The concept of travelling bedload and its consequences for bedload computation in mountain streams

In bedload transport modelling, it is usually presumed that transported material is fed by the bed itself. This may not be true in some mountain streams where the bed can be very coarse and immobile for the majority of common floods, whereas a finer material, supplied by bed‐external sources, is efficiently transported during floods, with marginal morphological activities. This transport mode was introduced in an earlier paper as ‘travelling bedload’. It could be considered an extension of the washload concept of suspension, applied to bedload transport in high‐energy, heavily armoured streams. Since this fine material is poorly represented in the bed surface, standard surface‐based approaches are likely to strongly underestimate the true transport in such streams. This paper proposes a simple method to account for travelling bedload in bedload transport estimations. The method is tested on published datasets and on a typical Alpine stream, the Roize (Voreppe, France). The results, particularly on active streams that experience greater transport than expected from the grain sizes of their bed material, reinforce the necessity of accounting for the ‘travelling bedload concept’ in bedload computation. The method relevance is discussed regarding varying flood magnitudes, geomorphic responses and eventual anthropic origin of the ‘travelling bedload’ phenomena. To conclude, this paper considers how to compute bedload transport for a wide range of situations, ranging from sediment‐starved cases to the general mobile bed alluvial case, including the intermediate situation of external source supply on armoured bed. Copyright © 2017 John Wiley & Sons, Ltd.     

A seasonal dipolar eddy near Ras Al Hamra (Sea of Oman)

Trajectories and hydrological data from two Argo floats indicate that warm and salty water at 200–300-m depths was ejected from the coast of Oman, near Ras al Hamra, in spring 2008, 2011, and 2012. This warm and salty water, Persian Gulf Water (PGW), once ejected from the coast, recirculated cyclonically in the western Sea of Oman, but also flowed eastward along the Iranian and Pakistani coasts. There, it was expelled seaward by mesoscale eddies as shown by other float data. Seasonal maps of salinity were computed from all available Argo floats; they showed that, in spring, PGW is present in the middle and north of the Sea of Oman, contrary to fall, when the salinity maxima lie southeast of Ras al Hadd. The ejection of PGW from Ras al Hamra is related here to the influence of a mesoscale dipolar eddy which often appears near this cape in spring. The time-averaged and empirical orthogonal functions of altimetric maps over 11 years for this season confirm the frequent presence and the persistence of this feature. From surface currents and hydrology, deep currents were computed via thermal wind balance, and the associated shear and strain fields were obtained. This deformation field is intense near Ras al Hamra, with an offshore direction. This flow structure associated with the mesoscale dipole explains PGW ejection from the coast. This observation suggests that PGW distribution in the Northern Arabian Sea can be strongly influenced by seasonal mesoscale eddies.     

Do paleoclimate proxies agree? A test comparing 19 late Holocene climate and sea‐ice reconstructions from Icelandic marine and lake sediments

Geochemical, mineralogical and biological indicators preserved in sediments are widely used to reconstruct past climate change, but proxies differ in the degree to which their utility as climate indicators has been validated via laboratory experiments, modern spatial calibrations, or down‐core comparisons with instrumental climate data. Multi‐proxy studies provide another means of evaluating interpretations of proxies. This paper presents a multi‐proxy assessment comparing 19 sub‐centennially resolved late Holocene proxy records, covering the period 300–1900 AD, from seven Icelandic marine and lacustrine core sites. We employ simple statistical comparisons between proxy reconstructions to evaluate their correlations over time and, ultimately, their utility as proxies for regional climate. Proxies examined include oxygen isotopic composition of benthic and planktonic foraminifera, abundance of the sea‐ice biomarker IP₂₅, allochthonous quartz in marine sediments (a proxy for drift ice around Iceland), marine carbonate abundance, total organic carbon concentration, chironomid assemblages, lacustrine biogenic silica and carbon/nitrogen ratios in lake sediments. Most of the examined proxy records, including temperature and sea‐ice proxies, correlate strongly with each other over multi‐centennial timescales, and thus do appear to record changes in regional climate. Copyright © 2011 John Wiley & Sons, Ltd.     

Towards Stochastic Time-Varying Geological Modeling

The modeling of subsurface geometry and properties is a key element to understand Earth processes and manage natural hazards and resources. In this paper, we suggest this field should evolve beyond pure data fitting approaches by integrating geological concepts to constrain interpretations or test their consistency. This process necessarily calls for adding the time dimension to 3D modeling, both at the geological and human time scales. Also, instead of striving for one single best model, it is appropriate to generate several possible subsurface models in order to convey a quantitative sense of uncertainty. Depending on the modeling objective (e.g., quantification of natural resources, production forecast), this population of models can be ranked. Inverse theory then provides a framework to validate (or rather invalidate) models which are not compatible with certain types of observations. We review recent methods to better achieve both stochastic and time-varying geomodeling and advocate that the application of inversion should rely not only on random field models, but also on geological concepts and parameters.     

Geodynamic evolution of a forearc rift in the southernmost Mariana Arc

The southernmost Mariana forearc stretched to accommodate opening of the Mariana Trough backarc basin in late Neogene time, erupting basalts at 3.7–2.7 Ma that are now exposed in the Southeast Mariana Forearc Rift (SEMFR). Today, SEMFR is a broad zone of extension that formed on hydrated, forearc lithosphere and overlies the shallow subducting slab (slab depth ≤ 30–50 km). It comprises NW–SE trending subparallel deeps, 3–16 km wide, that can be traced ≥ ∼30 km from the trench almost to the backarc spreading center, the Malaguana‐Gadao Ridge (MGR). While forearcs are usually underlain by serpentinized harzburgites too cold to melt, SEMFR crust is mostly composed of Pliocene, low‐K basaltic to basaltic andesite lavas that are compositionally similar to arc lavas and backarc basin (BAB) lavas, and thus defines a forearc region that recently witnessed abundant igneous activity in the form of seafloor spreading. SEMFR igneous rocks have low Na₈, Ti₈, and Fe₈, consistent with extensive melting, at ∼23 ± 6.6 km depth and 1239 ± 40°C, by adiabatic decompression of depleted asthenospheric mantle metasomatized by slab‐derived fluids. Stretching of pre‐existing forearc lithosphere allowed BAB‐like mantle to flow along the SEMFR and melt, forming new oceanic crust. Melts interacted with pre‐existing forearc lithosphere during ascent. The SEMFR is no longer magmatically active and post‐magmatic tectonic activity dominates the rift.     

Impacts of a large Sahelian city on groundwater hydrodynamics and quality: example of Niamey (Niger)

The management of groundwater resources is very important in the semiarid Sahel region, which is experiencing rapid urban development. Impacts of urbanization on groundwater resources were investigated in the unconfined aquifer of the Continental Terminal beneath the city of Niamey, Niger, using water level and chemical data. Hydrodynamic and chemical changes are best described by a combination of factors including the historical development of the city, current land use, water-table depth and topography. Seasonal groundwater recharge occurs with high spatial variability, as indicated by water-level monitoring in all wells, but there was no interannual trend over the 5-year study period. Groundwater salinity shows high spatial variability and a minor rising trend. The highest salinity is in the old city centre, with Na–NO₃ dominant, and it increases seasonally with recharge. Salinity is much lower and more variable in the suburbs (Ca–HCO₃, Ca–NO₃, and Na–NO₃ dominant). Nitrate is the main ionic contaminant and is seasonally or permanently above the international guidelines for drinking water quality in 36 % of sampled wells, with a peak value of 112 mg L^?1 NO₃–N (8 meq L^?1). Comparison of urban and rural sites indicates a long-term increase in groundwater recharge and nitrate enrichment in the urban area with serious implications for groundwater management in the region.     

Mobility of metals in nickel mine spoil materials

An understanding of the biogeochemical behaviour of metals in mine spoil materials is a prerequisite to rehabilitate Ni mining sites. The objective of this study was to characterize the fate of metals in different Ni ore spoil materials as influenced by hydrological conditions and fertilisation practices. In tropical ultramafic complexes, the different stages of lateritic weathering lead to two types of ores, and therefore, to two spoil types. They are mainly either a clay-rich saprolite, so-called “garnierite”, enriched in phyllosilicates, or a limonitic material, enriched in Fe oxides. Lysimeter columns were designed to monitor leaching waters through both spoil materials. The garnieritic spoil released higher concentrations of Mg (mean = 2.25 mg L⁻¹), Ni (0.39 mg L⁻¹) and Cr (1.19 mg L⁻¹) than the limonitic spoil (Mg = 0.5 mg L⁻¹; Ni = 0.03 mg L⁻¹ and Cr = 0.25 mg L⁻¹). Chromium was mainly in an anionic form in leaching solutions. As exchangeable pools of Cr(VI) in limonite (980 mg kg⁻¹ of KH₂PO₄-extractable Cr) are considerable its release in water may still occur in the case of a pH increase. In mixed spoil, metal concentrations were almost as low as in the limonitic one. The effect of mineral-N fertilisation was a strong release of cations (Ni, Mg) into the leachate. Phosphate amendment did not affect the soil solution composition under experimental conditions.     

The effect of drawdown on suspended solids and phosphorus export from Columbia Lake,Waterloo, Canada

This study examines the effect of drawdown on the timing and magnitude of suspended solids and associated phosphorus export from a 12 ha reservoir located in an urbanized watershed in southern Ontario, Canada. Water level in Columbia Lake was lowered by 1·15 m over a 2‐week period in November 2001. The total phosphorus (TP) concentrations ranged from 63 to 486 µg L^?1 in Columbia Lake and 71 to 373 µg L^?1 at its outflow. All samples exceeded the Provincial Water Quality Objective of 30 µg TP L^?1. Outflow concentrations of suspended solids and TP increased significantly with decreasing lake level and were attributed to the resuspension of cohesive bottom sediments that occurred at a critical threshold lake level (0·65 m below summer level). Suspended solids at the outflow consisted of flocculated cohesive materials with a median diameter (D₅₀) of c. 5 µm. Particulate organic carbon accounted for 8·5% of the suspended solids export by mass. A total mass of 18·5 t of suspended solids and 62·6 kg TP was exported from Columbia Lake, which represents a significant pulse of sediment‐associated P to downstream environments each autumn during drawdown. The downstream impacts of this release can be minimized if the water level in Columbia Lake is lowered no more than 0·5 m below summer levels. Copyright © 2004 John Wiley & Sons, Ltd.     

Anisotropy of hydrogen diffusion in tourmaline

Hydrogen-deuterium exchange in tourmaline single crystals of elbaite composition from Nepal has been studied at 1 atm and at temperatures between 973 and 1073 K. H/D ratios were determined after each annealing experiment using micro FTIR-spectroscopy. Diffusion coefficients (10⁻¹⁶-10⁻¹⁵ m² s⁻¹) were determined by fitting the data using a 3D numerical simulation. The rate of diffusion is two to three times faster along the c direction than along directions parallel to the basal plane. The diffusion laws are, respectively: