Chromitite and peridotite from Rayat, northeastern Iraq, as fragments of a Tethyan ophiolite

Ophiolitic rocks (chromitites and serpentinized peridotites) were petrologically examined in detail for the first time from Rayat, in the Iraqi part of the Zagros thrust zone, an ophiolitic belt. Almost all the primary silicates have been altered out, but chromian spinel has survived from alteration and gives information about the primary petrological characteristics. The protolith of the serpentinite was clinopyroxene-free harzburgite with chromian spinel of intermediate Cr# (= Cr/[Cr + Al] atomic ratio) of 0.5 to 0.6. The harzburgite with that signature is the most common in the mantle section of the Tethyan ophiolites such as the Oman ophiolite, and is the most suitable host for chromitite genesis. Except for one sample, which has Cr# = 0.6 for spinel, the Cr# of spinel is high, around 0.7, in chromitite. The variation in Cr# of spinel in chromitite observed here has been also reported in the Oman ophiolite. The peridotite with chromitite pods exposed at Rayat was derived from an ophiolite similar in petrological character to the Oman ophiolite, one of the typical Tethyan ophiolites (fragments of Tethyan oceanic lithosphere). This result is consistent with the previous interpretation based on geological analysis.     

Modeling interaction of fluid and salt in an aquifer/lagoon system

To simulate the dynamic interaction between a saline lagoon and a ground water system, a numerical model for two-dimensional, variable-density, saturated-unsaturated, and coupled flow and solute transport (saltwater intrusion by finite elements and characteristics [SIFEC]) was modified to allow the volume of water and mass of salt in the lagoon to vary with each time step. The modified SIFEC allows the stage of a lagoon to vary in accordance with a functional relation between the stage and water volume of the lagoon, and also allows the salt concentration of the lagoon to vary in accordance with the salt budget of the lagoon including chemical precipitation and dissolution of salt. The updated stage and salt concentration of the lagoon are in turn used as transient boundary conditions for the coupled flow and solute transport model. The utility of the modified model was demonstrated by applying it to the eastern Mediterranean coastal region of Turkey for assessing impacts of climate change on the subsurface environment under scenarios of sea level rise, increased evaporation, and decreased precipitation.     

Quantification of the effect of forest harvesting versus climate on streamflow cycles and trends in an evergreen broadleaf catchment

ABSTRACT

A new method known as Unobserved Components–Dynamic Harmonic Regression (UC-DHR) was applied to a 39-year record of rainfall and streamflow for three sub-catchments of the Sarukawa Experimental Watershed in southwestern Japan. Some 25% of the timber was harvested from one of the sub-catchments in May–July 1982 and the objective was to quantify the magnitude of this effect relative to the effects of climate cycles (e.g. Southern Oscillation Index). The observed effects of inter-annual climate cycles (i.e. 0.89–1.36 mm/d) were seen to be comparable (i.e. 0.70–1.17 mm/d) to the effects of harvesting 25% of the standing timber. This result underlines the importance of always quantifying the effect of climate on streamflow response when harvesting impacts are studied.

Editor D. Koutsoyiannis; Associate editor T. Okruszko     

Structure and dynamics of water on muscovite mica surfaces

The structure and dynamics of water on muscovite mica (0 0 1) surfaces have been investigated by molecular dynamics simulations. X-ray reflectivity profiles highly reflecting the interfacial structure are directly calculated and compared with those of experiments. The direct comparison has validated the usefulness of MD simulations to understand the real interfacial structure of the mica−water system. We observed five distinguished peaks in the density profile of oxygen present in water, and these peaks are attributable to the water molecules directly adsorbed on mica, hydrated to the K⁺ ions on the mica surface, and ordered due to hydrogen bonds between hydrated K⁺ ions. The hydrated K⁺ ions make an inner-sphere complex and have an explicit first hydration shell with a radius of 3.6 Å and a hydration number of 2.9. The change of the viscosity of water located above 1 nm apart from the mica surface was not observed. This feature is in good agreement with a recent experimental study in which the shear measurement was conducted using a surface forces apparatus. The increase of the viscosity by a factor of ca. 2-3 relative to that of the bulk water was observed at water located within 1 nm from the isolated mica surface.     

Short-term variation in copepod community and physical environment in the waters adjacent to the Kuroshio Current

A continuous survey examined short-term variations in the zooplankton community and physical ocean environment from the northeastern Izu Islands to Boso Peninsula in Japan. High copepod abundance and small upwellings in the surface layer and salinity minimum layer in the subsurface were observed on the north side of coastal fronts in the westernmost transect, moving southward as the Kuroshio Current left the Boso Peninsula. Thus, the salinity minimum layer might be a key factor forming upwelling and the fronts, leading to large abundance of coastal copepods off the northeastern Izu Islands. A community structure analysis of calanoid copepods revealed an intermediate belt assemblage between coastal and offshore (Kuroshio) assemblages. Copepod abundance was remarkably low and Ctenocalanus vanus dominated (nearly 37%) in the intermediate belt zone, indicating that C. vanus has a relatively high tolerance to adverse environments for calanoid copepods. As the Kuroshio Current left the Boso Peninsula, the coastal assemblage expanded in the same direction, and the intermediate belt assemblage off the northeastern Izu Islands disappeared. The largest population of Calanus sinicus was found along the two western transects off the northeastern Izu Islands (>1000 m depth), which was assumed to be transported from Sagami Bay and advanced southwestward while growing from copepodite stages CIII to CV. Larvae of C. sinicus would be an important food for fish larvae in addition to Paracalanus parvus s.l., the numerically dominant species in the coastal assemblage, and C. vanus under the adverse conditions for coastal copepods.     

Bed morphological changes around a finite patch of vegetation

For the appropriate management and restoration of rivers, isolated vegetation is often a practical means for improving stream habitat and ecology. The effect of a finite vegetation patch on flow and bed morphology in an open channel was investigated using laboratory experiments. The patch containing emergent and submerged vegetation was modeled using circular cylinders and located mid‐channel along a side wall. Several configurations of the patch and submergence ratio (i.e. water depth to the height of vegetation), and two flow conditions (i.e. below and above the sediment motion threshold) were considered. For flows below the sediment motion threshold, erosion occurred primarily on the opposite side of the patch and near the leading edge of the patch. The degree of scouring depth observed in both these regions was affected by the submergence ratio and it increased with the non‐dimensional flow blockage (i.e. the product of the patch density and width). In contrast, for flows above the sediment motion threshold, sediment accumulated within and around the patch due to a reduction in bed shear stress, which was strongly influenced by the flow blockage and the obstruction ratio (i.e. the ratio of patch width to channel width). The eroded area observed within the patch was consistent with the interior adjustment region where the deceleration and diversion of flow occurred through the patch. As the flow blockage increased or as the obstruction ratio decreased, the deposition rate within and behind the patch decreased. Furthermore, the deposition rate increased with an increase in the ratio of flow rate through the patch to total flow rate regardless of the submergence ratio. Copyright © 2014 John Wiley & Sons, Ltd.     

Seismic velocity structure around the Hyuganada region, Southwest Japan, derived from seismic tomography using land and OBS data and its implications for interplate coupling and vertical crustal uplift

The Hyuganada region, a forearc region of Southwest Japan, is characterized by several interesting geological and geophysical features, i.e., significant aseismic crustal uplift of 120 m during the past 120 thousand years at the Miyazaki Plain, negative free-air gravity anomalies with the maximum magnitude of −130 mgal, and relatively less cohesive interplate coupling compared with that for off the Shikoku and Kii Peninsula. In order to examine the causes of these observations, we determined a detailed three-dimensional seismic velocity structure based on the seismic data observed by ocean bottom seismometers (OBS) and land stations. P- and S-wave tomographic velocity structures clearly indicate the subducting slab and also the zones of high Poisson's ratio at 25–35 km depth along the coastline of the northeastern part of the Hyuganada. The region with high Poisson's ratio may correspond to the serpentinized mantle wedge as suggested for other mantle wedges, and appears to be coincident with the zone for observed aseismic slips such as the slow-slip and after-slip events. Also, the detection may be related to a relatively weak interplate coupling in the Hyuganada region. The tomographic structures also indicate low velocity zones with a horizontal scale comparable to the Kyushu-Palau Ridge in and around the subducting slab. If we assume that the low velocity zones correspond to the subducted Kyushu-Palau Ridge, then the predicted gravity anomaly due to the density contrast between the low velocity zones and the surrounding region can explain about 60% of the gravity anomaly in the Hyuganada region. The buoyancy is probably an important factor for the crustal uplift observed in the Miyazaki Plain, the steep bending of the subducting slab and the normal fault-type earthquakes around the Hyuganada region.     

Mineralogical and geochemical characteristics of hydrothermal alteration of basalt in the Kuroko mine area, Japan: implications for the evolution of a Back Arc Basin hydrothermal system

Basalt in the Furutobe District of the Kuroko mine area in Japan is characterized by abundant chlorite and epidote. Fluid inclusion studies indicate that chlorite is formed at lower temperatures (230–250°C) than epidote (250–280°C). The seawater/basalt mass ratio for the early chlorite-rich alteration was high (max. 40), but that for the later alteration was low (0.1–1.8). The CaO, Na₂O and SiO₂ of the bulk rock correlate negatively with MgO, while FeO and Σ Fe correlate positively with MgO. These changes in the characteristic features of hydrothermal alteration from early to late are generally similar to those for a mid-ocean ridge geothermal system accompanying basalt alteration.The MgO/FeO ratios of chlorite and actinolite and the Fe₂O₃ concentration of epidote from the basalt are greater than those of mid-ocean ridge basalt probably owing to the differences in the Fe₂O₃/FeO and MgO/FeO ratios of the parent rocks. The lower CaO concentration and the higher Na₂O concentration of the bulk rock compared with altered mid-ocean ridge basalt can be interpreted in terms of the difference in original bulk rock compositions.The Furutobe basalt, as well as other submarine back arc basalts, contains more vesicles filled with hydrothermal minerals (epidote, calcite, quartz, chlorite, pyrite) than do the mid-ocean ridge basalts. The abundance of vesicles plays an important role in controlling the secondary mineralogy and geochemistry of hydrothermally altered submarine back arc basin basalts.     

Polarization Calibration of the <Emphasis Type="Italic">Chromospheric Lyman-Alpha SpectroPolarimeter</Emphasis> for a 0.1% Polarization Sensitivity in the VUV Range. Part II: In-Flight Calibration

The Chromospheric Lyman-Alpha SpectroPolarimeter is a sounding rocket instrument designed to measure for the first time the linear polarization of the hydrogen Lyman-\({\upalpha }\) line (121.6 nm). The instrument was successfully launched on 3 September 2015 and observations were conducted at the solar disc center and close to the limb during the five-minutes flight. In this article, the disc center observations are used to provide an in-flight calibration of the instrument spurious polarization. The derived in-flight spurious polarization is consistent with the spurious polarization levels determined during the pre-flight calibration and a statistical analysis of the polarization fluctuations from solar origin is conducted to ensure a 0.014% precision on the spurious polarization. The combination of the pre-flight and the in-flight polarization calibrations provides a complete picture of the instrument response matrix, and a proper error transfer method is used to confirm the achieved polarization accuracy. As a result, the unprecedented 0.1% polarization accuracy of the instrument in the vacuum ultraviolet is ensured by the polarization calibration.