Biogenic carbon flows through the planktonic food web of the Amundsen Gulf (Arctic Ocean): A synthesis of field measurements and inverse modeling analyses

Major pathways of biogenic carbon (C) flow are resolved for the planktonic food web of the flaw lead polynya system of the Amundsen Gulf (southeast Beaufort Sea, Arctic Ocean) in spring-summer 2008. This period was relevant to study the effect of climate change on Arctic marine ecosystems as it was characterized by unusually low ice cover and warm sea surface temperature. Our synthesis relied on a mass balance estimate of gross primary production (GPP) of 52.5 ± 12.5 g C m⁻² calculated using the drawdown of nitrate and dissolved inorganic C, and a seasonal f-ratio of 0.64. Based on chlorophyll a biomass, we estimated that GPP was dominated by phytoplankton (93.6%) over ice algae (6.4%) and by large cells (>5 μm, 67.6%) over small cells (<5 μm, 32.4%). Ancillary in situ data on bacterial production, zooplankton biomass and respiration, herbivory, bacterivory, vertical particle fluxes, pools of particulate and dissolved organic carbon (POC, DOC), net community production (NCP), as well as selected variables from the literature were used to evaluate the fate of size-fractionated GPP in the ecosystem. The structure and functioning of the planktonic food web was elucidated through inverse analysis using the mean GPP and the 95% confidence limits of every other field measurement as lower and upper constraints. The model computed a net primary production of 49.2 g C m⁻², which was directly channeled toward dominant calanoid copepods (i.e. Calanus hyperboreus 20%, Calanus glacialis 10%, and Metridia longa 10%), other mesozooplankton (12%), microzooplankton (14%), detrital POC (18%), and DOC (16%). Bacteria required 29.9 g C m⁻², a demand met entirely by the DOC derived from local biological activities. The ultimate C outflow comprised respiration fluxes (82% of the initial GPP), a small sedimentation (3%), and a modest residual C flow (15%) resulting from NCP, dilution and accumulation. The sinking C flux at the model limit depth (395 m) supplied 60% of the estimated benthic C demand (2.8 g C m⁻²), suggesting that the benthos relied partly on other C sources within the bottom boundary layer to fuel its activity. In summary, our results illustrate that the ongoing decline in Arctic sea ice promotes the growth of pelagic communities in the Amundsen Gulf, which benefited from a ∼80% increase in GPP in spring-summer 2008 when compared to 2004 – a year of average ice conditions and relatively low GPP. However, 53% of the secondary production was generated within the microbial food web, the net ecological efficiency of zooplankton populations was not particularly high (13.4%), and the quantity of biogenic C available for trophic export remained low (6.6 g C m⁻²). Hence it is unlikely that the increase in lower food web productivity, such as the one observed in our study, could support new harvestable fishery resources in the offshore Beaufort Sea domain.     

Coupling mechanisms in double sandbar systems. Part 2: impact on alongshore variability of inner‐bar rip channels

Double sandbar systems are common morphological features along sandy, wave‐dominated, micro‐ to meso‐tidal coastlines. In the companion paper, we demonstrated how various alongshore inner‐bar rip‐channel patterns can develop through morphological coupling to an alongshore‐variable outer bar. The simulated coupling patterns are, however, scarcely observed in the field. Instead, inner‐bar rip channels more often possess remarkably smaller and more variable alongshore length scales, suggesting that coupling mechanisms do not play a substantial role in the overall double‐sandbar dynamics. Here we use a numerical model to show that the relative importance of self‐organization and morphological coupling changes in favour of the latter with an increase in waterdepth variability along the outer‐bar crest. Furthermore, we find that the typical alongshore variability in inner‐bar rip‐channel scale is indicative of a mixture of self‐organization and morphological coupling rather than self‐organization alone. Morphological coupling may thus be more important to understanding and predicting the evolution of inner‐bar rip channels than previously envisaged. Copyright © 2010 John Wiley and Sons, Ltd.     

A case study of the mesoscale dynamics in the North-Western Mediterranean Sea: a combined data–model approach

The Northern current is the main circulation feature of the North-Western Mediterranean Sea. While the large-scale to mesoscale variability of the northern current (NC) is well known and widely documented for the Ligurian region, off Nice or along the Gulf of Lions shelf, few is known about the current instabilities and its associated mesoscale dynamics in the intermediate area, off Toulon. Here, we took advantage of an oceanographic cruise of opportunity, the start of a HF radar monitoring programme in the Toulon area and the availability of regular satellite sea surface temperature and chlorophyll a data, to evaluate the realism of a NEMO-based regional high-resolution model and the added value brought by HF radar. The combined analysis of a 1/64° configuration, named GLAZUR64, and of all data sets revealed the occurrence of an anticyclonic coastal trapped eddy, generated inside a NC meander and passing the Toulon area during the field campaign. We show that this anticyclonic eddy is advected downstream along the French Riviera up to the study region and disturbs the Northern current flow. This study aims to show the importance of combining observations and modelling when dealing with mesoscale processes, as well as the importance of high-resolution modelling.     

The information system of the French Peatland Observation Service: Service National d'Observation Tourbières – A valuable tool to assess the impact of global changes on the hydrology and biogeochemistry of temperate peatlands through long term monitoring

Mitigating and adapting to global changes requires a better understanding of the response of the Biosphere to these environmental variations. Human disturbances and their effects act in the long term (decades to centuries) and consequently, a similar time frame is needed to fully understand the hydrological and biogeochemical functioning of a natural system. To this end, the ‘Centre National de la Recherche Scientifique’ (CNRS) promotes and certifies long-term monitoring tools called national observation services or ‘Service National d'Observation’ (SNO) in a large range of hydrological and biogeochemical systems (e.g., cryosphere, catchments, aquifers). The SNO investigating peatlands, the SNO ‘Tourbières’, was certified in 2011 ( https://www.sno-tourbieres.cnrs.fr/ ). Peatlands are mostly found in the high latitudes of the northern hemisphere and French peatlands are located in the southern part of this area. Thus, they are located in environmental conditions that will occur in northern peatlands in coming decades or centuries and can be considered as sentinels. The SNO Tourbières is composed of four peatlands: La Guette (lowland central France), Landemarais (lowland oceanic western France), Frasne (upland continental eastern France) and Bernadouze (upland southern France). Thirty target variables are monitored to study the hydrological and biogeochemical functioning of the sites. They are grouped into four datasets: hydrology, fluvial export of organic matter, greenhouse gas fluxes and meteorology/soil physics. The data from all sites follow a common processing chain from the sensors to the public repository. The raw data are stored on an FTP server. After operator or automatic processing, data are stored in a database, from which a web application extracts the data to make them available ( https://data-snot.cnrs.fr/data-access/ ). Each year at least, an archive of each dataset is stored in Zenodo, with a digital object identifier (DOI) attribution ( https://zenodo.org/communities/sno_tourbieres_data/ ).     

Sediment flux-driven channel geometry adjustment of bedrock and mixed gravel–bedrock rivers

Sediment supply (Q_s) is often overlooked in modelling studies of landscape evolution, despite sediment playing a key role in the physical processes that drive erosion and sedimentation in river channels. Here, we show the direct impact of the supply of coarse-grained, hard sediment on the geometry of bedrock channels from the Rangitikei River, New Zealand. Channels receiving a coarse bedload sediment supply are systematically (up to an order of magnitude) wider than channels with no bedload sediment input for a given discharge. We also present physical model experiments of a bedrock river channel with a fixed water discharge (1.5 l min⁻¹) under different Q_s (between 0 and 20 g l⁻¹) that allow the quantification of the role of sediment in setting the width and slope of channels and the distribution of shear stress within channels. The addition of bedload sediment increases the width, slope and width-to-depth ratio of the channels, and increasing sediment loads promote emerging complexity in channel morphology and shear stress distributions. Channels with low Q_s are characterized by simple in-channel morphologies with a uniform distribution of shear stress within the channel while channels with high Q_s are characterized by dynamic channels with multiple active threads and a non-uniform distribution of shear stress. We compare bedrock channel geometries from the Rangitikei and the experiments to alluvial channels and demonstrate that the behaviour is similar, with a transition from single-thread and uniform channels to multiple threads occurring when bedload sediment is present. In the experimental bedrock channels, this threshold Q_s is when the input sediment supply exceeds the transport capacity of the channel. Caution is required when using the channel geometry to reconstruct past environmental conditions or to invert for tectonic uplift rates, because multiple configurations of channel geometry can exist for a given discharge, solely due to input Q_s. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

First Multi‐Isotopic (Pb‐Nd‐Sr‐Zn‐Cu‐Fe) Characterisation of Dust Reference Materials (ATD and BCR‐723): A Multi‐Column Chromatographic Method Optimised to Trace Mineral and Anthropogenic Dust Sources

Atmospheric dust is an integral component of the Earth system with major implications for the climate, biosphere and public health. In this context, identifying and quantifying the provenance and the processes generating the various types of dust found in the atmosphere is paramount. Isotopic signatures of Pb, Nd, Sr, Zn, Cu and Fe are commonly used as sensitive geochemical tracers. However, their combined use is limited by the lack of (a) a dedicated chromatographic protocol to separate the six elements of interest for low‐mass samples and (b) specific reference materials for dust. Indeed, our work shows that USGS rock reference materials BHVO‐2, AGV‐2 and G‐2 are not applicable as substitute reference materials for dust. We characterised the isotopic signatures of these six elements in dust reference materials ATD and BCR‐723, representatives of natural and urban environments, respectively. To achieve this, we developed a specific procedure for dust, applicable in the 4–25 mg mass range, to separate the six elements using a multi‐column ion‐exchange chromatographic method and MC‐ICP‐MS measurements.     

Present limitations of accurate satellite Doppler positioning for tectonics. An example: Djibouti

One of the possibilities of the Doppler positioning from satellite is to provide geodetic measurements continuous in time without the need for reference stations. If measurements of sufficient accuracy can be achieved they may be used to study local surface displacements in relation to tectonic activity. A Doppler receiver of the MEDOC network is located near Djibouti in the Ghoubhat-Asal rift region which corresponds to the accreting plate boundary between the Arabian and African plates. In November 1978, a seismic and volcanic crisis occured in this area. Surface geodetic measurements and levellings performed in 1973 and 1978–79, just after the crisis, reveal a 60–80 cm sinking of the graben floor and a lateral extension of about 2 meters. Here we analyse Doppler measurements for the period January 1977 to November 1980. Point positions are computed for 7 to 10 day intervals using a precise ephemeris, and a moving window analysis is applied to the data. An apparent 2 meter uplift preceding the November 1978 seismic crisis is detected at Djibouti, whereas no similar phenomenon is observed at the two closest stations, Pretoria and Uccle-Brussels. However, field observations rule out a tectonic origin for this uplift. In Djibouti, the correlation between the apparent vertical station position and the electron density in the ionospheric F-layer reveals that a bias may be induced by the third order term of the ionospheric refractive index not previously taken into account, or more probably by the ray curvature through the ionosphere. This bias is particularly strong for our data set, from a station located close to the magnetic equator, and related to a period of rapid increase in the solar activity. Although our analysis fails to detect any tectonic displacement related to the rift seismic activity, it shows that similar tectonic studies by the Doppler method will be possible once the residual ionospheric errors are removed, for example by use of higher radio frequencies.     

Long-term soil moisture content estimation using satellite and climate data in agricultural area of Mongolia

The purpose of this study is to estimate long-term SMC and find its relation with soil moisture (SM) of climate station in different depths and NDVI for the growing season. The study area is located in agricultural regions in the North of Mongolia. The Pearson’s correlation methodology was used in this study. We used MODIS and SPOT satellite data and 14 years data for precipitation, temperature and SMC of 38 climate stations. The estimated SMC from this methodology were compared with SM from climate data and NDVI. The estimated SMC was compared with SM of climate stations at a 10-cm depth (r² = 0.58) and at a 50-cm depth (r² = 0.38), respectively. From the analysis, it can be seen that the previous month’s SMC affects vegetation growth of the following month, especially from May to August. The methodology can be an advantageous indicator for taking further environmental analysis in the region.     

A set-membership approach for high integrity height-aided satellite positioning

A Robust Set-Inversion via Interval Analysis method in a bounded-error framework is used to compute three-dimensional location zones in real time, at a given confidence level. This approach differs significantly from the usual Gaussian error model paradigm, since the satellite positions and the pseudorange measurements are represented by intervals encompassing the true value with a particular level of confidence. The method computes a location zone recursively, using contractions and bisections of an arbitrarily large initial location box. Such an approach can also handle an arbitrary number of erroneous measurements using a q-relaxed solver and allows the integration of geographic and cartographic information such as digital elevation models or three-dimensional maps. With enough data redundancy, inconsistent measurements can be detected and even rejected. The integrity risk of the location zone comes only from the measurement bounds settings, since the solver is guaranteed. A method for setting these bounds for a particular location zone confidence level is proposed. An experimental validation using real L1 code measurements and a digital elevation model is also reported in order to illustrate the performance of the method on real data.     

A mass‐balance approach to estimate in‐stream processes in a large river

A mass‐balance approach was used to estimate in‐stream processes related to inorganic nitrogen species (NH₄⁺, NO₂^? and NO₃^?) in a large river characterized by highly variable hydrological conditions, the Garonne River (south‐west France). Studies were conducted in two consecutive reaches of 30 km located downstream of the Toulouse agglomeration (population 760 000, seventh order), impacted by modification of discharge regime and high nitrogen concentrations. The mass‐balance was calculated by two methods: the first is based on a variable residence time (VRT) simulated by a one‐dimensional (1‐D) hydraulic model; the second is a based on a calculation using constant residence time (CRT) evaluated according to hydrographic peaks. In the context of the study, removal of dissolved inorganic nitrogen (DIN) for a reach of 30 km is underestimated by 11% with the CRT method. In sub‐reaches, the discrepancy between the two methods led to a 50% overestimation of DIN removal in the upper reach (13 km) and a 43% underestimation in the lower reach (17 km) using the CRT method. The study highlights the importance of residence time determination when using modelling approaches in the assessment of whole stream processes in short‐duration mass‐balance for a large river under variable hydrological conditions. Copyright © 2007 John Wiley & Sons, Ltd.