Synthesis of biochar from sugarcane filter-cake and its impacts on physiological performance of lettuce (<Emphasis Type="Italic">Lettuce sativa</Emphasis>) grown on cadmium contaminated soil

Soil contamination with cadmium has become major concern all over the world because of its adverse impacts on ecosystem health and agricultural land. Soil amendment with biochar may have varied effects on physical and chemical properties of soil. The objective of the study was to explore the impact of sugarcane filter-cake biochar on physiological performance and growth of lettuce in an aged soil. Four different doses (0, 1.5%, 3%, and 5%) of biochar were used in the soil and conditioned for 1 month. After this, lettuce seedlings were grown in the soil. The results showed that the biochar treatment improved the fresh and dry biomass of leaves and roots as well as plant height while diminished the bioavailability of cadmium from the soil. As compared to control, biochar significantly enhanced the chlorophyll content in lettuce leaves. Due to the biochar amendment, the oxidative stress decreased in lettuce shoots over the control. As compared to control, concentration of cadmium in lettuce significantly decreased after the application of biochar. It was concluded that biochar could mitigate the toxicity of cadmium in lettuce by altering the biochemical and physiological processes in cadmium contaminated soil.     

Development of an efficient surrogate model based on aquifer dimensions to prevent seawater intrusion in anisotropic coastal aquifers,case study: the Qom aquifer in Iran

Coastal aquifers are usually exposed to saltwater intrusion. Therefore, groundwater extracted from these aquifers should be regulated considering their dimensions and effective parameters. In this paper, optimum discharge from a large number of exploitation wells is evaluated according to variations of width, length, and anisotropy coefficient in the Qom aquifer near the salt lake in central Iran. First, the wells are divided into clusters to decrease the number of decision variables. Then, the location and discharge from each cluster is obtained using SEAWAT and charged system search (CSS) simulation–optimization model with the assumption of three-dimensional variable density flow. The maximum discharge considering various anisotropy rates is computed based on different values of lengths and widths of the aquifer. Finally, an M5-tree model is trained using the obtained samples to derive a linear relationship between input and output data. Based on the results, for various ranges of width and length of an aquifer with impermeable boundaries, different linear equations for optimum discharge are obtained. Also, it was found that for an aquifer with a small width, the critical discharge is a function of the length while the effect of the boundaries is negligible. Sensitivity analysis of the anisotropy coefficient reveals that with increasing the anisotropy rate, thickness and slope of the transition zone decrease and as the maximum discharge increases consequently. However, the sensitivity of the discharge to anisotropy rate is not remarkable. A comparison between the results of this study with those of the analytical method based on sharp interface assumption is carried out. For the critical condition, the best agreement between analytical equation (\(\overline {L} =0.87\overline {W} +0.62\)) and proposed method (\(\overline {L} =0.83\overline {W} - 1.41\)) is achieved for the anisotropic aquifer when the 50% isochlor is assumed as the measure of salt water intrusion.     

Impact of drilling mud on chemistry and microbiology of an Upper Triassic groundwater after drilling and testing an exploration well for aquifer thermal energy storage in Berlin (Germany)

After completion of an exploration well, sandstones of the Exter Formation were hydraulically tested to determine the hydraulic properties and to evaluate chemical and microbial processes caused by drilling and water production. The aim was to determine the suitability of the formation as a reservoir for aquifer thermal energy storage. The tests revealed a hydraulic conductivity of 1–2 E-5 m/s of the reservoir, resulting in a productivity index of 0.6–1 m³/h/bar. A hydraulic connection of the Exter Formation to the overlaying, artesian “Rupelbasissand” cannot be excluded. Water samples were collected for chemical and microbiological analyses. The water was similarly composed as sea water with a maximum salinity of 24.9 g/L, dominated by NaCl (15.6 g/L Cl and 7.8 g/L Na). Until the end of the tests, the water was affected by drilling mud as indicated by the high pH (8.9) and high bicarbonate concentration (359 mg/L) that both resulted from the impact of sodium carbonate (Na₂CO₃) additives. The high amount of dissolved organic matter (>?58 mg/L) and its molecular-weight distribution pattern indicated that residues of cellulose, an ingredient of the drilling mud, were still present at the end of the tests. Clear evidence of this contamination gave the measured uranine that was added as a tracer into the drilling mud. During fluid production, the microbial community structure and abundance changed and correlated with the content of drilling mud. Eight taxa of sulfate-reducing bacteria, key organisms in processes like bio-corrosion and bio-clogging, were identified. It can be assumed that their activity will be affected during usage of the reservoir.     

Geospatial assessment of soil erosion intensity and sediment yield: a case study of Potohar Region,Pakistan

Estimation of spatial extent of soil erosion, one of the most serious forms of land degradation, is critical because soil erosion has serious implications on soil fertility, water ecosystem, crop productivity and landscape beauty. The primary objective of the current study was to assess and map the soil erosion intensity and sedimentation yield of Potohar region of Pakistan. Potohar is the rainfed region with truncated and complex topography lying at the top of the Indus Basin, the world’s largest irrigation networks of canals and barrages. Spatially explicit Revised Universal Soil Loss Equation (RUSLE) Model integrated with Remote Sensing-GIS techniques was used for detecting/mapping of erosion prone areas and quantification of soil losses. The results show that the Potohar region is highly susceptible to soil erosion with an average annual soil loss of 19 tons ha^?1 year^?1 of which the maximum erosion (70–208 tons ha^?1 year^?1) was near the river channels and hilly areas. The sediment yield due to the erosion is as high as 148 tons ha^?1 year^?1 with an average of 4.3 tons ha^?1 year^?1. It was found that 2.06% of the total area falls under severe soil erosion, 13.34% under high erosion, 15.35% under moderate soil erosion while 69.25% of the area lies in the low (tolerable) soil erosion. Chakwal and Jhelum districts of the region are seriously affected by erosion owing to their topography and soil properties. The information generated in this study is a step forward towards proper planning and implementation of strategies to control the erosion and for protection of natural resources. It is, hence, necessary that suitable water harvesting structures be made to control water to prevent soil erosion and provision of water in the lean season in this region. Tree plantation and other erosion control practices such as strip cropping can also minimize soil erosion in this region.     

The Okavango giant mafic dyke swarm (NE Botswana): its structural significance within the Karoo Large Igneous Province

The structural organization of a giant mafic dyke swarm, the Okavango complex, in the northern Karoo Large Igneous Province (LIP) of NE Botswana is detailed. This N110°E-oriented dyke swarm extends for 1500 km with a maximum width of 100 km through Archaean basement terranes and Permo-Jurassic sedimentary sequences. The cornerstone of the study is the quantitative analysis of N>170 (exposed) and N>420 (detected by ground magnetics) dykes evidenced on a ca. 80-km-long section lying in crystalline host-rocks, at high-angle to the densest zone of the swarm (Shashe area). Individual dykes are generally sub-vertical and parallel to the entire swarm. Statistical analysis of width data indicates anomalous dyke frequency (few data <5.0 m) and mean dyke thickness (high value of 17 m) with respect to values classically obtained from other giant swarms. Variations of mean dyke thicknesses from 17 (N110°E swarm) to 27 m (adjoining and coeval N70°E giant swarm) are assigned to the conditions hosting fracture networks dilated as either shear or pure extensional structures, respectively, in response to an inferred NNW–SSE extension. Both fracture patterns are regarded as inherited brittle basement fabrics associated with a previous (Proterozoic) dyking event. The Okavango N110°E dyke swarm is thus a polyphase intrusive system in which total dilation caused by Karoo dykes (estimated frequency of 87%) is 12.2% (6315 m of cumulative dyke width) throughout the 52-km-long projected Shashe section. Assuming that Karoo mafic dyke swarms in NE Botswana follow inherited Proterozoic fractures, as similarly applied for most of the nearly synchronous giant dyke complexes converging towards the Nuanetsi area, leads us to consider that the resulting triple junction-like dyke/fracture pattern is not a definitive proof for a deep mantle plume in the Karoo LIP.     

Lake Neor reveals how mountain vegetation responded to 7000 years of hydroclimate variability in northwestern Iran

Palynological and geochemical analyses provide valuable information about modern and past climatic regimes and vegetation. The impact of climate and humans on past vegetation in the semi-arid areas of northwestern Iran has received increased interest in the wake of warming temperatures in the Middle East. Palynological and down-core XRF elemental abundances from a peat core from Lake Neor enabled a reconstruction of vegetational changes of the past 7000 years over the highlands of northwestern Iran. Periods of increased arboreal pollen (AP) types and high (Artemisia + Poaceae)/Chenopodiaceae ratios along with low titanium abundances, high percentages of total organic carbon, more negative δD values, and higher carbon accumulation rates suggest a relatively wet climate. These conditions have persisted during the periods 6700–6200, 5200–4450 and 3200–2200 cal a bp. The overall low AP values, substantial rise of Chenopodiaceae, high Ti abundances and low values of palaeo-redox proxies, are all evidences of a drier climate, as has been reconstructed for the periods 6200–5200 and 4030–3150 cal a bp and the last 2200 years. An important feature of the last centuries is the increase of anthropogenic and pastoral indicator pollen types. Our results may provide basic data to predict future trends in vegetation dynamics under future climate change in western Asia.     

Buildings Damages after Elazığ, Turkey Earthquake on January 24, 2020

A 6.8-magnitude earthquake that occurred on January 24, 2020, has been effective in Turkey’s eastern regions. The earthquake, with recorded peak ground acceleration (PGA) value of 0.292 g, caused the destruction or heavy damage of buildings, especially in the city center of Elaz?? province. The purpose of this paper was to share the results of detailed investigation in the earthquake-stricken area. Additionally, the causes of damages and failures observed in the buildings were compared to those that had occurred in previous earthquakes in Turkey. In this study, the damages observed in especially RC buildings as well as in masonry and rural buildings were summarized, the lessons learned were evaluated, and the results were interpreted with reference to Turkish earthquake codes. In the study, it was particularly emphasized why the building stock underwent such damage even though the buildings were exposed to earthquake acceleration well below the design acceleration values.

     

Damage Estimation in Masonry Buildings Based on Excavation-Induced Ground Movements

Excavation-induced ground movements and the resulting damages to adjacent structures and facilities is a source of concern for excavation projects in urban areas. The concern will be even higher if the adjacent structure is old or has low strength parameters like masonry building. Frame distortion and crack generation are predictors of building damage resulted from excavation-induced ground movements, which pose challenges to projects involving excavations. This study is aimed to investigate the relation between excavation-induced ground movements and damage probability of buildings in excavation affected distance. The main focus of this paper is on masonry buildings and excavations stabilized using soil nail wall method. To achieve this purpose, 21 masonry buildings adjacent to 12 excavation projects were studied. Parametric studies were performed by developing 3D FE models of brick walls and excavations stabilized using soil nail wall. Finally, probability evaluations were conducted to analyze the outputs obtained from case studies. Based on the obtained results, simple charts were established to estimate the damage of masonry structures in excavation affected distance with two key parameters including “Displacement Ratio” and “Normalized Distance”. The results also highlight the effects of building distance from excavation wall on its damage probability.

     

Cenozoic Plate interaction of the Australia and Philippine Sea Plates: “hit-and-run” tectonics

Recent studies in northwest New Guinea have shown the presence of at least two marginal basins of different age, both of which formed in back-arc settings. The older basin opened between the Middle Jurassic and Early Cretaceous, a remnant of which is now preserved as the New Guinea Ophiolite. Its obduction started at 40 Ma and it was finally emplaced on the Australian margin at 30 Ma. The younger basin was active during the Oligocene to Middle Miocene and was obducted in the Early Pliocene. Studies of the western edge of the Philippine Sea also reveal an important deformation of the Philippine arc in the Oligocene, which hitherto has remained unexplained. Using information from these systems, paleomagnetic results, kinematic reconstructions and geochemistry of the supra-subduction ophiolite, we present a plate model to explain the region's Eo–Oligocene development. We suggest that an extensive portion of oceanic crust extended the Australian Plate a considerable distance north of the Australian Craton. As Australia began its steady 7–8 cm/year northward drift in the Early Eocene, this lithosphere was subducted. Thus, the portion of the Philippine Sea Plate carrying the Taiwan–Philippine Arc to its present site may have actually been in contact with the ophiolite now in New Guinea and obduction led to deformation of the Philippine Sea Plate itself. Neogene Plate kinematics transported the deformed belt in contact with the Sunda block in the Late Miocene and Pliocene. This interpretation has implications for the origin for the Philippine Sea Plate and the potential incorporation of continental fragments against its boundaries.     

Fracture systems of granites and Quaternary deposits of the area east of Aqaba: indicators of reactivation and neotectonic activity

This study is based on measurement of hundreds of fractures (small faults, joints, cracks) in the crystalline rocks (Precambrian) and in Quaternary deposits of the investigated area east of Aqaba. Fault-slip data, joints, and any weakness zone data from the study area were collected from 20 stations. These stations represent wadi cliffs, stream channels, alluvial fans in the Pleistocene to Holocene sediments, and granitic rocks. During this study, it was assumed that any discontinuity in granitic rocks is a plane of weakness neoformed or inherited and reactivated during the successive tectonic phases. Whereas any cracks, joints, or small displacement in the Pleistocene and Holocene deposits are assumed to represent the activity or, more recently, deformation of the local area where they found. This study found the main trends of weakness zones, the kinematics, and the relation to main stress field in the region. Results show that the Late Neoproterozoic structures were reactivated during the Cenozoic and controlled the recent movement along the Dead Sea Rift. The NNE to N-S trend sets explain the reactivation of the late Neoproterozoic structures during Tertiary times. On the other hand, the formation of the Dead Sea Transform during the Miocene occurred along the N-S to NNE-SSW trending fault system, which was reactivated as sinistral fault.