Shaking table tests of a reinforced concrete bridge pier with a low-cost sliding pendulum system

After the occurrence of various destructive earthquakes in Japan, extensive efforts have been made to improve the seismic performance of bridges. Although improvements to the ductile capacities of reinforced concrete (RC) bridge piers have been developed over the past few decades, seismic resilience has not been adequately ensured. Simple ductile structures are not robust and exhibit a certain level of damage under extremely strong earthquakes, leading to large residual displacements and higher repair costs, which incur in societies with less-effective disaster response and recovery measures. To ensure the seismic resilience of bridges, it is necessary to continue developing the seismic design methodology of RC bridges by exploring new concepts while avoiding the use of expensive materials. Therefore, to maximize the postevent operability, a novel RC bridge pier with a low-cost sliding pendulum system is proposed. The seismic force is reduced as the upper component moves along a concave sliding surface atop the lower component of the RC bridge pier. No replaceable seismic devices are included to lengthen the natural period; only conventional concrete and steel are used to achieve low-cost design solutions. The seismic performance was evaluated through unidirectional shaking table tests. The experimental results demonstrated a reduction in the shear force transmitted to the substructure, and the residual displacement decreased by establishing an adequate radius of the sliding surface. Finally, a nonlinear dynamic analysis was performed to estimate the seismic response of the proposed RC bridge pier.     

Estimation of Reconnection Flux Using Post-eruption Arcades and Its Relevance to Magnetic Clouds at 1 AU

We report on a new method to compute the flare reconnection (RC) flux from post-eruption arcades (PEAs) and the underlying photospheric magnetic fields. In previous works, the RC flux has been computed using the cumulative flare ribbon area. Here we obtain the RC flux as the flux in half of the area underlying the PEA in EUV imaged after the flare maximum. We apply this method to a set of 21 eruptions that originated near the solar disk center in Solar Cycle 23. We find that the RC flux from the arcade method (\(\Phi_{\mathrm{rA}}\)) has excellent agreement with the flux from the flare-ribbon method (\(\Phi_{\mathrm{rR}}\)) according to \(\Phi_{\mathrm{rA}} = 1.24(\Phi_{\mathrm{rR}})^{0.99}\). We also find \(\Phi_{\mathrm{rA}}\) to be correlated with the poloidal flux (\(\Phi_{\mathrm{P}}\)) of the associated magnetic cloud at 1 AU: \(\Phi_{\mathrm{P}} = 1.20(\Phi_{\mathrm{rA}})^{0.85}\). This relation is nearly identical to that obtained by Qiu et al. (Astrophys. J. 659, 758, 2007) using a set of only 9 eruptions. Our result supports the idea that flare reconnection results in the formation of the flux rope and PEA as a common process.     

Comparison of Helicity Signs in Interplanetary CMEs and Their Solar Source Regions

If all coronal mass ejections (CMEs) have flux ropes, then the CMEs should keep their helicity signs from the Sun to the Earth according to the helicity conservation principle. This study presents an attempt to answer the question from the Coordinated Data Analysis Workshop (CDAW), “Do all CMEs have flux ropes?”, by using a qualitative helicity sign comparison between interplanetary CMEs (ICMEs) and their CME source regions. For this, we select 34 CME–ICME pairs whose source active regions (ARs) have continuous SOHO/MDI magnetogram data covering more than 24 hr without data gap during the passage of the ARs near the solar disk center. The helicity signs in the ARs are determined by estimation of cumulative magnetic helicity injected through the photosphere in the entire source ARs. The helicity signs in the ICMEs are estimated by applying the cylinder model developed by Marubashi (Adv. Space. Res., 26, 55, 2000) to 16 second resolution magnetic field data from the MAG instrument onboard the ACE spacecraft. It is found that 30 out of 34 events (88 %) are helicity sign-consistent events, while four events (12 %) are sign-inconsistent. Through a detailed investigation of the source ARs of the four sign-inconsistent events, we find that those events can be explained by the local helicity sign opposite to that of the entire AR helicity (28 July 2000 ICME), incorrectly reported solar source region in the CDAW list (20 May 2005 ICME), or the helicity sign of the pre-existing coronal magnetic field (13 October 2000 and 20 November 2003 ICMEs). We conclude that the helicity signs of the ICMEs are quite consistent with those of the injected helicities in the AR regions from where the CMEs erupted.     

Post-Eruption Arcades and Interplanetary Coronal Mass Ejections

We compare the temporal and spatial properties of posteruption arcades (PEAs) associated with coronal mass ejections (CMEs) at the Sun that end up as magnetic cloud (MC) and non-MC events in the solar wind. We investigate the length, width, area, tilt angle, and formation time of the PEAs associated with 22 MC and 29 non-MC events and we find no difference between the two populations. According to current ideas on the relation between flares and CMEs, the PEA is formed together with the CME flux-rope structure by magnetic reconnection. Our results indicate that at the Sun flux ropes form during CMEs in association with both MC and non-MC events; however, for non-MC events the flux-rope structure is not observed in the interplanetary space because of the geometry of the observation, i.e. the location of the spacecraft when the structure passes through it.     

Radio imaging of the Subaru/XMM–Newton Deep Field – I. The 100-μJy catalogue, optical identifications, and the nature of the faint radio source population

We describe deep radio imaging at 1.4 GHz of the 1.3-deg² Subaru/ XMM–Newton Deep Field (SXDF), made with the Very Large Array in B and C configurations. We present a radio map of the entire field, and a catalogue of 505 sources covering 0.8 deg² to a peak flux density limit of 100 μJy. Robust optical identifications are provided for 90 per cent of the sources, and suggested identifications are presented for all but 14 (of which seven are optically blank, and seven are close to bright contaminating objects). We show that the optical properties of the radio sources do not change with flux density, suggesting that active galactic nuclei (AGN) continue to contribute significantly at faint flux densities. We test this assertion by cross-correlating our radio catalogue with the X-ray source catalogue and conclude that radio-quiet AGN become a significant population at flux densities below 300 μJy, and may dominate the population responsible for the flattening of the radio source counts if a significant fraction of them are Compton-thick.     

MEAN SEA LEVEL AND SEA SURFACE VARIABILITY OF NQRTHWEST PACIFIC OCEAN AND EASTERN CHINA SEAS FROM GEOSAT ALTIMETRY

Collinear analysis technique is widely used for determining sea surface variability with Geosat altimeterdata from its Exact Repeat Mission(ERM).But most of the researches have been only on global scaleor in oceans deeper than 2000 m.In shallow shelf waters this method is hampered by the inaccuracy ofocean tide data supplied with Geosat Geophysical Data Records(GDRs).This work uses a modified collinearanalysis technique characterized by simultaneous separation of mean sea level and ocean tide with theleast squares method,to compute sea surface variability in the Northwest Pacific Ocean and eastern ChinaSeas.The mean sea level map obtained contains not ouly bathymetric but also dynamic features such asamphidromes,indicating considerable improvement over previous works.Our sea surface variability mapsshow clearly the main current system,the well-known Zhejiang coastal upwelling,and a northern East Chi-na Sea meso-scale eddy in good agreement with satellite sea surface temperature(SST)observation and his-to     

Evidence of a link between the evolution of clusters and their AGN fraction

We discuss the optical properties, X-ray detections and active galactic nucleus (AGN) populations of four clusters at   z ∼ 1  in the Subaru–XMM Deep Field (SXDF). The velocity distribution and plausible extended X-ray detections are examined, as well as the number of X-ray point sources and radio sources associated with the clusters. We find that the two clusters that appear virialized and have an extended X-ray detection contain few, if any, AGN, whereas the two pre-virialized clusters have a large AGN population. This constitutes evidence that the AGN fraction in clusters is linked to the clusters' evolutionary stage. The number of X-ray AGN in the pre-virialized clusters is consistent with an overdensity of a factor of ∼200; the radio AGN appear to be clustered with a factor of 3 to 6 higher. The median K -band luminosities of   L_K = 1.7 ± 0.7 L *  for the X-ray sources and   L_K = 2.3 ± 0.1 L *  for the radio sources support the theory that these AGN are triggered by galaxy interaction and merging events in sub-groups with low internal velocity distributions, which make up the cluster environment in a pre-virialization evolutionary stage.     

A pilot survey for KX QSOs in the UKIDSS Ultra Deep Survey Field

We have undertaken a pilot survey for faint quasi-stellar objects (QSOs) in the UKIRT Infrared Deep Survey (UKIDSS) Ultra Deep Survey (UDS) Field using the KX selection technique. These observations exploit the very deep near-infrared and optical imaging of this field from United Kingdom Infrared Telescope (UKIRT) and Subaru to select candidate QSOs based on their VJK colours and morphologies. We determined redshifts for 426 candidates using the AAOmega spectrograph on the Anglo-Australian Telescope in service time. We identify 17 QSOs  ( M _B ≲−23)  in this pilot survey at z = 1.57–3.29. We combine our sample with an X-ray-selected sample of QSOs in the same field (a large fraction of which also comply with our KX selection) to constrain the surface density of QSOs with K ≤ 20, deriving limits on the likely surface density of 85–150 deg⁻². We use the good image quality available from our near-infrared imaging to detect a spatially extended component of the QSO light which probably represents the host galaxies. We also use our sample to investigate routes to improve the selection of KX QSOs at faint limits in the face of the significant contamination by compact, foreground galaxies. The brightest examples from our combined QSO sample will be used in conjunction with a large Very Large Telescope VIMOS spectroscopic survey of high-redshift galaxies in this region to study the structures inhabited by gas, galaxies and growing supermassive black holes at high redshifts in the UKIDSS UDS.     

Dissakisite-(Ce) chemical composition: some implications for its origins

Euhedral dissakisites from Trimouns dolomite mine, France, is compositionally zoned. Back-scattered electron (BSE) images reveal that each of the described dissakisite crystals has three distinct compositional zones: normal zoned core (Mg-rich), oscillatory zoned middle (Ca–Al-rich) and homogeneous rim (Fe–ΣREE-rich). The latter zone with Fe²⁺ > Mg corresponds to allanite-(Ce). Dissakisite-(Ce) also displays pronounced zoning in Fe/Mg which may suggest that the temperature of crystallization continuously decreased from core to rim. Despite a systematic increase in Fe/Mg of the dissakisite with an allanite rim, there is no monotonic decrease in the REE zoning: the normal zoned core and homogeneous rim are rich in La, Ce and Pr, but the relatively REE-poor oscillatory zoned middle is relatively abundant in Y, Sm and Gd. Discontinuous variation in REE content of the dissakisite, with the allanite rim may indicate a localized change in either the relative concentration of various ligands or pH of the crystallizing fluid. Observations under the polarizing microscope confirm that the different zones have simultaneous extinction. These chemical and optical observations suggest that epitaxial crystallization of dissakisite, from Trimouns, passes through three formation stages. The ternary Fe²⁺–Mg²⁺–(Al + Fe)³⁺ diagram illustrates that in general dissakisite can be classified into two groups, (Al + Fe)³⁺-rich and an Mg-rich; dissakisite from Trimouns belongs to the former group. Chondrite-normalized REE patterns of dissakisites from Trimouns are similar to those of allanites formed by hydrothermal fluids. In conclusion, it is clear from the above two geochemical characteristics that dissakisites from Trimouns are of (Al + Fe)³⁺-type, and were derived from hydrothermal fluids.