Building damage in Dujiangyan during Wenchuan Earthquake

A field damage survey of 1,005 buildings damaged by the Wenchuan Earthquake in Dujiangyan City was carried out and the resulting data was analyzed using the statistical method. It is shown that buildings that were seismically designed achieved the desired seismic fortification target; they sustained less damage than the non-seismically designed buildings. Among the seismically designed buildings investigated, RC frame buildings performed the best in terms of seismic resistance. Masonry buildings with a ground story of RC frame structure were the second best, and masonry buildings performed the worst. Considering building height, multistory buildings sustained more severe damage than high-rise buildings and 2- and 3-story buildings. Compared to residential buildings, public buildings, such as schools and hospitals, suffered more severe damage.     

Study of vibrating foundations considering soil-pile-structure interaction for practical applications

An investigation of soil-pile-structure interaction is carried out, based on a large reciprocating compressor installed on an elevated concrete foundation （table top structure）. A practical method is described for the dynamic analysis, and compared with a 3D finite element （FE） model. Two commercial software packages are used for dynamic analysis considering the soilpile-structure interaction （SPSI）. Stiffness and damping of the pile foundation are generated from a computer program, and then input into the FE model. To examine the SPSI thoroughly, three cases for the soil, piles and superstructure are considered and compared. In the first case, the interaction is fully taken into account, that is, both the superstructure and soil-pile system are flexible. In the second case, the superstructure is flexible but fixed to a rigid base, with no deformation in the base （no SSI）. In the third case, the dynamic soil-pile interaction is taken into account, but the table top structure is assumed to be rigid. From the comparison beteen the results of these three cases some conclusions are made, which could be helpful for engineering practice.     

平顶山市矿业特点及发展对策浅议

本文从当前平顶山市矿业特点及引发的问题出发,着重指出实现矿业经济可持续发展,必须加大矿业结构的调整,并从资源管理方式、资源配置、矿业秩序、地勘工作等方面作了较为详细的论述。     

Expression of the Phycoerythrin Gene of Gracilaria lemaneiformis (Rhodophyta) in E. coli and Evaluation of the Bioactivity of Recombinant PE

Phycoerythrin (PE) is one of the most important proteins involved in light capturing during photosynthesis in red algae. Its potential biological activities had gained wide concerns. In the present study, tumor cytotoxic and hydroxyl radical assay were preformed to detect the bioactivity of recombinant PE. Recombinant plasmids pGEX-PE and pBGL were transformed into E.coli BL21 to make two recombinant strains BEX (pGEX-PE) and BGL (pBGL). PE expressing in BEX (pGEX-PE) was validated by SDS-PAGE and Western blotting analysis. SDS-PAGE analysis indicated that the PE-GST fusion protein was mostly inclusion bod- ies. Specific expression of PE was confirmed by Western blotting analysis. The recombinant E. coli BEX (pGEX-PE) cells were col- lected and sonicated. The supernatants were reserved for the tumor cytotoxic experiments. The result of tumor cytotoxic assay indi- cated that the supernatants containing PE had the activity of inhibiting the growth of Hela cells and with the increase of protein con- centration, the inhibiting rate increased from 37.31% to 63.26%, which showed significant difference from the control. Hydroxyl radical scavenging effect was tested with supernatants of BEX (pGEX-PE) and BGL (pBGL) cell lysates treated with sonication and heating. For the sonication samples, the scavenging rates of the supernatants of BEX (pGEX-PE) and BGL (pBGL) cell lysates were significantly higher than the negative control BL21(pGEX-4T) (P<0.02), and the scavenging rates increased slowly following the increase of the protein content. For the heating samples, except for the 0.2 mg mL-1 BGL (pBGL) products, the scavenging effects of the supernatants of BEX (pGEX-PE) and BGL (pBGL) cell lysates were stronger than that of negative control BL21(pGEX-4T). However, the effect intensity was not positively correlated with the increase of the protein concentration. Though a partially de- creased hydroxyl radical scavenging activity was led by heating, the biological activity was still retained and conspicuous. This re- search showed that phycoerythrin protein expressing in E. coli has the potential medical and sanitarian value.     

Selection of hazardous waste dumpsites based on parameters effecting soil adsorption capacity – a case study

A careful selection of waste dumpsites, particularly hazardous ones, is very important for sustainable water resources management. Several laboratory experiments were carried out on the field samples to study adsorption capacity using p-dichlorobenzene (a solvent used in various industrial processes) as the test contaminant. The effect of parameters such as organic matter, clay, and iron and aluminium oxides, which are known to influence the soil adsorption capacity, are studied in the present work. Several soil samples from the Patancheru Industrial Area (Hyderabad, India) were collected and characterized. Only three soils, which had a comparatively high percentage of organic matter, clay, iron and aluminium oxide contents were used for the adsorption studies. The results clearly indicated a decrease in the adsorption capacity of the soils by as much as 75% when organic matter was removed. The other parameters such as clay and iron and aluminium oxides also play an important role in adsorption (57 and 39.8% reduction respectively). It was observed that out of the selected factors organic matter in the soils has the maximum effect regarding the adsorption of p-dichlorobenzene. Since the selected soils contain comparatively more organic matter, clay and iron and aluminium oxides in the selected industrial area, these can be used as sites for dumping hazardous waste, which can be further treated by methods like bioremediation.     

Enhanced bioremoval of refractory compounds from dyeing wastewater using optimized sequential anaerobic/aerobic process

The upflow anaerobic sludge blanket process followed by the biological aerated filter process was employed to improve the removal of color and recalcitrant compounds from real dyeing wastewater. The highest removal efficiency for color was observed in the anaerobic process, at 8-h hydraulic retention time, seeded with the sludge granule. In the subsequent aerobic process packed with the microbe-immobilized polyethylene glycol media, the removal efficiency for chemical oxygen demand increased significantly to 75 %, regardless of the empty bed contact time. The average influent non-biodegradable soluble chemical oxygen demand was 517 mg/L, and the average concentration in effluent from the anaerobic reactor was 363 mg/L, suggesting the removal of some recalcitrant matters together with the degradable ones. The average non-biodegradable soluble chemical oxygen demand in effluent from the aerobic reactor was 87, 93, and 118 mg/L, with the removal efficiency of 76, 74, and 67 %, at 24-, 12-, and 8-h empty bed contact time, respectively. The combined anaerobic sludge blanket and aerobic cell-entrapped process was effective to remove the refractory compounds from real dyeing wastewater as well as in reducing organic loading to meet the effluent discharge limits. This integrated process is considered an effective and economical treatment technology for dyeing wastewater.     

Effects of natural attenuation processes on groundwater contamination caused by abandoned waste sites in Berlin

The aim of this research project is to identify, characterize and quantify natural attenuation (NA) processes in groundwater affected by emissions of abandoned waste disposal sites in Berlin-Kladow/Gatow, Germany. It is part of the funding priority called KORA established by the Federal Ministry for Education and Research (BMBF) to explore the extent to which NA can be used for remedial purposes for varied forms of soil and groundwater contamination. Information on the emission behaviour of individual parameters is generated on the basis of hydrogeochemical comparison of 20 years old and new data. Using groundwater-modelling and CFC-analysis, information on the transport and retention of pollutants in groundwater is compiled. The microbial colonization of contaminated aquifers is characterized by molecular biological methods [polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE)] to differentiate between contaminated and not contaminated zones.     

Iron isotopic analyses of geological reference materials on MC-ICP-MS with instrumental mass bias corrected by three independent methods

Here we report iron (Fe) isotopic data of three pure Fe solution standards (IRMM-014, GSB Fe, and NIST 3126a) and five widely used geological reference materials (RMs) from the United States Geological Survey and Geological Survey of Japan obtained on a Neptune Plus multi-collector–inductively coupled plasma–mass spectrometer (MC-ICP-MS) in our laboratory over the past 3 years. The instrumental mass bias was corrected by three independent methods: sample-standard bracketing (SSB), Ni doping?+?SSB, and ⁵⁷Fe–⁵⁸Fe double spike?+?SSB. Measurements reveal that both the Ni doping and double spike methods helped calibrate short-term fluctuations in mass bias. Collectively, almost all measurements of RMs yielded δ⁵⁶Fe within?±?0.05 of recommended values, provided that each sample was measured four times on MC-ICP-MS. For the first time, new recommended values for NIST SRM3126a are reported (δ⁵⁶Fe?=?0.363?±?0.006, 2SE, 95% CI; and δ⁵⁷Fe?=?0.534?±?0.010, 2SE).     

The effect of annealing on the luminescence decay-time of synthetic calcite:Mn

Calcite was synthesized by four methods, and the luminescence decay-time was measured for nine samples before and after heating hydrothermally in the temperature range 200–400°C. Decay-time data were collected between room temperature and approximately 15 K. The decay time at room temperature is approximately 50 ms, with little difference between a given calcite before and after hydrothermal treatment. The decay time at 15 K is always greater than at room temperature as the effect of thermal quenching diminishes. Differences in decay time before and after heating are more apparent at low temperature owing to this reduction in thermal quenching. The decay time decreased significantly in two samples, and an increase in decay time was observed in the remaining seven samples following heating. Among the latter group, the change in decay time was insignificant in three samples. The results are compared with previous data in which it was shown that the effect of heating is to increase the intensity of luminescence.     

Flow Characteristics of Cemented Paste Backfill

Cemented paste backfill (CPB) is primarily used for backfilling underground voids at George Fisher Mine (Mount Isa, Australia). The objective of this paper is to summarise the geotechnical characterisation of the tailings and the rheological properties of the CPB as determined from a laboratory testing program undertaken at James Cook University. Two binders were examined [a General Purpose cement and a slag blend cement] over a range of dosages from 0 to 6% and CPB mix solids content in the range of 72–78%. The slump tests were carried out using the standard cone (ASTM C 143) used for concrete and a cylinder with 110 mm (diameter) × 110 mm (height), whereas the yield stress was measured using a shear vane (Brookfield vane spindle V-73). The index characteristics of the tailings including the grain size distribution, liquid limit, plastic limit, specific gravity were determined as per ASTM standards. This paper will then discuss the interrelationships among the solid content, slump, saturated density and the yield stress of the CPB. It is shown that there is strong correlation between the two different slump test devices used in this study. The smaller cylindrical device appears to have good potential for slurries like mine tailings or dredged mud that have high water content for slump test. There is also strong inter-relationship among solid content, slump, yield stress, and bulk density. Increasing the solid content increases the bulk density and yield stress, but reduces the slump. While there is hardly any difference between the two binder types used in this study in terms of flow parameters, namely the yield stress and slump, the binder dosage has an effect. At any specific solid content, higher binder dosages lead to a drop in the slump and increase in the yield stress. The difference is more pronounced in dense slurries. It is also strongly believed that the trends and relationships developed in this study may be valuable for the other mining operations using CPB.