Applicability of the theory of hollow inclusions for overcoring stress measurements in rock

Summary Whenever solid or hollow inclusions are used as instrumented probes in overcoring techniques, residual stresses remain in the overcored rock sample and in the probes. When using such devices for computing the in-situ stress field components from measured strains or displacements, it is common practice to assume that the overcoring diameter is infinite and that there is a perfect bonding between the rock and the probes. The validity of these assumptions depends on the magnitude of the residual stresses at the rock-probe contact as compared to the tensile and shear strengths of the rock-probe bond material. It also depends on the distribution of residual stresses in the overcored sample.In comparison to previous work, new expressions are proposed in this paper for the residual stresses associated with solid or hollow inclusion type stress probes in anisotropic ground. These expressions are presented in dimensionless form and are used to show that the distribution and magnitude of residual stresses depend on the isotropic-anisotropic rock character, the degree and type of rock anisotropy, the orientation of the rock anisotropy with respect to the hole in which the probes are located and the relative deformability of the rock with respect to the deformability of the material comprising the probes. The conditions that are required for neglecting the overcored sample diameter are also discussed. This is shown for rocks that can be described as isotropic, transversely isotropic and orthotropic materials.     

The geography of tourism in France: definition,scope and themes

Conclusions The substantial body of literature produced in the last two decades bears witness to the marked development of the geography of tourism in France over this period. This research has been strongly influenced by traditional geographic thought and is notable for the logic which underlies it. At the same time much remains to be done, with various avenues for future research being suggested in this paper. French geographers might also look increasingly outwards and to the work of others. By considering new and different methodologies, theories and fields of interest, the conceptual base of the subject might be enlarged and a more systematic approach developed. This need is keenly felt and this opening up is starting to occur, particularly through the exchange of ideas with foreign geographers at meetings of the national or international (IGU) commissions on the geography of tourism.     

Evolution estivale de la turbidité dans le lac de Neuchâtel

Some turbiditic measures carried out by a limnological diffusiometer along with the physico-chemical determinations of the Lake of Neuchatel have permitted to subdivide the water column in 4 distinct layers: the Epilimnium, the Clear Water Layer, the Pelagic Nepheloid Layer and the Benthic Nepheloid Layer.      

The early Cenozoic tectonic history of the southeast Pacific

It is suggested that the hydrothermal vents of the South Pacific Rise produce a beta-governed circulation at mid-depth, and that perhaps the associated plume of excess³He (Lupton and Craig [1]) points westward because of the dynamics of this circulation rather than as a passive tracer.     

A new method for sampling and analyzing volcanic sublimates — application to Merapi volcano, Java

A new method for the sampling of sublimates from high-temperature volcanic gases has been used at Merapi volcano, Java, in 1978. The sublimates were collected on the inner walls of silica tubes introduced into fumarolic vents. Volcanic gases were allowed to move freely through the tubes and as they cooled, a fraction of the volatile components condensed on the inner walls of the tubes along the temperature gradient. The sublimates were then analyzed by a combination of light microscopy, scanning electron microscopy, electron microprobe and X-ray diffraction.Six successive zones of different compositions and mineralogical associations have been identified along the covered range of temperatures (900° to around 400°C). From the high to the low temperatures, these zones are composed of: (1) cristobalite, magnetite, hercynite; (2) molybdenite; (3) acmite; (4) halite, sylvite; (5) sphalerite, pyrite; and (6) galena. Equilibrium calculations show that these crystalline phases are stable for pS₂, pC₁, and pO₂, values typical of magma-buffered gases that have not been contaminated by atmospheric oxygen.The deposits observed in the tubes may be useful in aiding the understanding of the mechanisms acting during the cooling of the gaseous phase on its way to the surface and before its emission into the atmosphere.     

Iron metal production in silicate melts through the direct reduction of Fe(II) by Ti(III), Cr(II), and Eu(II)

The production of metallic iron in silicate melts by the chemical reactions, 2Ti³⁺_(melt) + Fe²⁺_(melt) → 2Ti⁴⁺_(melt) + Fe⁰_(crystal)2Cr²⁺_(melt) + Fe²⁺_(melt) → 2Cr³⁺_(melt) + Fe⁰_(crystal)2Eu²⁺_(melt)+ Fe²⁺_(melt) → 2Eu³⁺_(melt) + Fe⁰_(crystal) has been demonstrated under experimental conditions in a simplified basaltic liquid, Such reactions may occur in lunar basalts and other reduced systems, and, thus, may aid in the understanding of the reduced nature of lunar basalts. The reactions were studied in a glass-forming Na-Ca-Mg-Al-silicate composition at a melt temperature of 1250°C and an imposed oxygen fugacity at the C/CO buffer (1 atm total pressure). Microtitrations of individually-doped samples were used in the quantitative assessment of their redox ratios and for the calibration of visible and near-infrared spectral absorptions. These spectral absorptions were then applied to the evaluation of the mutual redox interactions in dual-doped samples.     

Stream-sediment geochemical prospecting for uranium in the paleozoic of the Belgian ardennes

During the years 1979 and 1980, a preliminary program of uranium exploration in the Paleozoic of the Belgian Ardennes was carried out under the sponsorship of the Commission of European Communities. The Laboratory of Mineralogy of the Polytechnic Faculty of Mons was charged with the radiometric section of the program, the Geochemistry Laboratory of the Free University of Brussels with the hydrogeochemical exploration, and the Geochemistry Laboratory of the University of Louvain with the stream sediment exploration. The Geological Survey of Belgium had the responsibility for coordinating the three programs, the statistical and computer treatment of the data, and the compilation of the different maps.Orientation studies at the Geochemistry Laboratory of the University of Louvain showed that a positive geochemical response for uranium could be obtained with bank sampling, which consists of collecting colluvium and alluvium on both sides of the rivers. This necessitates a large sampling density of about one sample per km² (10 205 samples from an area of 11 000 km²).The frequency distribution of the values of uranium follows the lognormal law with a geometric mean of 1.06 ppm and a threshold of 2.36 ppm (P= 0.954). The anomalies (> 3 ppm) fall into three main areas each in a different geological setting: (1) at the periphery of the Cambro-Silurian Massif of Stavelot; (2) within the transition beds between the Visean and Namurian; and (3) in the lower Devonian of the central Ardennes.The first two areas coincide with zones of known radiometric anomalies and of the occurrence of uraniferous minerals.In the third zone, follow-up work has led to the discovery of a uraniferous mineral assemblage consisting of a weathered mass of iron oxide, leucoxene and phosphates.Statistical analyses of the results indicate no significant relationship between U and either organic carbon or Mn, a negative correlation between U and carbonate and pH, and a good positive correlation between U and Cu, V and Fe. The last correlation may indicate an association of U, V, and Cu with iron oxides formed during meteoric alteration.     

Ilmenite composition in the Tellnes Fe–Ti deposit,SW Norway: fractional crystallization,postcumulus evolution and ilmenite–zircon relation

Major and trace element XRF and in situ LA-ICP-MS analyses of ilmenite in the Tellnes ilmenite deposit, Rogaland Anorthosite Province, SW Norway, constrains a two stage fractional crystallization model of a ferrodioritic Fe-Ti-P rich melt. Stage 1 is characterized by ilmenite-plagioclase cumulates, partly stored in the lower part of the ore body (Lower Central Zone, LCZ), and stage 2 by ilmenite-plagioclase-orthopyroxene-olivine cumulates (Upper Central Zone, UCZ). The concentration of V and Cr in ilmenite, corrected for the trapped liquid effect, (1) defines the cotectic proportion of ilmenite to be 17.5 wt% during stage 1, and (2) implies an increase of D _V^Ilm during stage 2, most likely related to a shift in fO₂. The proportion of 17.5 wt% is lower than the modal proportion of ilmenite (ca. 50 wt%) in the ore body, implying accumulation of ilmenite and flotation of plagioclase. The fraction of residual liquid left after crystallization of Tellnes cumulates is estimated at 0.6 and the flotation of plagioclase at 26 wt% of the initial melt mass. The increasing content of intercumulus magnetite with stratigraphic height, from 0 to ca. 3 wt%, results from differentiation of the trapped liquid towards magnetite saturation. The MgO content of ilmenite (1.4–4.4 wt%) is much lower than the expected cumulus composition. It shows extensive postcumulus re-equilibration with trapped liquid and ferromagnesian silicates, correlated with distance to the host anorthosite. The Zr content of ilmenite, provided by in situ analyses, is low (<114 ppm) and uncorrelated with stratigraphy or Cr content. The data demonstrate that zircon coronas observed around ilmenite formed by subsolidus exsolution of ZrO₂ from ilmenite. The U-Pb zircon age of 920 ± 3 Ma probably records this exsolution process. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.