基于静稳天气下气球探空实验的中国沙漠地区沙尘气溶胶的垂直分布（英文）

塔克拉玛干沙漠是亚洲沙尘气溶胶的重要源地。为探讨塔克拉玛干地区沙尘气溶胶的理化特性与时空变化,研究其环境与气候效应,本文分析了四个季节在中国敦煌(塔克拉玛干沙漠内)取得的探空气球观测数据,包括气溶胶的数浓度、粒径分布、质量浓度及在西风主导下的水平输送通量。气溶胶数浓度的垂直廓线显示,来自沙漠地区的矿物粒子对局地环境与气候有重要影响,且所有季节都存在长距离输送。粒子谱分布显示局地有大量粗粒子输入。结果说明,源于塔克拉玛干沙漠的沙尘气溶胶的背景输送有着重要的科学意义,需进一步研究其对东亚和西太平洋地区环境与气候的影响。     

Recent Sea Level and Sea Surface Temperature Changes Along the Maldives Coast

Maldives, a South Asian small island nation in the northern part of the Indian Ocean is extremely vulnerable to the impacts of Sea Level Rise (SLR) due to its low altitude from the mean sea level. This artricle attempts to estimate the recent rates of SLR in Maldives during different seasons of the year with the help of existing tidal data recorded in the Maldives coast. Corresponding Sea Surface Temperature (SST) trends, utilizing reliable satellite climatology, have also been obtained. The relationships between the SST and mean sea level have been comprehensively investigated. Results show that recent sea level trends in the Maldives coast are very high. At Male, the capital of the Republic of Maldives, the rising rates of Mean Tidal Level (MTL) are: 8.5, 7.6, and 5.8 mm/year during the postmonsoon (October-December), Premonsoon (March-May) and southwest monsoon (June-September) seasons respectively. At Gan, a station very close to the equator, the increasing rate of MTL is maximum during the period from June to September (which is 6.2 mm/year). These rising trends in MTL along the Maldives coast are certainly alarming for this small developing island nation, which is hardly one meter above the mean sea level. Thus there is a need for careful monitoring of future sea level changes in the Maldives coast. The trends presented are based on the available time-series of MTL for the Maldives coast, which are rather short. These trends need not necessarily reflect the long-term scenario. SST in the Maldives coast has also registered significant increasing trend during the period from June to September. There are large seasonal variations in the SST trends at Gan but SST and MTL trends at Male are consistently increasing during all the seasons and the rising rates are very high. The interannual mode of variation is prominent both in SST as well as MTL. Annual profile of MTL along the Maldives coast is bimodal, having two maxima during April and July. The April Mode is by far the dominant one. The SST appears to be the main factor governing the sea level variations along the Maldives coast. The influence of SST and sea level is more near the equatorial region (i.e., at Gan). There is lag of about two months for the maximum influence of SST on the sea level. The correlation coefficient between the smoothed SST and mean tidal level at Gan with lag of two months is as high as ~ +0.8, which is highly significant. The corresponding correlation coefficients at Male with the lags of one and two months are +0.5 and +0.3, respectively. Thus, the important finding of the present work for the Maldives coast is the dominance of SST factor in sea level variation, especially near the region close to the equator.     

The evolution of an electrical fittings industrial cluster in Pakistan

GeoJournal - This study provides an evolution process of electrical fittings industrial cluster in Pakistan by using two rounds of survey dataset (2008 and 2017) taken from the electrical fittings...     

Sediment yield assessment and identification of check dam sites for Rawal Dam catchment

Sediment yield is the amount of erosional debris from drainage basin deposited in reservoirs. The economic life of storage reservoir depends upon the estimation of the time it takes for the reservoir to be filled with the deposition of sediments. This research is based on assessing the sediment yield in Rawal Dam catchment by using Soil and Water Assessment Tool (SWAT) model. Digital Elevation Model (DEM), land use maps, soil maps, and weather data of the study watershed were used as input to SWAT model. Monthly sedimentation data of year 2010 and discharge data from 1998 to 2005 is being used for model calibration and validation, respectively. Whereas simulations are being generated from 1998 to 2011 for both sedimentation and discharge. Modified Universal Soil Loss Equation (MUSLE) was used for the estimation of sediment yield. The Nash and Sutcliffe coefficient of the model was found to be 0.79 which depicts its effectiveness. After the estimation of the sediment yield and discharge by using SWAT model, double mass curve was used to evaluate the sedimentation rate. The rate of sediment transport can be reduced by the construction of check dams. Various sites have also been proposed for check dams construction to prevent the sediments transported into the Rawal Catchment.     

A constitutive model for unsaturated soil interfaces

A constitutive model based on the disturbed state concept is presented to describe the behavior of interfaces in unsaturated soil. The model is an extension of an existing model developed for a sand–steel interface. As opposed to the original model, the modified model incorporates two independent stress variables, which are the net normal stress and matric suction. The saturated and dry state of the interface can be modeled as a special case using the constitutive model presented in this paper. The modified model is capable of capturing the main features of unsaturated interfaces observed during laboratory testing, including increasing shear strength and strain softening with increasing suction and net normal stress and increasing dilatancy with increasing suction. Laboratory tests were carried out on unsaturated interfaces in a modified direct shear test apparatus. The observed behavior of interfaces between unsaturated soil and steel plates (rough and smooth) is presented in comparison with model predictions. Copyright © 2008 John Wiley & Sons, Ltd.     

Recent Sea Level and Sea Surface Temperature Trends Along the Bangladesh Coast in Relation to the Frequency of Intense Cyclones

The French Transportable Laser Ranging System (FTLRS) was deployed in the calibration site of satellite radar altimeters in Corsica over the 2002 and 2005 campaigns. The paper describes the different steps of SLR data processing. The average arcs RMS obtained are about 1–2 cm for Lageos-1&;-2, Starlette and Stella satellites; it is shown that the best results of satellite orbits determination and geocentric positioning are obtained with Eigen-Grace03s gravity model. The difference of FTLRS absolute 3D positioning, between 2002 and 2005, of about 7.7 mm (i.e., 2.6 mm/yr) is less than residual errors of ITRF2005 velocities (of about 4.3 mm/yr).     

Traveltime computation with the linearized eikonal equation for anisotropic media

A linearized eikonal equation is developed for transversely isotropic (TI) media with a vertical symmetry axis (VTI). It is linear with respect to perturbations in the horizontal velocity or the anisotropy parameter η. An iterative linearization of the eikonal equation is used as the basis for an algorithm of finite-difference traveltime computations. A practical implementation of this iterative technique is to start with a background model that consists of an elliptically anisotropic, inhomogeneous medium, since traveltimes for this type of medium can be calculated efficiently using eikonal solvers, such as the fast marching method. This constrains the perturbation to changes in the anisotropy parameter η (the parameter most responsible for imaging improvements in anisotropic media). The iterative implementation includes repetitive calculation of η from traveltimes, which is then used to evaluate the perturbation needed for the next round of traveltime calculations using the linearized eikonal equation. Unlike isotropic media, interpolation is needed to estimate η in areas where the traveltime field is independent of η, such as areas where the wave propagates vertically.
Typically, two to three iterations can give sufficient accuracy in traveltimes for imaging applications. The cost of each iteration is slightly less than the cost of a typical eikonal solver. However, this method will ultimately provide traveltime solutions for VTI media. The main limitation of the method is that some smoothness of the medium is required for the iterative implementation to work, especially since we evaluate derivatives of the traveltime field as part of the iterative approach. If a single perturbation is sufficient for the traveltime calculation, which may be the case for weak anisotropy, no smoothness of the medium is necessary. Numerical tests demonstrate the robustness and efficiency of this approach.     

The upper ionospheres of Jupiter and Saturn

We use a 1-D chemical diffusive model, in conjunction with the measured neutral atmospheric structure, to analyze the Voyager RSS electron density, n_e, profiles for the ionospheres of Jupiter and Saturn. As with previous studies we find serious difficulties in explaining the n_e measurements. The model calculates ionospheres for both Jupiter and Saturn with n_e peaks of 10 times the measured peaks at altitudes which are 900–1000 km lower than the altitude of peaks in the RSS electron densities. Based on our knowledge of neutral atmospheric structure, ionization sources, and known recombination mechanisms it seems that, vibrational excitation of H₂ must play some role in the conversion of slowly radiatively recombining H⁺ ions to the relatively more rapidly recombining H₂⁺ and H₃⁺ ions. In addition, vertical ion flow induced by horizontal neutral winds or electric fields probably also play some role in maintaining the plasma peaks observed both for Jupiter and Saturn to be at high altitudes. For the ionosphere of Saturn, the electron densities are affected by a putative influx of H₂O molecules, Φ_H2O, from the rings. To reproduce the RSS V2 exit n_e results model requires an influx of Φ_H2O 2 × 10⁷ molecules cm⁻² s⁻¹ without invoking H_2f vibrational excitation. To maintain the model n_e peak at the measured altitude vertical plasma drift maintained by meridional winds or vertical electric fields is required. The amounts of H₂O are consistent with earlier estimates of Connerney and Waite (1984) and do not violate any observational constraints.     

Migration velocity analysis using pre‐stack wave fields

Using both image and data domains to perform velocity inversion can help us resolve the long and short wavelength components of the velocity model, usually in that order. This translates to integrating migration velocity analysis into full waveform inversion. The migration velocity analysis part of the inversion often requires computing extended images, which is expensive when using conventional methods. As a result, we use pre‐stack wavefield (the double‐square‐root formulation) extrapolation, which includes the extended information (subsurface offsets) naturally, to make the process far more efficient and stable. The combination of the forward and adjoint pre‐stack wavefields provides us with update options that can be easily conditioned to improve convergence. We specifically use a modified differential semblance operator to split the extended image into a residual part for classic differential semblance operator updates and the image (Born) modelling part, which provides reflections for higher resolution information. In our implementation, we invert for the velocity and the image simultaneously through a dual objective function. Applications to synthetic examples demonstrate the features of the approach.     

Biostratigraphy,Depositional and Diagenetic Processes in Carbonate Rocks from Southern Lebanon: Impact on Porosity and Permeability

Carbonate rocks contain prolific hydrocarbon reserves all over the world, particularly in the Middle East. For exploration and production strategies, it is essential to understand carbonate reservoirs in terms of their internal characteristics, depositional environment, relative age, diagenetic processes and impact on petrophysical properties. This study has been performed on exposed Cretaceous, Paleocene and Miocene marine carbonate sedimentary sequences in two localities (Maghdoucheh and Qennarit) near the city of Sidon (Southern Lebanon). It represents the first comprehensive study that takes into consideration the carbonate reservoir facies, diagenetic history and reservoir quality in the area. Rocks at Maghdoucheh are mainly dominated by limestone beds showing sedimentary structures and erosive bases alternating with microfossil-rich silty marls, related to a shallowing upward sequence in a restricted marine platform environment. Shells of benthic foraminifera and mollusks dominate the fossil assemblage extracted from the studied rocks. The microfossil and nannofossil assemblage detected in the Maghdoucheh sections indicates a middle Miocene age. Rocks at Qennarit are composed of mudstone/wackestone limestone beds rich in planktonic foraminifera and nannofossils related to open marine conditions. Based on the nannofossil content, rocks from Qennarit 1 and 2 are Paleocene and Cretaceous in age, respectively. Four main types of microfacies have been identified, i.e. (1) microbioclastic peloidal calcisiltite, (2) pelagic lime mudstone and wackestone with planktonic microfossils, (3) grainstone/packstone with abundant foraminifera and (4) fenestral bindstones, mudstones and packstones with porostromate microstructures. The porosity-permeability (poro-perm) analysis of representative samples reveals moderate to good porosity but very low permeability. This is mainly due to the presence of large moldic pores that are isolated in nature. The diagenetic features are dominated by micritization and dissolution (both fabric selective and non-fabric selective). Among all diagenetic features, dissolution in both localities contributes to porosity enhancement, while micritization, cementation, compaction and the filled fractures have negative impacts on permeability; hence the overall reservoir quality.