UNESCO World Heritage sites in Italy affected by geological problems, specifically landslide and flood hazard

A National Research Council, Research Institute for Hydrogeological Protection (IRPI) study on Italian monuments included in the UNESCO World Heritage List has revealed that many are affected by geological, geomorphological, and engineering geological problems. These monuments are static entities set in an environment that often manifests highly dynamic processes. As part of the efforts to protect sites of cultural and natural heritage, this study has applied a preliminary and empirical Geographical Information System-based method developed to characterize the environmental hazards at the sites where the monuments are located. Because the study of hydrogeological degradation falls within the province of IRPI, this hazard zoning focuses on river and mountain slope dynamics specifically concerning landslides and floods.     

Quantitative risk analysis for hyperconcentrated flows in Nocera Inferiore (southern Italy)

This paper reports on a quantitative estimation of the risk to residents at the toe of Mount Albino, a carbonatic relief covered by shallow deposits of pyroclastic soils, which threatens the municipality of Nocera Inferiore (southern Italy). The quantitative risk analysis (QRA) focuses on one type of mass transport phenomena typical for the context at hand, namely the hyperconcentrated flows. The methodological approach includes three main steps: hazard analysis, consequence analysis and risk estimation. Based on historical incident data, the hazard analysis makes use of a high-resolution digital terrain model and advanced models that incorporate relevant geological and geotechnical input data collected via in situ investigations and laboratory tests. The consequence analysis takes into account information on the exposed persons (age, gender) and their vulnerability. The estimated risk to life is calculated at the individual level (risk to the average and most exposed person). The reported procedure is one of the first QRA’s applications to instabilities which potentially affect natural slopes in Italy, and it was successfully used as technical basis for a public participatory process in Nocera Inferiore, designed and developed to support decisions about risk mitigation measures.

     

Petrology of Karoo volcanic rocks in the southern Lebombo monocline, Mozambique

The Karoo volcanic sequence in the southern Lebombo monocline in Mozambique contains different silicic units in the form of pyroclastic rocks, and two different basalt types. The silicic units in the lower part of the Lebombo sequence are formed by a lower unit of dacites and rhyolites (67–80 wt.% SiO₂) with high Ba (990–2500 ppm), Zr (800–1100 ppm) and Y (130–240 ppm), which are part of the Jozini–Mbuluzi Formation, followed by a second unit, interlayered with the Movene basalts, of high-SiO₂ rhyolites (76–78 wt.%; the Sica Beds Formation), with low Sr (19–54 ppm), Zr (340–480 ppm) and Ba (330–850 ppm) plus rare quartz-trachytes (64–66 wt.% SiO₂), with high Nb and Rb contents (240–250 and 370–381 ppm, respectively), and relatively low Zr (450–460 ppm). The mafic rocks found at the top of the sequence are basalts and ferrobasalts belonging to the Movene Formation. The basalts have roughly flat mantle-normalized incompatible element patterns, with abundances of the most incompatible elements not higher than 25 times primitive mantle. The ferrobasalt has TiO₂  4.7 wt.%, Fe₂O_3t = 16 wt.%, and high Y (100 ppm), Zr (420 ppm) and Ba (1000 ppm). The Movene basalts have initial (at 180 Ma) ⁸⁷Sr/⁸⁶Sr = 0.7052–0.7054 and ¹⁴³Nd/¹⁴⁴Nd = 0.51232, and the Movene ferrobasalt has even lower ⁸⁷Sr/⁸⁶Sr (0.70377) and higher ¹⁴³Nd/¹⁴⁴Nd (0.51259). The silicic rocks show a modest range of initial Sr-(⁸⁷Sr/⁸⁶Sr = 0.70470–0.70648) and Nd-(¹⁴³Nd/¹⁴⁴Nd = 0.51223–0.51243) isotope ratios. The less evolved dacites could have been formed after crystal fractionation of oxide-rich gabbroic cumulates from mafic parental magmas, whereas the most silica-rich rhyolites could have been formed after fractional crystallization of feldspars, pyroxenes, oxides, zircon and apatite from a parental dacite magma. The composition of the Movene basalts imply different feeding systems from those of the underlying Sabie River basalts.     

Fault‐controlled dolomite bodies as palaeotectonic indicators and geofluid reservoirs: New insights from Gargano Promontory outcrops

The Upper Jurassic to Lower Cretaceous platform‐slope to basinal carbonate strata cropping out in Gargano Promontory (southern Italy) are partly dolomitized. Fieldwork and laboratory analyses (petrographic, petrophysical and geochemical) allowed the characterization of the dolomite bodies with respect to their distribution within the carbonate succession, their dimensions, geometries, textural variability, chemical stability, age, porosity, genetic mechanisms and relation with tectonics. The dolomite bodies range from metres to kilometres in size, are fault‐related and fracture‐related, and probably formed during the Early Cretaceous at <500 m burial depths and temperatures <50°C. The proposed dolomitization model relies on mobilization of Early Cretaceous seawater that flowed, downward and then upward, along faults and fractures and was modified in its isotopic composition moving through Triassic and Jurassic strata that underlie the studied dolomitized succession. Despite the numerous cases reported in literature, this study demonstrates that hydrothermal and/or high‐temperature fluids are not necessarily required for fault‐controlled dolomitization. Distribution and geometries of dolomite bodies can be used for palaeotectonic reconstructions, as they partly record the characteristics (size, attitude and kinematics) of the palaeo‐faults, even if not preserved, that controlled dolomitization. In Gargano Promontory, dolomites record Early Cretaceous palaeo‐faults from metres to kilometres long, striking north‐west/south‐east to east/west and characterized by normal to strike‐slip kinematics. Dolomitization increases the matrix porosity by up to 7% and, therefore, can improve the geofluid storage capacity of tight, platform‐slope to basinal limestones. The results have a great significance for characterization of geofluid (for example, hydrocarbons) reservoirs hosted in similar dolomitized carbonate successions. Distribution, size and shapes of reservoir rocks (i.e. dolomite bodies) could be broadly predictable if the characteristics of the palaeo‐fault system present at the time of dolomitization are known.     

Natural and anthropogenic forcing of Holocene lake ecosystem development at Lake Uddelermeer (The Netherlands)

Lake Uddelermeer (The Netherlands) is characterized by turbid conditions and annual blooms of toxic cyanobacteria, which are supposed to be the result of increased agricultural activity in the twentieth century AD. We applied a combination of classic palaeoecological proxies and novel geochemical proxies to the Holocene sediment record of Lake Uddelermeer (The Netherlands) in order to reconstruct the natural variability of the lake ecosystem and to identify the drivers of the change to the turbid conditions that currently characterize this lake. We show that the lake ecosystem was characterized by a mix of aquatic macrophytes and abundant phytoplankton between 11,500 and 6000 cal year BP. A transition to a lake ecosystem with clear-water conditions and relatively high abundances of ‘isoetids’ coincides with the first signs of human impact on the landscape around Lake Uddelermeer during the Early Neolithic (ca. 6000 cal year BP). An abrupt and dramatic ecosystem shift can be seen at ca. 1030 cal year BP when increases in the abundance of algal microfossils and concentrations of sedimentary pigments indicate a transition to a turbid phytoplankton-dominated state. Finally, a strong increase in concentrations of plant and faecal biomarkers is observed around 1950 AD. Canonical Correspondence Analysis suggests that reconstructed lake ecosystem changes are best explained by environmental drivers that show long-term gradual changes (sediment age, water depth). These combined results document the long-term anthropogenic impact on the ecosystem of Lake Uddelermeer and provide evidence for pre-Industrial Era signs of eutrophication.     

Surface Miners: Evaluation of the Production Rate and Cutting Performance Based on Rock Properties and Specific Energy

The purpose of this research was to evaluate the production rate (PR) and cutting performance of surface miners (SM) based on rock properties and specific energy (SE). We use data from equipment manufacturers and experimental data in this study and propose a new method and equations to determine both the PR and the cutting speed of SM. The unconfined compressive strength (UCS) of the rock, its abrasivity, and the machine’s engine power are the three most important factors influencing the PR. Moreover, the cutting depth, UCS, and engine power have a significant impact on the cutting speed. We propose a new method and equations to determine the energy required to cut a volume unit and a surface unit, i.e., specific energy, and establish the relationship between SE, UCS, and PR. The results of this study can be used by surface miner operators to evaluate the applicability of the machines to a specific mine site.     

The variety of landslide forms in Slovenia and its immediate NW surroundings

The Post-Forum Study Tour following the 4th World Landslide Forum 2017 in Ljubljana (Slovenia) focuses on the variety of landslide forms in Slovenia and its immediate NW surroundings, and the best-known examples of devastating landslides induced by rainfall or earthquakes. They differ in complexity of the both surrounding area and of the particular geological, structural and geotechnical features. Many of the landslides of the Study Tour are characterized by huge volumes and high velocity at the time of activation or development in the debris flow. In addition, to the damage to buildings, the lives of hundreds of people are also endangered; human casualties occur. On the first day, we will observe complex Pleistocene to recent landslides related to the Mesozoic carbonates thrust over folded and tectonically fractured Tertiary siliciclastic flysch in the Vipava Valley (SW Slovenia), serving as the main passage between the Friulian lowland and central Slovenia, and thus also an important corridor connecting Northern Italy to Central Europe. A combination of unfavourable geological conditions and intense short or prolonged rainfall periods leads to the formation of different types of complex landslides, from large-scale deep-seated rotational and translational slides to shallow landslides, slumps and sediment gravity flows in the form of debris or mudflows. The second day of the study tour will be held in the So?a River Valley located in NW Slovenia close to the border with Italy, where the most catastrophic Sto?e landslide in Slovenia recently caused the deaths of seven people, and the nearby Strug landslide, which is a combination of rockfall, landslide and debris flow. The final day of the Post-Forum Study Tour will start in the Valcanale Valley located across the border between Slovenia and Italy, severely affected by a debris flow in August 2003. The flow caused the deaths of two people, damaged 260 buildings; large amounts of deposits blocked the A23 Highway, covering both lanes. In Carinthia (Austria), about 25 km west of Villach, the Dobra?/Dobratsch multiple scarps of prehistoric and historic rockslides will be observed. Dobratsch is a massive mountain ridge with a length of 17 km and a width of 6 km, characterized by steep rocky walls. The 3-day study tour will conclude with a presentation of the Poto?ka planina landslide, a slide whose lower part may eventually generate a debris flow and therefore represents a hazard for the inhabitants and for the infrastructure within or near the village of Koro?ka Bela.     

Aspects of stratospheric long-term changes induced by ozone depletion

The effect of the stratospheric ozone depletion on the thermal and dynamical structure of the middle atmosphere is assessed using two 5-member ensembles of transient GCM simulations; one including linear trends in ozone, the other not, for the 1980–1999 period. Simulated temperatures and observations are in good agreement in terms of mean values, autocorrelations and cross correlations. Annual-mean and seasonal temperature trends have been calculated using the same statistical analysis. Simulations show that ozone trends are responsible for reduced wave activity in the Arctic lower stratosphere in February and March, confirming both the role of dynamics in controlling March temperatures and a recently proposed mechanism whereby Arctic ozone depletion causes the reduction in wave activity entering the lower stratosphere. Changes in wave activity are consistent with an intensification of the polar vortex at the time of ozone depletion and with a weakened Brewer–Dobson circulation: A decrease of the dynamical warming/cooling associated with the descending/ascending branch of the wintertime mean residual circulation at high/low latitudes has been obtained through the analysis of temperature observations (1980–1999). Ozone is responsible of about one third of the decrease of this dynamical cooling at high latitudes. An increase in the residual mean circulation is seen in the observations for the 1965–1980 period.     

An Analysis of Turbulent Heat Fluxes and the Energy Balance During the REFLEX Campaign

Three eddy covariance stations were installed at the Barrax experimental farm during the Land-Atmosphere Exchanges (REFLEX) airborne training and measurement campaign to provide ground truth data of energy balance fluxes and vertical temperature and wind profiles. The energy balance closure ratio (EBR) was 105% for a homogeneous camelina site, 86% at a sparse reforestation site, and 73% for a vineyard. We hypothesize that the lower closure in the last site was related to the limited fetch. Incorporating a vertical gradient of soil thermal properties decreased the RMSE of the energy balance at the camelina site by 16 W m^?2. At the camelina site, eddy covariance estimates of sensible and latent heat fluxes could be reproduced well using mean vertical profiles of wind and temperature, provided that the Monin—Obukhov length is known. Measured surface temperature and sensible heat fluxes suggested high excess resistance for heat (kB^?1 = 17).