Seismic vulnerability of bridges in transport networks subjected to environmental deterioration

This paper investigates the problem of management, maintenance and planning of interventions in transport networks located in seismic zones, in relation to the actual state of degradation of their most vulnerable elements, as bridges. The study consists in two phases: the first phase is concerned with definition of the seismic vulnerability of a typical bridge in the network, through the construction of fragility curves calculated taking into account the corrosion of the reinforcing steel as the main cause of environmental deterioration. Once the fragility curves of the deteriorated bridges are computed, the second phase consists in the analysis of the vulnerability of the transport network in which the bridges are included taking into account the modification of the traffic flows when bridge infrastructures are damaged. The results of this pilot study can be used as a first step for a proper allocation of economic resources in the planning of seismic retrofit interventions to minimize the overall risk and manage the immediate post-earthquake emergency phase and guide rescuers in reaching the affected and critical areas.     

1D and 2D site amplification effects at Tarcento (Friuli,NE Italy), 30 years later

A temporary accelerometer network has been installed in Tarcento (Friuli, NE Italy), a small town heavily hit by the 1976–1977 Friuli earthquake sequence, as a part of an ongoing research project aimed at ground motion simulation and generation of shakemaps in the near-field of an earthquake. The network operated from October 2008 to April 2010 and consisted of three K2 accelerographs with internal Episensor, distributed over a linear array of about 1.5 km length. Tarcento town had been chosen, at the end of the 1970s, as the ideal site for a pilot microzonation study, the first of this kind in Italy, in which a substantial number of field (and laboratory) tests were carried out in order to assess the mechanical properties of local alluvium deposits and their complex (3D) geometrical configuration. The data from the temporary network, illustrated herein, allow for proper verification and review of some of the quantitative predictions formulated in the 1980 study. As argued in the discussion section, we also believe that the data are apt to provide valuable information of more general interest on the complex seismic response of alluvium-filled valleys, and we show therein how the observations can be interpreted in the light of presently available parametric simulation studies and simplified criteria for handling basin amplification effects.     

Hydrodynamic and isotopic investigations for evaluating the mechanisms and amount of groundwater seepage through a rockslide dam

This study addresses the influence of landslide dams on surface water drainage and groundwater flow. In the study area of Scanno Lake and Sagittario River (Central Italy), a limestone rockslide‐avalanche formed a lake, which has an outlet that is occasionally active, showing infiltration into the rockslide dam. Several springs are present at the lake's base and are partly fed by seepage through the rockslide debris. Piezometric surveys, discharge measurements, pumping tests and chemical analyses are tools used to build a conceptual model of the groundwater flow and to evaluate the flow through the rockslide debris. Seasonal water isotopic signatures validate the assumed model, showing a mixing of infiltration recharge and groundwater seepage throughout the rockslide debris. Various recharge areas have been found for springs, pointing out those directly fed by the rockslide debris aquifer. Hypotheses about seasonal groundwater mixing between the regional carbonate aquifer and the rockslide debris aquifer are supported by isotope results. Seasonal changes in groundwater table level due to recharge and surface losses from seasonal outlet have been correlated with isotopic groundwater composition from the rockslide debris aquifer and the downstream springs; this relationship highlights the role of the rockslide dam body on the hydrodynamics of the studied area. Relationships between surface waters and groundwater in the area have been completely understood on the basis of water isotopic fingerprinting, finally obtaining a complete evaluation of groundwater renewable resources and its regimen. Copyright © 2010 John Wiley & Sons, Ltd.     

A multi-hazard regional level impact assessment for Europe combining indicators of climatic and non-climatic change

To better prioritise adaptation strategies to a changing climate that are currently being developed, there is a need for quantitative regional level assessments that are systematic and comparable across multiple weather hazards. This study presents an indicator-based impact assessment framework at NUTS-2 level for the European Union that quantifies potential regional changes in weather-related hazards: heat stress in relation to human health, river flood risk, and forest fire risk. This is done by comparing the current (baseline) situation with two future time periods, 2011–2040 and 2041–2070. The indicator values for the baseline period are validated against observed impact data. For each hazard, the method integrates outcomes of a set of coherent high-resolution regional climate models from the ENSEMBLES project based on the SRES A1B emission scenario, with current and projected non-climatic drivers of risk, such as land use and socio-economic change. An index of regional adaptive capacity has been developed and compared with overall hazard impact in order to identify the potentially most vulnerable regions in Europe. The results show strongest increases in impacts for heat stress, followed by forest fire risk, while for flood risk the sign and magnitude of change vary across regions. A major difference with previous studies is that heat stress risk could increase most in central Europe, which is due to the ageing population there. An overall assessment combining the three hazards shows a clear trend towards increasing impact from climaterelated natural hazards for most parts of Europe, but hotspot regions are found in eastern and southern Europe due to their low adaptive capacities. This spatially explicit assessment can serve as a basis for discussing climate adaptation mainstreaming, and priorities for regional development in the EU.     

Impact of storm runoff from tropical watersheds on coastal water quality and productivity

Storm runoff in the steep watersheds in Hawaii leads to sediment and freshwater pulses to coastal waters that quickly affect nearshore water quality. This is particularly true in semi-enclosed embayments, such as Kaneohe Bay, Oahu, where water has a relatively long residence time compared to more open coastal areas of the islands. In this paper the authors discuss water quality and productivity in Kaneohe Bay after back-to-back rain events in late November and early December 2003, following a particularly dry summer. The short-term biogeochemical response of coastal waters and the ecosystem to runoff and physical forcing was evaluated through a combination of continuous in situ measurements and adaptive synoptic sampling carried out on a variety of temporal and spatial scales.     

Shaking and splashing—A case study of far-field effects of the Mjølnir asteroid impact on depositional environments in the Barents Sea

The Mjølnir impact crater in the Norwegian Barents Sea features among the 20 largest impact craters listed in the Earth Impact Database. The impact is dated to 142 ± 2.6 Ma, corresponding closely to the Jurassic/Cretaceous boundary in the Boreal stratigraphy. Multidisciplinary studies carried out over the last three decades have suggested that the up to 40 km wide crater was created by a 1–3 km diameter impactor colliding with a shallow epicontinental sea, causing regional havoc and a regional ecological crisis that followed in its wake. Only minor evidence for the consequences of the impact for the surrounding depositional basins has been documented so far. This study describes a large submarine slump penetrated by hydrocarbon exploration well 7121/9-1, located in the southern Hammerfest Basin and approximately 350 km away from the impact site. The slump is dated by a black shale drape, which contains characteristic impact-related biotic assemblages and potential ejecta material. This precise dating enables us to associate the slump with large-scale fault movements and footwall collapse along the basin-bounding Troms-Finnmark Fault Complex, which we conclude were caused by shock waves from the Mjølnir impact and the passage of associated tsunami trains. The draping black shale is interpreted to represent significant reworking of material from the contemporary seabed by tsunamis and currents set up by the impact.     

A new insight into land use classification based on aggregated mobile phone data

Land-use classification is essential for urban planning. Urban land-use types can be differentiated either by their physical characteristics (such as reflectivity and texture) or social functions. Remote sensing techniques have been recognized as a vital method for urban land-use classification because of their ability to capture the physical characteristics of land use. Although significant progress has been achieved in remote sensing methods designed for urban land-use classification, most techniques focus on physical characteristics, whereas knowledge of social functions is not adequately used. Owing to the wide usage of mobile phones, the activities of residents, which can be retrieved from the mobile phone data, can be determined in order to indicate the social function of land use. This could bring about the opportunity to derive land-use information from mobile phone data. To verify the application of this new data source to urban land-use classification, we first construct a vector of aggregated mobile phone data to characterize land-use types. This vector is composed of two aspects: the normalized hourly call volume and the total call volume. A semi-supervised fuzzy c-means clustering approach is then applied to infer the land-use types. The method is validated using mobile phone data collected in Singapore. Land use is determined with a detection rate of 58.03%. An analysis of the land-use classification results shows that the detection rate decreases as the heterogeneity of land use increases, and increases as the density of cell phone towers increases.     

Azimut di una geodetica ellissoidica passante per due punti molto lontani fra loro

Riassunto L'Autore presenta un procedimento per la ricerca dell'azimut di una geodetica ellissoidica passante per due punti molto lontani fra loro. Istituisce dapprima una corrispondenza fra la geodetica ed un arco di cerchio massimo, corrispondenza definita con l'imporre uguali coordinate agli estremi dei due archi e la latitudine sferica normale uguale a quella ellissoidica. Sviluppa poi la longitudine ellissoidicaw in funzione di quella sferical, e poichè l fra gli estremi dell'arco di cerchio deve essere uguale a w, ne deduce una equazione per ricavare l'azimut.

---

Summary The Author outlines a procedure to research the azimuth of an ellipsoidal geodesic, which passes through two points far distant from another. A corrispondence is first instituted between the geodesic and a bow of maximum circle; this correspondence may be defined by imposing the same coordinates to the extreme parts of the two bows and the spherical normal latitude equal to the ellipsoidal one. The ellipsoidal longitudew is next developed as a function of the spherical onel and, as l between the extreme parts of the circle bow must equal w, an equation is hereby deduced to find out the azimuth.

     

Late Holocene glacial and periglacial evolution in the upper Orco Valley, northwestern Italian Alps

The sediments present in some areas of the Orco Valley provide indications on climatic variations that occurred during the last 6000 years on the southern slopes of the Alps. In particular, distribution and ages of peat layers help define periods and extent of glacial fluctuation in the last 2200 years. Sampling of soils involved in periglacial processes provided a basis for development of a chronological framework of late Holocene environmental change. The data indicate a trend toward cooler climate in the second half of the Holocene. A strong relationship exists between phases of River Po flooding and expansion/retreat phases of the Swiss glaciers: major glacial advances were coeval with periods of intense flooding of the River Po, whereas the phases of glacial retreat coincided with periods of little flooding of the Po. Only in three cases do relationships between glacier activity and floods show weak correlations; two of the cases relate to the warmest periods in approximately the last 2200 years, while the third is the present period. Paleoclimatic evidence from the study region indicates the relatively warm Roman Period between about 2200 and 1900 cal yr BP appears to better represent modern conditions than does the Medieval Warm Period.     

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.