基于功能点的海洋测绘软件成本估算的研究

软件规模在项目的计划与实施中具有指导性的作用。比较了多种软件规模估算方法的优缺点,给出了功能点法估算软件规模的方法和步骤。首先计算软件未调整功能点数,再根据复杂性因子调整功能点数,最后根据企业工资效率估算出软件的成本。并结合海洋测绘软件的实例,列举了该方法的实施过程。     

Ultimate Bending Capacity of Strain Hardening Steel Pipes

Based on Hencky’s total strain theory of plasticity, ultimate bending capacity of steel pipes can be determined analytically assuming an elastic-linear strain hardening material, the simplified analytical solution is proposed as well. Good agreement is observed when ultimate bending capacities obtained from analytical solutions are compared with experimental results from full-size tests of steel pipes. Parametric study conducted as part of this paper indicates that the strain hardening effect has significant influence on the ultimate bending capacity of steel pipes. It is shown that pipe considering strain hardening yields higher bending capacity than that of pipe assumed as elastic-perfectly plastic material. Thus, the ignorance of strain hardening effect, as commonly assumed in current codes, may underestimate the ultimate bending capacity of steel pipes. The solutions proposed in this paper are applicable in the design of offshore/onshore steel pipes, supports of offshore platforms and other tubular structural steel members.     

Photodegradation of dimethyl phthalate (DMP) by UV–TiO<Subscript>2</Subscript> in aqueous solution: operational parameters and kinetic analysis

In this paper, the adsorption and degradation phenomenon involved in the photocatalytic degradation of dimethyl phthalates (DMPs) by titanium dioxide (TiO₂) was studied. A variety of operating variables were selected firstly. Then, it was proved that even for such weak adsorption properties molecules as DMP, adsorption was still an important prerequisite for photolysis. A surface-mediated reaction process was proposed that the photodegradation of DMP assisted by TiO₂ particles occurred primarily at the surface of the photocatalyst rather than in the homogeneous phase. According to Langmuir–Hinshelwood model, the adsorption constant determined from the dark adsorption was far less than that obtained in the light condition. Enhanced DMP adsorption on the surface of TiO₂ under irradiation was the possible reason for the improvement of photodegradation efficiency. Under the irradiation of light, a synergistic mechanism of adsorption and photocatalysis was responsible for DMP degradation. The quantitative analysis by adding scavengers indicated that ^·OH radical was primarily responsible for the photodegradation of DMP. It was further verified that ^·OH was produced much more from conduction band electrons rather than valance band holes toward photodegradation of DMP by adding foreign Cu²⁺.     

Correlation analysis between drought indices and terrestrial water storage from 2002 to 2015 in China

Drought monitoring is a key topic in environmental monitoring and assessment although there is still a need to determine the correlation between drought monitoring indices and remote sensing products. We analyzed the correlation between the self-calibrating Palmer Drought Severity Index (sc_PDSI), the Standardized Precipitation Index and the Standardized Precipitation Evapotranspiration Index (SPEI) and terrestrial water storage monitored through the Gravity Recovery and Climate Experiment (GRACE) on a monthly timescale from 2002 to 2015 in China. As a consequence of anomalies in the soil water budget, the highly significant correlation between the sc_PDSI and the GRACE satellite-observed terrestrial water storage suggested that these two datasets are the most suitable for use in monitoring droughts. In comparing the three drought indices, the sc_PDSI was introduced as a means of drought monitoring in the Yangtze, Pearl, Huaihe, Southeast and Songhua River Basins, whereas the SPEI was found to be more applicable to other major river basins, such as the Inland River Basin. These diverse spatial behaviors are caused by the differences between the hydrological droughts characterized by these three drought indices.     

Effects of vegetation restoration on soil physical properties of abandoned farmland on the Loess Plateau,China

To improve the ecological environment in China, the Chinese government implemented a country-wide ecological protection and reforestation project (namely the “Grain for Green Project”) in 1999 to return cultivated land with slopes of 25° or more to perennial vegetation. Vegetation restoration reduces soil erosion mainly by changing the soil physical properties. Different vegetation restoration methods might produce different impacts on soil physical properties. In this study, two vegetation restoration methods (i.e., natural restoration and artificial restoration) were compared on abandoned farmland in the typically hilly and gullied areas of the Loess Plateau of Northwest China. In the natural restoration method, the farmland was abandoned to natural vegetation succession without irrigation, fertilization or other artificial disturbances. In the artificial restoration method, the farmland was planted with black locust (Robinia pseudoacacia L.) and watered and cultivated for the first two years. Three soil physical properties (i.e., soil moisture, bulk density and aggregation) were investigated under the two vegetation restoration methods. The results showed that the soil moisture and soil bulk density were higher under artificial restoration than under natural restoration within the first three years of vegetation restoration. By the fourth year, the soil moisture and soil bulk density were higher under natural restoration than under artificial restoration. For the stability of soil aggregates?>?0.25 mm, the soil aggregates in the 0-20 cm soil layer were more stable under artificial restoration than under natural restoration, while the results were the opposite for the 40-60 cm soil layer. Overall, the soil physical properties were continuously improved during the restoration of vegetation on abandoned farmland. In choosing between vegetation restoration methods, natural restoration is preferable to artificial restoration, but artificial intervention is needed during the first three years.     

Beidou satellite maneuver thrust force estimation for precise orbit determination

Beidou satellites, especially geostationary earth orbit (GEO) and inclined geosynchronous orbit (IGSO) satellites, need to be frequently maneuvered to keep them in position due to various perturbations. The satellite ephemerides are not available during such maneuver periods. Precise estimation of thrust forces acting on satellites would provide continuous ephemerides during maneuver periods and could significantly improve orbit accuracy immediately after the maneuver. This would increase satellite usability for both real-time and post-processing applications. Using 1 year of observations from the Multi-GNSS Experiment network (MGEX), we estimate the precise maneuver periods for all Beidou satellites and the thrust forces. On average, GEO and IGSO satellites in the Beidou constellation are maneuvered 12 and 2 times, respectively, each year. For GEO satellites, the maneuvers are mainly in-plane, while out-of-plane maneuvers are observed for IGSO satellites and a small number of GEO satellites. In most cases, the Beidou satellite maneuver periods last 15–25 min, but can be as much as 2 h for the few out-of-plane maneuvers of GEO satellites. The thrust forces acting on Beidou satellites are normally in the order of 0.1–0.7 mm/s². This can cause changes in velocity of GEO/IGSO satellites in the order of several decimeters per second. In the extreme cases of GEO out-of-plane maneuvers, very large cross-track velocity changes are observed, namely 28 m/s, induced by 5.4 mm/s² thrust forces. Also, we demonstrate that by applying the estimated thrust forces in orbit integration, the orbit errors can be estimated at decimeter level in along- and cross-track directions during normal maneuver periods, and 1–2 m in all the orbital directions for the enormous GEO out-of-plane maneuver.     

高分辨率模式雷达回波预报能力分析

利用2018年7—8月GRAPES_3 km、东北短临(WRFRUC)高分辨率模式综合雷达回波预报数据和辽宁省SWAN雷达组合反射率(MCR)实况,基于邻域法FSS评分指数,分析模式在台风北上和副热带高压边缘暴雨过程中的雷达回波预报能力。结果表明:两家模式在不同降水过程中对小阈值雷达回波有较好的预报技巧,随着回波量级增大,模式预报FSS逐渐减小,雷达回波55 dBz时,FSS甚至为0。当邻域半径是3时,35 dBz以下的回波预报中GRAPES模式在台风北上暴雨中的预报技巧低于副热带高压边缘,35 dBz则相反。WRFRUC模式始终表现为台风北上暴雨中预报较好。当邻域半径9时,WRFRUC模式在台风暴雨中的FSS评分高于GRAPES模式,GRAPES模式在副热带高压暴雨中的FSS评分始终高于WRFRUC模式。GRAPES和WRFRUC模式的最大FSS评分技巧均出现在邻域半径是11时,分别为0.239和0.195。GRAPES模式中FSS评分在12 h逐小时预报中前3个时次较强,WRFRUC模式则表现为中间时次强,两头弱。     

区域性中心城市辐射力及其评价--以郑州市为例

文章以郑州市为例,主要研究了区域性中心城市辐射力指标体系,采用层次分析法对所研究指标进行了赋值。以此为基础,用裂点法对郑州与周边相邻、相关城市的不同城市要素相互作用的范围进行了分析。找出了郑州作为区域性中心城市的影响区域、发展优势和不足,并就提高郑州辐射力的途径、措施进行了研究。