A Completely 3D Model for the Simulation of Mechanized Tunnel Excavation

For long deep tunnels as currently under construction through the Alps, mechanized excavation using tunnel boring machines (TBMs) contributes significantly to savings in construction time and costs. Questions are, however, posed due to the severe ground conditions which are in cases anticipated or encountered along the main tunnel alignment. A major geological hazard is the squeezing of weak rocks, but also brittle failure can represent a significant problem. For the design of mechanized tunnelling in such conditions, the complex interaction between the rock mass, the tunnel machine, its system components, and the tunnel support need to be analysed in detail and this can be carried out by three-dimensional (3D) models including all these components. However, the state-of-the-art shows that very few fully 3D models for mechanical deep tunnel excavation in rock have been developed so far. A completely three-dimensional simulator of mechanised tunnel excavation is presented in this paper. The TBM of reference is a technologically advanced double shield TBM designed to cope with both conditions. Design analyses with reference to spalling hazard along the Brenner and squeezing along the Lyon–Turin Base Tunnel are discussed.     

Iron oxidation state in the Fe‐rich layer and silica matrix of Libyan Desert Glass: A high‐resolution XANES study

Abstract— Libyan Desert Glass (LDG) is an enigmatic type of glass that occurs in western Egypt in the Libyan Desert. Fairly convincing evidence exists to show that it formed by impact, although the source crater is currently unknown. Some rare samples present dark‐colored streaks with variable amounts of Fe, and they are supposed to contain a meteoritic component. We have studied the iron local environment in an LDG sample by means of Fe K‐edge highresolution X‐ray absorption near edge structure (XANES) spectroscopy to obtain quantitative data on the Fe oxidation state and coordination number in both the Fe‐poor matrix and Fe‐rich layers. The pre‐edge peak of the high‐resolution XANES spectra of the sample studied displays small but reproducible variations between Fe‐poor matrix and Fe‐rich layers, which is indicative of significant changes in the Fe oxidation state and coordination number. Comparison with previously obtained data for a very low‐Fe sample shows that, while iron is virtually all trivalent and in tetrahedral coordination (^[4]Fe³⁺) in the low‐Fe sample, the sample containing the Fe‐rich layers display a mixture of tetra‐coordinated trivalent iron (^[4]Fe³⁺) and penta‐coordinated divalent iron (^[5]Fe²⁺), with the Fe in the Fe‐rich layer being more reduced than the matrix. From these data, we conclude the following: a) the significant differences in the Fe oxidation state between LDG and tektites, together with the wide intra‐sample variations in the Fe‐oxidation state, confirm that LDG is an impact glass and not a tektite‐like glass; b) the higher Fe content, coupled with the more reduced state of the Fe, in the Fe‐rich layers suggests that some or most of the Fe in these layers may be directly derived from the meteoritic projectile and that it is not of terrestrial origin.     

Numerical reconstruction of trajectory of small-size surface drifter in the Mediterranean sea

In this study, we addressed the effects of wind-induced drift on Lagrangian trajectories of surface sea objects using high-resolution ocean forecast and atmospheric data. Application of stochastic Leeway model for prediction of trajectories drift was considered for the numerical reconstruction of the Elba accident that occurred during the period 21.06.2009–22.06.2009: a person on an inflatable raft was lost in the vicinity of the Elba Island coast; from the initial position, the person on a raft drifted southwards in the open sea and later he was found on a partially deflated raft during rescue operation. For geophysical forcing, we used high-resolution currents from the Mediterranean Forecasting System and atmospheric wind from the European Centre for Medium-Range Weather Forecasts. To investigate the effect of wind on trajectory behavior, numerical simulations were performed using different categories of drifter-like particles similar to a person on an inflatable raft. An algorithm of spatial clustering was used to differentiate the most probable search areas with a high density of particles. Our results showed that the simulation scenarios using particles with characteristics of draft-limited sea drifters provided better prediction of an observed trajectory in terms of the probability density of particles.     

Influence of lunar phases,winds and seasonality on the stranding of mesopelagic fish in the Strait of Messina (Central Mediterranean Sea)

The shore stranding of mesopelagic fauna is a recurrent phenomenon in the Strait of Messina (Central Mediterranean Sea). The aim of this paper is to test the influence of lunar phases, winds and seasons upon the frequency of occurrence of strandings of mesopelagic fish. Species abundance in relation to these factors was quantified for the first time. Specimens were collected stranded on the shore along the Sicilian coast of the Strait of Messina between 2008 and 2016. Overall 32 species belonging to seven families (Gonostomatidae, Microstomatidae, Myctophidae, Paralepididae, Phosichthyidae, Sternoptychidae, Stomiidae) were found stranded. Myctophidae was the family including the highest number of species (16), whereas Gonostomatidae was the most abundant in terms of total number of individuals (47.2%), mainly thanks to the species Cyclothone braueri. The moon, which influences the strength of currents (highest during full and new moon phases) and irradiance (higher in some lunar phases, such as the full moon), affected the abundance of stranded mesopelagic fish in the study area. The highest number of stranding events was recorded during the new moon: 34.6% of the total relative abundance of stranded mesopelagic fish. Wind blowing from the sea towards the coastline (southeasterly and easterly winds) created the best conditions for strandings. The highest abundance of stranded specimens was recorded during the winter season.     

Multiridge Euler deconvolution

Potential field interpretation can be carried out using multiscale methods. This class of methods analyses a multiscale data set, which is built by upward continuation of the original data to a number of altitudes conveniently chosen. Euler deconvolution can be cast into this multiscale environment by analysing data along ridges of potential fields, e.g., at those points along lines across scales where the field or its horizontal or vertical derivative respectively is zero. Previous work has shown that Euler equations are notably simplified along any of these ridges. Since a given anomaly may generate one or more ridges we describe in this paper how Euler deconvolution may be used to jointly invert data along all of them, so performing a multiridge Euler deconvolution. The method enjoys the stable and high‐resolution properties of multiscale methods, due to the composite upward continuation/vertical differentiation filter used. Such a physically‐based field transformation can have a positive effect on reducing both high‐wavenumber noise and interference or regional field effects. Multiridge Euler deconvolution can also be applied to the modulus of an analytic signal, gravity/magnetic gradient tensor components or Hilbert transform components. The advantages of using multiridge Euler deconvolution compared to single ridge Euler deconvolution include improved solution clustering, increased number of solutions, improvement of accuracy of the results obtainable from some types of ridges and greater ease in the selection of ridges to invert. The multiscale approach is particularly well suited to deal with non‐ideal sources. In these cases, our strategy is to find the optimal combination of upward continuation altitude range and data differentiation order, such that the field could be sensed as approximately homogeneous and then characterized by a structural index close to an integer value. This allows us to estimate depths related to the top or the centre of the structure.     

Study of Shallow Low-Enthalpy Geothermal Resources Using Integrated Geophysical Methods

The paper is focused on low enthalpy geothermal exploration performed in south Italy and provides an integrated presentation of geological, hydrogeological, and geophysical surveys carried out in the area of municipality of Lecce. Geological and hydrogeological models were performed using the stratigraphical data from 51 wells. A ground-water flow (direction and velocity) model was obtained. Using the same wells data, the ground-water annual temperature was modeled. Furthermore, the ground surface temperature records from ten meteorological stations were studied. This allowed us to obtain a model related to the variations of the temperature at different depths in the subsoil. Integrated geophysical surveys were carried out in order to explore the low-enthalpy geothermal fluids and to evaluate the results of the model. Electrical resistivity tomography (ERT) and self-potential (SP) methods were used. The results obtained upon integrating the geophysical data with the models show a low-enthalpy geothermal resource constituted by a shallow ground-water system.     

Assessment of water vapor retrievals from a GPS receiver network

We present an assessment of a GPS receiver operational network to produce accurate integrated precipitable water vapour (IPWV) during a two-week field experiment carried out in Central Italy around the city of Rome, where different instruments were operative. This experimental activity provided an excellent opportunity to compare the GPS products with independent measurements provided by ground-based and space-based sensors and to evaluate their quality in terms of absolute accuracy of IPWV, analyzing also the spatial scale of GPS estimates. For instance, the assimilation into Numerical Weather Prediction models of IPWV provided by a GPS network or its exploitation in space geodesy applications to correct tropospheric effects requires an accuracy in the order of 0.1 cm to be ascribed to IPWV observations. In this work, we assessed that the accuracy for GPS IPWV estimates is 0.07 cm. Moreover, this experiment has pointed out strengths and limitations of an operational network for the water vapor estimation, such as a proper receiver distribution to achieve the desired spatial resolution and a coverage of GPS stations in both flat and mountains regions.     

Weakening climatic signal since mid-20th century in European larch tree-ring chronologies at different altitudes from the Adamello-Presanella Massif (Italian Alps)

Tree rings from temperature-limited environments are highly sensitive climate proxies, widely used to reconstruct past climate parameters for periods prior to the availability of instrumental data and to analyse the effect of recent global warming on tree growth. An analysis of the climatic signal in five high-elevation tree-ring width chronologies of European larch (Larix decidua Mill.) from the tops of five different glacial valleys in the Italian Central Alps revealed that they contain a strong summer-temperature signal and that tree-ring growth is especially influenced by June temperatures. However, a moving correlation function analysis revealed a recent loss of the June temperature signal in the tree-ring chronologies. This signal reduction primarily involves the two lowest-altitude chronologies. It is probable that the observed increasing importance of late-summer temperature for tree-ring growth over the past 50 yr is an effect of the lengthening growing season and of the variations in the climate/tree-ring relationship over time. All the chronologies considered, especially those at the highest altitudes, show an increasing negative influence of June precipitation on tree-ring growth. The climatic signal recorded in tree-ring chronologies from the Italian Central Alps varies over time and is also differentially influenced by climatic parameters according to site elevation.     

The influence of recultivation technique and seed mixture on erosion stability after restoration in mountain environment

Control of erosion, and all of its after effects, from increased surface drainage and erosion to the formation of karst, is one of the essential problems when undertaking recultivation following necessary interventions in the sub-alpine and alpine vegetation stage (high zones). Average slope inclinations of 30–45% in the vicinity of ski runs, and far above in areas of natural erosion and avalanche zones, make restoration processes with sufficient erosion protection the prerequisite for success. Only a sufficient vegetation development of more than 70% ground cover stabilises the topsoil in the long term and reduces soil erosion to an acceptable degree. From 1999 to 2002, an international EU project with the participation of research groups and private firms from Austria, Italy and Germany was carried out under the direction of the Agricultural Research and Education Centre Raumberg-Gumpenstein (AREC) on five different Alpine sites at altitudes from 1,245 to 2,350 m above sea level. The aim of the work was the formulation of practice-relevant requirements for recultivation following intervention in high zones, especially following constructional measures in the vicinity of ski runs and lifts, torrent- and avalanche barriers. In a statistical comparison, the relationship between restoration techniques, seed mixtures of differing ecological value and vegetation cover was observed. The influence of application technique on erosion processes after restoration was obvious for the first two vegetation periods. Only with the additional use of mulch covers could increase surface drainage and noticeable soil loss be avoided. At high altitudes, the choice of seed mixture, irrespective of whether rapid or slow growing and independent of the extent of accompanying fertilisation, had no significance in the first two vegetation periods following sowing. In the following growing seasons, however, higher cover values were obtained with site-specific seed mixtures at three of the five experimental sites. While few species of the commercial seed mixture showed satisfactory persistency, most of the grasses and in particular the alpine leguminosae of site-specific seed mixtures increased their share during the observation period. In the long-term, sufficient protection against erosion is only guaranteed by the use of stable, enduring and ecologically adapted species.