Carbon and nitrogen losses by surface runoff following changes in vegetation

Rainfall simulation experiments were conducted on annual grassland and coastal sage scrub hillslopes to determine the quantities of C and N removed by surface runoff in sediment and solution. Undisturbed coastal sage scrub soils have very high infiltration capacities (> 140 mm h(-1)), preventing the generation of surface runoff. Trampling disturbance to the sage scrub plots dramatically reduced infiltration capacities, increasing the potential for surface runoff and associated nutrient loss. Infiltration capacities in the grassland plots (30-50 mm h(-1)) were lower than in the sage scrub plots. Loss rates of dissolved C and N in surface runoff from grasslands were 0.5 and 0.025 mg m(-2) s(-1) respectively, with organic N accounting for more than 50% of the dissolved N. Total dissolved losses with simulated rainfall were higher than losses in simulations with just surface runoff, demonstrating the importance of raindrop impact in transferring solutes into the flow. Experimental data were incorporated into a numerical model of runoff and sediment transport to estimate hillslope-scale sediment-bound nutrient losses from grasslands. According to the model results, sediment-bound nutrient losses are sensitive to the density of vegetation cover and rainfall intensity. The model estimates annual losses in surface runoff of 0.2 and 0.02 g m(-2) for sediment-hound C and N, respectively. The results of this study suggest that conversion of coastal sage scrub to annual grasslands increases hillslope nutrient losses and may affect stream water quality in the region.     

Maternal serum leptin concentration during the second trimester of pregnancy: association with fetal chromosomal abnormalities

Recent studies suggest that leptin, the product of the obese gene, is produced by the placenta during pregnancy. The present study addressed the question whether second trimester maternal serum leptin could be altered by fetal Down syndrome or Edwards syndrome. Maternal serum leptin concentrations were measured in 18 pregnancies complicated with Down syndrome, six pregnancies complicated with Edwards syndrome and 183 uncomplicated pregnancies during the second trimester of pregnancy. The present results demonstrate that leptin concentrations in uncomplicated pregnancies slightly decrease from the 16th week of pregnancy, reaching a minimum of 18.8 ng/ml around the 20th week, and then rapidly increase to 28.2 ng/ml by the 24th week. Leptin correlation with maternal body weight decreases from r=0.695 at 16–17 week of gestation to r=0.544 at >22 weeks of gestation. There was no significant difference between the mean MoMs of Down syndrome- (0.926) or Edwards syndrome- (0.960) affected pregnancies and normal pregnancies (1.002). A weak correlation (r=0.18, p<0.02) was observed between corrected leptin MoMs and human chorionic gonadotrophin (hCG) MoMs in normal pregnancies. It is assumed that around the 20th week of pregnancy placental leptin production is activated or at least is accelerated and it is added to the amount of leptin produced by maternal adipose tissue. Fetal Down syndrome or Edwards syndrome does not seem to alter maternal leptin concentration and therefore leptin cannot be used as a marker for these chromosomal abnormalities in the early second trimester of pregnancy. Copyright © 2002 John Wiley & Sons, Ltd.     

Effects of untreated hospital effluents on the accumulation of toxic metals in sediments of receiving system under tropical conditions: Case of South India and Democratic Republic of Congo

Physicochemical and ecotoxicological analyses have been performed to assess the quality of sediments receiving untreated hospital effluents from Indian and Democratic Republic of Congo (DRC) hospitals. The sediments were collected monthly and characterized for grain size, organic matter, total organic carbon, total carbon, nitrogen, phosphorus, toxic metals and ecotoxicity. The results highlight the high concentration of toxic metals from the Indian hospital effluent receiving systems, especially for Cr, Cu, As, Zn and Hg. On the other hand, the metal concentrations in the sediment receiving system from DRC are low (e.g. maximum Hg and Zn concentration were 0.46 and 48.84 mg kg⁻¹ respectively). Ostracods exposed to sediment samples H2 (September month sample) and H3 (June and September month samples) were found dead after 6 d of exposure whereas the higher mortality rate for Congo sediments was 23% but was accompanied with 33 ± 7% of growth inhibition. The results of this study show the variation of sediment composition on toxic metal levels as well as toxicity related to both, the type of hospitals and the sampling period. Additionally, hospital effluent disposal practices at the study sites can lead to the pollution of water resources and may generate risks for aquatic organisms and human health.     

Impact of sewage sludge spreading on nickel mobility in a calcareous soil: adsorption–desorption through column experiments

A soil column adsorption–desorption study was performed on an agricultural calcareous soil to determine the impact of sewage sludge spreading on nickel mobility. Ni adsorption experiments were followed by desorption tests involving the following liquid extractants: water, calcium (100 mg/L), oxalic acid (525 mg/L equivalent to 100 mg carbon/L), and sludge extracts (0.5 and 2.5 g/L). Desorption tests were also conducted after sewage sludge spreading at three application rates (30, 75, and 150 t/ha). According to the breakthrough curve, Ni adsorption was irreversible and occurred mainly through interactions with calcite surface sites. Nickel desorption from the soil column was promoted in presence of significant dissolved organic carbon (DOC) concentration as observed with oxalic acid elution and sludge extract at 2.5 g/L. In sludge-amended soil columns, the maximum Ni levels occurred in first pore volumes, and they were positively correlated to the sludge application rate. The presence of DOC in leaching waters was the main factor controlling Ni desorption from the sludge-amended soil columns. This finding implies that DOC generated by sludge applied on calcareous soils might facilitate the leaching of Ni due to the formation of soluble Ni–organic complexes. Thus, sludge application can have potential environmental impacts in calcareous soils, since it promotes nickel transport by decreasing Ni retention by soil components.     

Assessment of nitrate pollution in the Grand Morin aquifers (France): combined use of geostatistics and physically based modeling

The objective of this work is to combine several approaches to better understand nitrate fate in the Grand Morin aquifers (2700 km(2)), part of the Seine basin. cawaqs results from the coupling of the hydrogeological model newsam with the hydrodynamic and biogeochemical model of river ProSe. cawaqs is coupled with the agronomic model Stics in order to simulate nitrate migration in basins. First, kriging provides a satisfactory representation of aquifer nitrate contamination from local observations, to set initial conditions for the physically based model. Then associated confidence intervals, derived from data using geostatistics, are used to validate cawaqs results. Results and evaluation obtained from the combination of these approaches are given (period 1977-1988). Then cawaqs is used to simulate nitrate fate for a 20-year period (1977-1996). The mean nitrate concentrations increase in aquifers is 0.09 mgN L(-1)yr(-1), resulting from an average infiltration flux of 3500 kgN.km(-2)yr(-1).     

Advantages and possibilities of solid recovered fuel cocombustion in the European energy sector

The 1999/31 Elemental Carbon Directive sets strict rules on the disposal of untreated municipal solid waste in the European Union countries and forces a reduction of the biodegradable quantities disposed off to landfills up to 35% of the amount produced in 1995 in the coming decade. More environmentally friendly waste management options shall be promoted under the framework of the Community Waste Strategy ([96] 399 Final). In this context, the production and thermal use of solid recovered fuels (SRFs), derived from nonhazardous bioresidues and mixed- and mono-waste streams, could be a key element in a future waste management system. Within the scope of the European Demonstration Project, RECOFUEL, SRF cocombustion was demonstrated in two large-scale lignite-fired coal boilers at RWE power station in Weisweiler, Germany. As a consequence of the high biogenic share of the cocombusted material, this approach can be considered beneficial following European Directive 2001/77/EC on electricity from renewable energy sources (directive). During the experimental campaign, the share of SRF in the overall thermal input was adjusted to approximately 2%, resulting into a feeding rate of approximately 25 t/hr. The measurement campaign included boiler measurements in different locations, fuel and ash sampling, and its characterization. The corrosion rates were monitored by dedicated corrosion probes. The overall results showed no significant influence of SRF cocombustion on boiler operation, emissions behavior, and residues quality for the thermal shares applied. Also, no effect of the increased chlorine concentration of the recovered fuel was observed in the flue gas path after the desulfurization unit.     

A simple urban dispersion model tested with tracer data from Oklahoma City and Manhattan

A simple urban dispersion model is tested that is based on the Gaussian plume model and modifications to the Briggs urban dispersion curves. An initial dispersion coefficient (σ_o) of 40 m is assumed to apply in built-up downtown areas, and the stability is assumed to be slightly unstable during the day and slightly stable during the night. Observations from tracer experiments during the Joint Urban 2003 (JU2003) field study in Oklahoma City and the Madison Square Garden 2005 (MSG05) field study in Manhattan are used for model testing. The tracer SF₆ was released during JU2003 near ground level in the downtown area and concentrations were observed at over 100 locations within 4 km from the source. Six perfluorocarbon tracer (PFT) gases were released near ground level during MSG05 and sampled by about 20 samplers at the surface and on building roofs. The evaluations compare concentrations normalized by source release rate, C/Q, for each sampler location and each tracer release, where data were used only if both the observed and predicted concentrations exceeded threshold levels. At JU2003, for all samplers and release times, the fractional mean bias (FB) is about 0.2 during the day (20% mean underprediction) and 0.0 during the night. About 45 –50% of the predictions are within a factor of two (FAC2) of the observations day and night at JU2003. The maximum observed C/Q is about two times the maximum predicted C/Q both day and night. At MSG05, for all PFTs, surface samplers, and release times, FB is 0.14 and FAC2 is about 45%. The overall 60 min-averaged maximum C/Q is underpredicted by about 40% for the surface samplers and is overpredicted by about 25% for the building-roof samplers.     

Thermal exploitation of wastes with lignite for energy production

The thermal exploitation of wastewood with Greek lignite was investigated by performing tests in a laboratory-scale fluidized bed reactor, a 1-MW(th) semi-industrial circulating fluidized bed combustor, and an industrial boiler. Blends of natural wood, demolition wood, railroad sleepers, medium-density fiberboard residues, and power poles with lignite were used, and the co-combustion efficiency and the effect of wastewood addition on the emitted pollutants were investigated. Carbon monoxide, sulfur dioxide, and oxides of nitrogen emissions were continuously monitored, and, during the industrial-scale tests, the toxic emissions (polychlorinated dibenzodioxins and dibenzofurans and heavy metals) were determined. Ash samples were analyzed for heavy metals in an inductively coupled plasma-atomic emission spectroscopy spectrophotometer. Problems were observed during the preparation of wastewood, because species embedded with different compounds, such as railway sleepers and demolition wood, were not easily treated. All wastewood blends were proven good fuels; co-combustion proceeded smoothly and homogeneous temperature and pressure profiles were obtained. Although some fluctuations were observed, low emissions of gaseous pollutants were obtained for all fuel blends. The metal element emissions (in the flue gases and the solid residues) were lower than the legislative limits. Therefore, wastewood co-combustion with lignite can be realized, provided that the fuel handling and preparation can be practically performed in large-scale installations.