Science-based and stakeholder-driven marine protected area network planning: A successful case study from north central California

The planning process for California's Marine Life Protection Act in north central California represents a case study in the design of a regional component of a statewide network of marine protected areas (MPAs) for improved ecosystem protection. We describe enabling factors, such as a legislative mandate, political will, and adequate capacity and funding that fostered a successful planning process. We identify strategic principles that guided the design of a transparent public planning process that delivered regional MPA network proposals, which both met science guidelines and achieved a high level of support among stakeholders. We also describe key decision support elements (spatial data, planning tools, and scientific evaluation) that were essential for designing, evaluating, and refining alternative MPA network proposals and for informing decision-makers.     

Influence of aquifer properties and the spatial and temporal distribution of recharge and abstraction on sustainable yields in semi‐arid regions

This paper aims to contribute to understanding the importance of four factors on the determination of sustainable yields: (i) aquifer properties; (ii) temporal distribution of recharge; (iii) temporal distribution of groundwater pumping; and (iv) spatial distribution of pumping wells. It is important to comprehend how the present‐day and future vulnerability of groundwater systems to pumping activities depend on these critical factors and what the risks are of considering sustainable yield as a fixed percentage of mean annual recharge (MAR). A numerical model of the Querença–Silves aquifer in Portugal is used to develop hypothetical scenarios with which these factors are studied. Results demonstrate the aquifer properties, particularly the storage coefficient, have an important role in determining the resilience of an aquifer and therefore to which degree it is dependent on the spatial and temporal distribution of abstraction and recharge, as well as the occurrence of extreme events. Sustainable yields are determined for the developed scenarios based on specific criteria rather than a fraction of MAR. Under simplified current recharge and abstraction conditions, the sustainable yield was determined at approximately 73% of MAR or 76 million m³. When considering a concentration of rainfall in time, as predicted by climate scenarios for the region, sustainable yield could drop to ca 70% of MAR. However, a more even distribution of pumping volumes throughout the year could increase this value. The location of the pumping wells is seen to affect the distribution of hydraulic heads in the aquifer, albeit without significant changes in sustainable yield. Copyright © 2011 John Wiley & Sons, Ltd.     

Ground-based measurements of the methane distribution on Titan

Using spectra taken with NIRSPEC (Near Infrared Spectrometer) and adaptive optics on the Keck II telescope, we resolved the latitudinal variation of the 3ν₂ band of CH₃D at 1.56 μm. As CH₃D is less abundant than CH₄ by a factor of 50±10×10^-5, these CH₃D lines do not saturate in Titan’s atmosphere, and are well characterized by laboratory measurements. Thus they do not suffer from the large uncertainties of the CH₄ lines that are weak enough to be unsaturated in Titan. Our measurements of the methane abundance are confined to the latitude range of 32°S-18°N and longitudes sampled by a 0.04″ slit centered at ∼195°W. The methane abundance below 10 km is constant to within 20% in the tropical atmosphere sampled by our observations, consistent with the low surface insolation and lack of surface methane [Griffith, C.A., McKay, C.P., Ferri, F., 2008. Astrophys. J. 687, L41-L44].     

Geo-environmental mapping using physiographic analysis: constraints on the evaluation of land instability and groundwater pollution hazards in the Metropolitan District of Campinas,Brazil

Geo-environmental terrain assessments and territorial zoning are useful tools for the formulation and implementation of environmental management instruments (including policy-making, planning, and enforcement of statutory regulations). They usually involve a set of procedures and techniques for delimitation, characterisation and classification of terrain units. However, terrain assessments and zoning exercises are often costly and time-consuming, particularly when encompassing large areas, which in many cases prevent local agencies in developing countries from properly benefiting from such assessments. In the present paper, a low-cost technique based on the analysis of texture of satellite imagery was used for delimitation of terrain units. The delimited units were further analysed in two test areas situated in Southeast Brazil to provide estimates of land instability and the vulnerability of groundwater to pollution hazards. The implementation incorporated procedures for inferring the influences and potential implications of tectonic fractures and other discontinuities on ground behaviour and local groundwater flow. Terrain attributes such as degree of fracturing, bedrock lithology and weathered materials were explored as indicators of ground properties. The paper also discusses constraints on- and limitations of- the approaches taken.     

Particulate matter geochemistry of a highly industrialized region in the Caribbean:Basis for future toxicological studies

Air pollution has become an important issue,especially in Caribbean urban areas,and,particulate matter(PM)emitted by different natural and anthropogenic sources causes environmental and health issues.In this work,we studied the concentrations of PM₁₀ and PM_2.5 sources in an industrial and port urban area in the Caribbean region of Colombia.PM samples were collected within 48-h periods between April and October 2018 by using a Partisol 2000 i-D sampler.Elemental geochemical characterization was performed by X-ray fluorescence(XRF)analysis.Further,ionic species and black carbon(BC)were quantified by ion chromatography and reflectance spectroscopy,respectively.Using the Positive Matrix Factorization(PMF)receptor model,the contributions of PM sources were quantified.The average concentration of PM₁₀ was 46.6±16.2μg/m³,with high concentrations of Cl and Ca.For PM_2.5,the average concentration was 12.0±3.2μg/m³,and the most abundant components were BC,S,and Cl.The receptor model identified five sources for PM₁₀ and PM_2.5.For both fractions,the contributions of marine sea spray,re-suspended soil,and vehicular traffic were observed.In addition,PM_2.5 included two mixed sources were found to be fuel oil combustion with fertilizer industry emissions,and secondary aerosol sources with building construction emissions.Further,PM₁₀ was found to also include building construction emissions with re-suspended soil,and metallurgical industry emissions.These obtained geochemical atmospheric results are important for the implementation of strategies for the continuous improvement of the air quality of the Caribbean region.     

A 14-year monthly climatology and trend in the 35–65 km altitude range from Rayleigh Lidar temperature measurements at a low latitude station

A sodium resonance lidar at 589 nm has been operated in São José dos Campos, Brazil (23°S, 46°W) since 1972 mainly for studies related to the origin, chemistry and dynamics of the mesospheric sodium layer. Beginning in 1993, the improved laser capability has also enabled the processing of the Rayleigh signal from which the temperatures from 35 to 65 km are retrieved on a nightly mean basis. We used these nightly profiles to determine the monthly temperature profiles from 1993 to 2006. The mean temperature characteristics for each year and for the whole period are obtained. Seasonal thermal amplitude is small (6 K peak to peak at 40 and 60 km). Compared with the MSISE-90 model, a large difference is noted, with temperature lower than the model below the stratopause and higher above. Also the seasonal variation has a large difference with better agreement occurring around local winter, but with temperatures higher by 8–10 K at the equinoxes. The semiannual component is dominant over the annual at all altitudes. Linear trends with decreasing temperature of 1.09, 2.29 and 1.42 K/decade are observed at 40, 50 and 60 km, respectively.     

Assessment of the dynamic response of unreinforced masonry structures using a macroelement modeling approach

The seismic performance of unreinforced masonry structures is strongly associated with the interaction between in‐plane and out‐of‐plane mechanisms. The seismic response of these structures has been thoroughly investigated by means of experimental testing, analytical procedures, and computational approaches. Within the framework of the numerical simulations, models based on the finite element method provide a good prediction of the seismic performance of unreinforced masonry structures. However, they usually require a high computational cost and advanced user expertise to define appropriate mechanical properties and to interpret the numerical results. Because of these limitations, simplified models for practical applications have been developed during the last decades. Despite this, a great number of these models focus mostly on the evaluation of the in‐plane response, assuming box (or integral) behavior of the structure. In this paper, a simplified macroelement modeling approach is used to simulate the seismic response of 2 masonry prototypes taking into consideration the combined in‐plane and out‐of‐plane action. The numerical investigations were performed in the static and dynamic fields by using pushover analyses and nonlinear dynamic analyses respectively. The latter is a novel implementation of a model previously developed for static analysis. The results obtained from this study are in good agreement with those provided by a detailed nonlinear continuum FE approach, demonstrating the applicability of this macroelement model with a significant reduction of the computational cost.     

Wind-induced subduction at the South Atlantic subtropical front

The South Atlantic Subtropical Front, associated with the eastward-flowing South Atlantic Current, separates the colder, nutrient-rich waters of the subpolar gyre from the warmer, nutrient-poor waters of the subtropical gyre. Perturbations to the quasi-geostrophic, eastward flow generate meanders and filaments which induce cross-frontal exchange of water properties. Down-front winds transport denser waters from the South over warm waters from the North, inducing convective instability and subduction. Such processes occur over spatial scales of the order of 1 km and thus require high horizontal spatial resolution. In this modeling study, a high-resolution (4 km) regional grid is embedded in a basin-wide configuration (12 km) of the South Atlantic Ocean in order to test the importance of submesoscale processes in water mass subduction along the subtropical front. Stronger and more numerous eddies obtained in the high-resolution run yield more intense zonal jets along the frontal zone. Such stronger jets are more susceptible to instabilities, frontogenesis, and the generation of submesoscale meanders and filaments with \(\mathcal {O}(1)\) Rossby number. As a consequence, vertical velocities larger than 100 md ¹ are obtained in the high-resolution run, one order of magnitude larger than in the low-resolution run. Wind-driven subduction occurs along the frontal region, associated with negative Ertel potential vorticity in the surface layer. Such processes are not observed in the low-resolution run. A passive tracer experiment shows that waters with density characteristics similar to subtropical mode waters are preferentially subducted along the frontal region. The wind-driven buoyancy flux is shown to be much larger than thermal or haline fluxes during the wintertime, which highlights the importance of the frictional component in extracting PV from the surface ocean and inducing subduction, a process that has been overlooked in subtropical mode water formation in the region.     

Planning the Colca Canyon and the Valley of the Volcanoes National Park in South Peru

The economic development of the Rio Colca region and related infrastructure endangers the environment of the deepest canyon worldwide. The unique values of the Colca Valley and Canyon and its tributary Valley of the Volcanoes are summarised. They include a magnificent, deep section of the orogenic belt 100 km long, different geological formations, active faults, a variety of fold structures, young volcanoes, hot springs, geysers, several ecological zones and the largest condor habitat in the Andes. Based on the observed land use, development and regional planning, the threats and conflict areas are outlined. Studies performed by the Polish Scientific Expedition to Peru since 2003 add greatly to the knowledge of geology, landscape and pioneering biota development of the area and its importance to the world heritage of nature. They are aimed to give scientific background to the project of the Canyon Colca and Valley of the Volcanoes National Park. The article gives the proposed limits of the park and its buffer zones, categories of protection zones compatible with the SINANPE system of Peru and suggestions on tourist accessibility. The strict protection zone should cover the most inaccessible part of the area where human economic activity practically does not exist. Traditional farming and animal husbandry, wildlife, cultural tourism and some forms of adventure tourism will be allowed in the zone of special usage. The new park would strengthen the relatively poor system of the protected areas in the Arequipa Department, increase tourist attractiveness and determine constraints for sustained regional development. The expected actions of the park authority and local governments are specified.