased material has great potential as a sustainable alternative replacing glass fibre-reinforced plastics.     

Modeling the dynamics of DDT in a remote tropical floodplain: indications of post-ban use?

Significant knowledge gaps exist regarding the fate and transport of persistent organic pollutants like dichlorodiphenyltrichloroethane (DDT) in tropical environments. In Brazil, indoor residual spraying with DDT to combat malaria and leishmaniasis began in the 1950s and was banned in 1998. Nonetheless, high concentrations of DDT and its metabolites were recently detected in human breast milk in the community of Lake Puruzinho in the Brazilian Amazon. In this work, we couple analysis of soils and sediments from 2005 to 2014 at Puruzinho with a novel dynamic floodplain model to investigate the movement and distribution of DDT and its transformation products (dichlorodiphenyldichloroethylene (DDE) and dichlorodiphenyldichloroethane (DDD)) and implications for human exposure. The model results are in good agreement with the accumulation pattern observed in the measurements, in which DDT, DDE, and DDD (collectively, DDX) accumulate primarily in upland soils and sediments. However, a significant increase was observed in DDX concentrations in soil samples from 2005 to 2014, coupled with a decrease of DDT/DDE ratios, which do not agree with model results assuming a post-ban regime. These observations strongly suggest recent use. We used the model to investigate possible re-emissions after the ban through two scenarios: one assuming DDT use for IRS and the other assuming use against termites and leishmaniasis. Median DDX concentrations and p,p′-DDT/p,p′-DDE ratios from both of these scenarios agreed with measurements in soils, suggesting that the soil parameterization in our model was appropriate. Measured DDX concentrations in sediments were between the two re-emission scenarios. Therefore, both soil and sediment comparisons suggest re-emissions indeed occurred between 2005 and 2014, but additional measurements would be needed to better understand the actual re-emission patterns. Monte Carlo analysis revealed model predictions for sediments were very sensitive to highly uncertain parameters associated with DDT degradation and partitioning. With this model as a tool for understanding inter-media cycling, additional research to refine these parameters would improve our understanding of DDX fate and transport in tropical sediments.     

The effects of driver factors and sign design features on the comprehensibility of traffic signs

PROBLEM: This paper addresses the effects of driver factors and sign design features on the comprehensibility of traffic signs. METHODS: A survey was designed to capture subjects' personal particulars, ratings on sign features, and comprehension scores, and then administered to 109 Hong Kong full driving license holders. RESULTS: Years with driving license and education level were significant predictors of sign comprehensibility. Contrary to expectation, the driver factors of age group, years of active driving, hours of driving, last time driving, driving frequency, and non-local driving experience had no effect on comprehension performance. Sign familiarity was correlated with comprehension score for licensed drivers, whereas sign concreteness, simplicity, and meaningfulness were not. IMPACT ON INDUSTRY: The results of this study provide useful guidelines for designing more user-friendly traffic signs in the future. It identified particular driver groups who lacked good understanding of traffic signs, and this information may assist the relevant organizations to better allocate traffic training resources, and better target future studies of traffic sign comprehension.     

Comments on explosion problems for hydrogen safety

The future widespread use of hydrogen as an energy carrier brings in safety issues that have to be addressed before public acceptance can be achieved. The prediction of the consequences of a major accident release of hydrogen into the atmosphere or the contamination of high-pressure hydrogen storage facilities by air entrainment requires a good knowledge of the explosion parameters of hydrogen–air mixtures. The present paper reviews and comments on the current knowledge of dynamic parameters of hydrogen detonation for hazard assessment. The major problem that remains to be resolved involves the understanding of the effect of turbulence on the cellular detonation structure, the propagation of high-speed deflagrations and the transition from deflagration to detonations. It is recommended that future research should be aimed towards experiments that permit the quantitative understanding of the mechanisms of high-speed turbulent combustion rather towards large-scale tests in complex geometries where minimal quantitative information of fundamental significance could be extracted. In spite of its wide flammability and sensitivity to ignition and detonation initiation, it is felt that hydrogen can be produced, stored and handled safely with the appropriate considerations in the design of the hydrogen facilities.     

Alternative immunofluorescent labeling of Cryptosporidium parvum in water samples using semiconductor quantum dots

The application of immunofluorescent labeling using quantum dots for detection of inactivated Cryptosporidium parvum oocysts in spiked water samples (reservoir water, treated wastewater effluent, permeate of a membrane bioreactor, and tap water) provided more consistent results compared with the organic fluorophores label. The varying degree of particles present in the different water samples (with turbidity ranging from 0.2 to 6.1 NTU) in nonconcentrated water samples had insignificant interference on the labeled counts (2-sample t-tests, p > 0.236) using the quantum dot label, while the quantum dot label provided an advantage of approximately 50% lower interference in concentrated water samples compared with the organic fluorophores label.     

Environmental Quality Of Urban Parks And Open Spaces In Hong Kong

It is widely purported that urban parks and open spaces can improve the urban environment by cleansing the air and reducing the noise. However, such environmental functions can be constrained by the size and the location of urban parks in very dense cities. This study examines the air and acoustic environment and heavy metal contamination in Hong Kong urban parks and open spaces. Using a hybrid field measurement and computer simulation approach, the study has found that while the air quality in urban parks is better than that of the roadside, it is not significantly different from that of the ambient conditions. Noise levels in the urban parks are not significantly lower than those at the typical home environment in Hong Kong. Heavy metals in urban park dust are slightly lower than that found at the roadside and are broadly comparable to those found at typical homes and nursery schools. These findings lend support to the postulation that the capability of urban parks and open spaces in dense cities to improve the urban environment is rather limited and call for a re-examination of the role of urban parks in enhancing urban livability. The findings also have implications on how urban parks in dense cities should be designed and managed.     

Identification and quantification of bisphenol A by gas chromatography and mass spectrometry in a lab-scale dual membrane system

Endocrine disruptor contamination is an emerging issue of concern in the field of water quality engineering. In this study, a lab-scale microfiltration (MF) and reverse osmosis (RO) based water reclamation system was set up to monitor and evaluate the removal of bisphenol A (BPA), which is a known oestrogenic compound. The identification and quantification of BPA were performed by using gas chromatography coupled with mass spectrometry. It was noted that the detection method used in this study was able to achieve an average recovery ranging from 88.2 to 94.1% of BPA with standard deviations of less than 10% in different spiked samples. The detection limit of the analytical protocol was determined at 20 ng L(-1). Based on the analytical protocol, it was noted that a low level of BPA (1.18-3.04 microg L(-1)) could be detected in feed water (effluent of an activated sludge treatment system) to the dual membrane water reclamation system. The results obtained suggested that BPA could be easily chlorinated by sodium hypochlorite with a dosage of 4 to 5 mg L(-1) and a contact time of 1 to 2 min. In this lab-scale study, a satisfactory removal of BPA was readily obtained by RO and BPA was abated to an undetectable level in the product water. It was noted that the RO rejection characteristic of BPA was not sensitive to the variations in raw feed water characteristics experienced in this study. In addition, it was noted that BPA concentration present in raw feed water did not exert any significant impact on RO performance in terms of BPA rejection. The results of this study demonstrated that membrane technology could be effectively used for BPA removal.     

Simultaneous removal of Congo red and cadmium(II) from aqueous solutions using graphene oxide–silica composite as a multifunctional adsorbent

Graphene oxide is a very high capacity adsorbent due to its functional groups and π?π interactions with other compounds. Adsorption capacity of graphene oxide, however, can be further enhanced by having synergistic effects through the use of mixed-matrix composite. In this study, silica-decorated graphene oxide (SGO) was used as a high-efficiency adsorbent to remove Congo red (CR) and Cadmium (II) from aqueous solutions. The effects of solution initial concentration (20 to 120 mg/l), solution pH (pH 2 to 7), adsorption duration (0 to 140 min) and temperature (298 to 323 K) were measured in order to optimize the adsorption conditions using the SGO adsorbent. Morphological analysis indicated that the silica nanoparticles could be dispersed uniformly on the graphene oxide surfaces. The maximum capacities of adsorbent for effective removal of Cd (II) and CR were 43.45 and 333.33 mg/g based on Freundlich and Langmuir isotherms, respectively. Langmuir and Freundlich isotherms displayed the highest values of Q_max for CR and Cd (II) adsorption in this study, which indicated monolayer adsorption of CR and multilayer adsorption of Cd (II) onto the SGO, respectively. Thermodynamic study showed that the enthalpy (ΔH) and Gibbs free energy(ΔG) values of the adsorption process for both pollutants were negative, suggesting that the process was spontaneous and exothermic in nature. This study showed active sites of SGO (π-π, hydroxyl, carboxyl, ketone, silane-based functional groups) contributed to an enormous enhancement in simultaneous removal of CR and Cd (II) from an aqueous solution, Therefore, SGO can be considered as a promising adsorbent for future water pollution control and removal of hazardous materials from aqueous solutions.