Adaptation of urine source separation in tropical cities: Process optimization and odor mitigation

Source-separating urine from other domestic wastewaters promotes a more sustainable municipal wastewater treatment system. This study investigated the feasibility and potential issues of applying a urine source-separation system in tropical urban settings. The results showed that source-separated urine underwent rapid urea-hydrolysis (ureolysis) at temperatures between 34–40^oC, stale/fresh urine ratios greater than 40%, and/or with slight fecal cross-contamination. Undiluted (or low-diluted) urine favored ureolysis; this can be monitored by measuring conductivity as a reliable and efficient indicator. The optimized parameters demonstrated that an effective urine source-separation system is achievable in tropical urban areas. On the other hand, the initial release of CO₂ and NH₃ led to an elevated pressure in the headspace of the collection reservoir, which then dropped to a negative value, primarily due to oxygen depletion by the microbial activity in the gradually alkalized urine. Another potential odor source during the ureolysis process was derived from the high production of volatile fatty acids (VFA), which were mainly acetic, propanoic, and butyric acids. Health concerns related to odor issues might limit the application of source separation systems in urban areas; it is therefore vital to systematically monitor and control the odor emissions from a source separation system. As such, an enhanced ureolysis process can attenuate the odor emissions.

Implications: Urine source separation is promising to improve the management of domestic wastewater in a more sustainable way. The work demonstrates the achievability of an effective urine source-separation system in tropical urban areas. The installation of urine-stabilization tanks beneath high-rise buildings lowers the risk of pipe clogging. Conductivity measurement can be utilized as a reliable process indicator for an automated system. However, urine hydrolysis raises a strong potential of odor emission (both inorganic and organic), which might limit the application of source separation systems in urban areas. An enhanced ureolysis process could shorten and attenuate the odor emissions.     

The fate and transport of arsenic species in the aquatic ecosystem: a case study on Bestari Jaya,Peninsular Malaysia

The field of arsenic pollution research has grown rapidly in recent years. Arsenic constitutes a broad range of elements from the Earth’s crust and is released into the environment from both anthropogenic and natural sources due to its relative mobility under different redox conditions. The toxicity of arsenic is described in its inorganic form, as inorganic arsenic compounds can leach into different environments. Sampling was carried out in the Bestari Jaya catchment while using a land use map to locate the site, and experiments were conducted via sequential extraction and inductively coupled plasma optical emission spectroscopy to quantify proportions of arsenic in the sediment samples. The results show that metals in sediments of nonresidual fractions, which are more likely to be likely released into aquatic environments, are more plentiful than the residual sediment fractions. These findings support the mobility of heavy metals and especially arsenic through sediment layers, which can facilitate remediation in environments heavily polluted with heavy metals.     

Iodide-assisted total lead measurement and determination of different lead fractions in drinking water samples

Lead and its compounds are toxic and can harm human health, especially the intelligence development in children. Accurate measurement of total lead present in drinking water is crucial in determining the extent of lead contamination and human exposure due to drinking water consumption. The USEPA method for total lead measurement (no. 200.8) is often used to analyze lead levels in drinking water. However, in the presence of high concentration of the tetravalent lead corrosion product PbO(2), the USEPA method was not able to fully recover particulate lead due to incomplete dissolution of PbO(2) particles during strong acid digestion. In this study, a new procedure that integrates membrane separation, iodometric PbO(2) measurement, strong acid digestion and ICP-MS measurement was proposed and evaluated for accurate total lead measurement and quantification of different lead fractions including soluble Pb(2+), particulate Pb(II) carbonate and PbO(2) in drinking water samples. The proposed procedure was evaluated using drinking water reconstituted with spiked Pb(2+), spiked particulate Pb(II) carbonate and in situ formed or spiked PbO(2). Recovery tests showed that the proposed procedure and the USEPA method can achieve 93-112% and 86-103% recoveries respectively for samples containing low PbO(2) concentrations (0.018-0.076 mg Pb per L). For samples containing higher concentrations of PbO(2) (0.089-1.316 mg Pb per L), the USEPA method failed to meet the recovery requirement for total lead (85-115%) while the proposed method can achieve satisfactory recoveries (91-111%) and differentiate the soluble Pb(2+), particulate Pb(II) carbonate and PbO(2).     

The geomorphology and ecosystem service economic value baselines of tributary watersheds in Malaysia

Environment, Development and Sustainability - This study presents how a cluster of tributary watersheds was evaluated for geomorphology and ecosystem service economic value baselines. Tributary...     

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.     

Impact of ozone assisted ultrasonication pre-treatment on anaerobic digestibility of sewage sludge

Impact of ultrasonication(ULS) and ultrasonication–ozonation(ULS-Ozone) pre-treatment on the anaerobic digestibility of sewage sludge was investigated with semi-continuous anaerobic reactors at solid retention time(SRT) of 10 and 20 days. The control, ULS and ULS-Ozone reactors produced 256, 309 and 348 m L biogas/g CODfedand the volatile solid(VS) removals were 35.6%, 38.3% and 42.1%, respectively at SRT of 10 days. At SRT of20 days, the biogas yields reached 313, 337 and 393 m L biogas/g CODfedand the VS removal rates were 37.3%, 40.9% and 45.3% in the control, ULS and ULS-Ozone reactors, respectively.ULS-Ozone pre-treatment increased the residual organic amount in the digested sludge.These soluble residual organics were found to contain macromolecules with molecular weights(MW) larger than 500 k Da and smaller polymeric products with MW around 19.4and 7.7 k Da. These compounds were further characterized to be humic acid-like substances with fluorescent spectroscopy analysis.     

Nitrous oxide emission by denitrifying phosphorus removal culture using polyhydroxyalkanoates as carbon source

Nitrous oxide (N₂O) emission has been reported to be enhanced during denitrification when internally-stored compounds are used as carbon sources. However, negligible N₂O emissions have been detected in the few studies where polyhydroxyalkanoates (PHA) were specifically used. This study investigated and compared the potential enhancement of N₂O production, based on utilization of an internally-stored polymer and external carbon (acetate) by a denitrifying phosphorus removal culture. Results indicated that at relatively low chemical oxygen demand-to-nitrogen (COD/N) ratios, more nitrite was reduced to N₂O in the presence of an external carbon source as compared to an internal carbon source (PHA). At relatively higher COD/N ratios, similar N₂O reduction rates were obtained in all cases regardless of the type of carbon source available. N₂O reduction rates were, however, generally higher in the presence of an internal carbon source. Results from the study imply that when the presence of an external carbon source is not sufficient to support denitrification, it is likely competitively utilized by different metabolic pathways of denitrifying polyphosphate accumulating organisms (DPAOs) and other ordinary denitrifiers. This study also reveals that the consumption of PHA is potentially the rate-limiting step for N₂O reduction during denitrification.     

Fetal methylmercury exposure as measured by cord blood mercury concentrations in a mother-infant cohort in Hong Kong

This study was designed to examine newborn infants in Hong Kong prenatally exposed to levels of methylmercury considered to increase risk of neurotoxic effects and to examine subject characteristics that modify the degree of prenatal mercury exposure. Mercury concentrations in 1057 sets of maternal and cord blood samples and 96 randomly selected maternal hair samples were measured. Subject characteristics were measured or collected by questionnaire. Of the 1057 cord blood samples collected only 21.6% had mercury concentrations less than 29 nmol/L (5.8 micro g/L). Median maternal hair mercury concentration was 1.7 ppm. The geometric mean cord to maternal blood mercury ratio was 1.79 to 1. Increasing maternal fish consumption and maternal age were found to be associated with increased cord blood mercury concentrations. Marine fish consumption increased cord blood mercury concentrations more than freshwater fish (5.09%/kg vs 2.86%/kg). Female babies, maternal alcohol consumption and increasing maternal height were associated with decreased cord blood mercury concentrations. Pregnant women in Hong Kong consume large amounts of fish and as a result, most of their offspring have been prenatally exposed to moderately high levels of mercury. In this population, pregnant women should choose freshwater over marine fish and limit fish consumption.     

Determination of effects of turbulence flow in a cathode environment on electricity generation using a tidal mud-based cylindrical-type sediment microbial fuel cell

We examined the possibility of harvesting electricity from the surface of a tidal mud flat using a cylindrical-type sediment microbial fuel cell (SMFC), a marine mud battery (MMB), which can be applied in a sea environment where the ebb and flow occur due to tidal difference. In addition, we indirectly investigated the influence of ebb and flow in a lab, using aeration, argon gassing, and by agitating the cathodic solution. The MMBs consisted of cylindrical acrylic compartments containing a nylon membrane, an anode, and a cathode in a single body. The MMBs were stuck vertically into an artificial tidal mud flat such that the anode electrode was in direct contact with the tidal mud surface. As a result, the maximum current and power density generated were 35 mA/m² and 9 mW/m², respectively, thus verifying that it is possible to harvest electricity from the surface of a tidal mud flat using an MMB without burying the anode electrode in the tidal mud. Furthermore, the results of tests using an artificial turbulence flow showed the flow induced by the tidal ebb and flow could allow the performance of MMBs to be enhanced.