排序方式: 共有113条查询结果,搜索用时 15 毫秒
11.
介绍了柳毛石墨矿选厂的矿石性质、石墨分选工艺特点等;针对其存在的问题,提出采用振磨机代替球磨等改造措施,可生产出高品质石墨精矿,并可降低能耗,提高经济效益。 相似文献
12.
13.
陈俊涛 《数码设计:surface》2021,(10):52-53
随着当前技术的发展,智能技术已经得到了普及,在这样的情况下,使用智慧技术能够解决很多当前存在的问题,在大型泵站之中,在日常的检查之中,因人工、环境以及光照等问题的影响,对于实际中存在的问题不能够及时发现并解决,同时由于对设备保障可靠性的要求在不断提高,人员安全要求在不断提高,所以在智慧技术高速发展的情况下,对于当前大型泵站电气设备巡视检查工作存在的问题、难点可以利用智能设备进行解决。本文主要对大型泵站自动巡检机器人进行分析,从而对当前的大型泵站智慧技术的运用进行分析。 相似文献
14.
针对地下厂房岩锚梁与围岩接触问题,分别构建了模拟岩锚梁与围岩接触面非线性特征的有限元数学模型和力学模型。在Desai薄层单元基础上,推导了岩锚梁接触面单元有限元形式;结合非线性弹性理论和弹塑性理论,提出了岩锚梁接触面三维非线性力学模型,该力学模型能够模拟岩锚梁接触面弹性阶段的非线性现象和塑性阶段的损伤软化现象。针对岩锚梁接触面闭合、张开、剪切滑动等变形特征,提出了考虑接触面粘结、开裂、滑移现象的分段式抗滑安全系数。详细地论述了本文提出模型的有限元迭代方法,并据此编写了有限元程序。将本文模型应用于某地下厂房岩锚梁有限元分析计算中,应用效果良好。 相似文献
15.
采用共沉淀法制备出蛭石–Fe_2O_3/MnO_2非均相Fenton催化剂,并利用该催化剂高效降解水中罗丹明B染料。利用X射线荧光光谱分析、N_2吸附、扫描电子显微镜、能谱分析仪以及X射线光电子能谱对材料进行了表征。结果表明:在室温,催化剂投加量0.1 g/L、H2O2投加量10.0 mmol/L、溶液初始p H=4.5以及罗丹明B浓度为90.0 mg/L的条件下,反应50 min罗丹明B的脱色率达到98.76%。运用一级动力学方程对反应过程进行拟合,R20.97。根据罗丹明B最大吸收峰位置的变化,推断反应体系中可能发生的反应并进行了自由基掩蔽实验。 相似文献
16.
17.
18.
大型地下洞室地震灾变过程三维动力有限元模拟 总被引:2,自引:1,他引:1
The earthquake impact is a major external factor influencing the long term stability of underground caverns. Time-history analysis method is able to simulate the earthquake response of surrounding rock in underground caverns during earthquake disaster process. It has been proved to be an effective method to analyze the aseismic issue of underground caverns. The numerical simulation system using three-dimensional dynamic finite element method is developed to study the earthquake disaster in underground caverns. Central difference method is employed in this system to solve the problem. To enhance the solving speed,parallel procedures and hybrid Gauss point integration method are proposed in programming. Strengthening features of materials under high strain rate and damage features of surrounding rock under cyclic loading are considered. The dynamic constitutive model for rock masses is presented. It is suitable for the aseismic analysis of underground caverns. Visco-elastic boundary is adopted in artificial boundary. The spatial oblique incident method which is suitable for the aseismic analysis of underground caverns is proposed. It is able to reflect the specific incident direction,the multi-incident surfaces and the inconsistency of seismic wave. An example is given to verify the correctness of the developed system by comparing its calculation results with common software?s calculation results. A case study is then conducted to simulate the earthquake disaster process of the cave-typed underground caverns at Lujichang hydropower plant. The results derived from time-history analysis indicate the reliability and practicability of the developed system. 相似文献
19.
地下厂房岩锚吊车梁部位倾斜布置的长锚杆是吊车梁与岩体相互传力的重要纽带。根据长锚杆周围介质的差异将单根锚杆分为梁体段、围岩段2个部分,基于中性点理论及锚杆拉拔作用特性,研究了长锚杆、梁体混凝土和围岩三者在梁体自重荷载、岩体开挖释放荷载以及吊车轮压荷载下的联合受力机制,并建立了包含沥青介质在内的锚固体力学模型,提出了一种适用于岩锚梁稳定分析的长锚杆受力计算方法。最后采用三维弹塑性非线性有限元法,结合锚杆受力算法,以某水电站地下厂房为背景,对吊车梁施工与运行期全过程进行了数值模拟分析。工程实例计算结果能够较为合理地反映长锚杆的受力特性,锚杆受力数值结果与监测值有较好的吻合度。 相似文献
20.
介绍了地下工程位移反分析的原理之后,对常规的变尺度法进行改进,利用基于Broyden族的最优自调节变尺度法对尺度矩阵进行修正,使用向前差商来逼近梯度,采用Wolfe准则进行不精确线性搜索来确定最优步长,从而得到带一维不精确搜索的最优自调节差商变尺度法,提高了反分析的数值稳定性、收敛性和可靠性;同时提出了反演结果的检验方法和局部最优解的改善方法.最后并将其应用于某地下厂房的参数反演分析.实例表明,该方法具有收敛速度快,数值稳定性好的特点. 相似文献