Sulfide and platinum mineralization in the Merensky Reef: evidence from hydrous silicates and fluid inclusions

The base metal sulfides of the Merensky Reef are associated with hydrous silicates and intense deuteric hydrous alteration of cumulus and postcumulus silicates. Biotite and phlogopite crystallized in the vicinity of sulfides from a volatile-enriched highly fractionated intercumulus melt. Amphibole, chlorite, and talc are later alteration phases of cumulus pyroxene and intercumulus plagioclase. Biotite is often accompanied by zircon, rutile, and quartz. Accessory quartz hosts a complex suite of H₂O-NaCl-(CaCl₂)-CO₂-CH₄ fluid inclusions which have thus far not been described from the Merensky Reef. The earliest fluid inclusion compositions are NaCl-(H₂O) with less than 10 vol.% water; CO₂ coexisting with a halite daughter crystal and brine; and polyphase inclusions with up to six daughter and accidental phases and high contents of divalent cations. The maximum trapping temperature is around 730° C at 4 to 5 kb pressure. Later inclusion generations are H₂O-NaCl, CO₂-H₂O, and pure CO₂ and CH₄. The presence of Cl-rich fluids during the intercumulus stage of the crystallizing Merensky Reef is directly related to the mode of sulfide precipitation. Prior to sulfide unmixing in a hydrous magma sulfur is likely to be present as H₂S. Sulfur saturation causes reaction of H₂S with oxides of the silicate melt to form a sulfide melt plus water. During reaction the magma is enriched in water until a separate fluid unmixes. It carries all compounds with high fluid/melt partition coefficients, as well as metals capable of forming OH- and Cl-complexes. Precious metals are assumed to have fractionated into the Cl-rich fluid as Cl-complexes rather than being dissolved in the sulfide melt. During the cooling evolution of the fluid the precious elements precipitate around the periphery of sulfide melt droplets. The model proposed explains the distribution pattern of platinum-group minerals in the Merensky Reef better than any orthomagmatic mineralization concept offered so far.     

A comparison of two avalanche-models with exemplary avalanches of Tyrol and Switzerland and the effects to hazard zoning

For the purposes of a thesis at the Institute of avalanche and torrent control at the university of agriculture in Vienna a comparison of two avalanche-models, a hydraulic one from Voellmy/Salm/Gubler and a statistical one from Laatsch/Zenke/Dankerl with exemplary exactly known avalanches of Tyrol and Switzerland was started in 1993. The result of this work was that both models failed by the calculation of avalanches with high recurrence intervals (over 300 years). For the calculation of avalanches with recurrence intervals under 300 years the results of both models are regular. The conclusion is that a combination of two models i.e. a hydraulic one improved by statistical calculations will be the best.     

Volcanic hazards from Bezymianny- and Bandai-type eruptions

Major slope failures are a significant degradational process at volcanoes. Slope failures and associated explosive eruptions have resulted in more than 20 000 fatalities in the past 400 years; the historic record provides evidence for at least six of these events in the past century. Several historic debris avalanches exceed 1 km³ in volume. Holocene avalanches an order of magnitude larger have traveled 50–100 km from the source volcano and affected areas of 500–1500 km². Historic eruptions associated with major slope failures include those with a magmatic component (Bezymianny type) and those solely phreatic (Bandai type). The associated gravitational failures remove major segments of the volcanoes, creating massive horseshoe-shaped depressions commonly of caldera size. The paroxysmal phase of a Bezymianny-type eruption may include powerful lateral explosions and pumiceous pyroclastic flows; it is often followed by construction of lava dome or pyroclastic cone in the new crater. Bandai-type eruptions begin and end with the paroxysmal phase, during which slope failure removes a portion of the edifice. Massive volcanic landslides can also occur without related explosive eruptions, as at the Unzen volcano in 1792.The main potential hazards from these events derive from lateral blasts, the debris avalanche itself, and avalanche-induced tsunamis. Lateral blasts produced by sudden decompression of hydrothermal and/or magmatic systems can devastate areas in excess of 500km² at velocities exceeding 100 m s^–1. The ratio of area covered to distance traveled for the Mount St. Helens and Bezymianny lateral blasts exceeds that of many pyroclastic flows or surges of comparable volume. The potential for large-scale lateral blasts is likely related to the location of magma at the time of slope failure and appears highest when magma has intruded into the upper edifice, as at Mount St. Helens and Bezymianny.Debris avalanches can move faster than 100 ms^–1 and travel tens of kilometers. When not confined by valley walls, avalanches can affect wide areas beyond the volcano's flanks. Tsunamis from debris avalanches at coastal volcanoes have caused more fatalities than have the landslides themselves or associated eruptions. The probable travel distance (L) of avalanches can be estimated by considering the potential vertical drop (H). Data from a catalog of around 200 debris avalanches indicates that the H/L rations for avalanches with volumes of 0.1–1 km³ average 0.13 and range 0.09–0.18; for avalanches exceeding 1 km³, H/L ratios average 0.09 and range 0.5–0.13.Large-scale deformation of the volcanic edefice and intense local seismicity precede many slope failures and can indicate the likely failure direction and orientation of potential lateral blasts. The nature and duration of precursory activity vary widely, and the timing of slope faliure greatly affects the type of associated eruption. Bandai-type eruptions are particularly difficult to anticipate because they typically climax suddenly without precursory eruptions and may be preceded by only short periods of seismicity.     

U-Pb dating of an early paleozoic bimodal magmatism in the french Massif Central and of its further metamorphic evolution

In the Marvejols area (Southern french Massif Central), the gneissic Marvejols supergroup is overthrust on the metasedimentary “Série du Lot”, deposited in part prior to 540 Ma. The allochtonous terranes are characterized by the occurrence of a leptyno-amphibolitic group, a complex association of mafic and felsic rocks of igneous and sedimentary derivation. A 480±10 Ma age has been obtained by U-Pb dating of zircons, for the crystallization of both mafic and felsic meta-igneous rocks. These rocks were emplaced during an important extensional tectonics. Relics of eclogites, pyrigarnites, coronite gabbros and HP-trondhjemites are clear evidence for a further HP-HT event dated at 415±6 Ma on zircons from a HP trondhjemite. Subsequently, the Marvejols supergroup underwent an amphibolite facies metamorphism with incipient mobilization dated at 345±10 Ma. Rifting and thinning of the continental crust in Cambro-Ordovician times appears to be a major geodynamic feature which could account for the thermal events often referred to the “Caledonian” orogeny. The Silurian (415 Ma) age of the HP episode is clearly older than the main Variscan tectonometamorphic event; it is in agreement with Rb-Sr dating of the Moldanubian granulites and with some radiometric data from Southern Brittany (France). These results point to a compressive phase, probably in a subduction context, in view of the high pressures reached (15–20 Kb), after the Cambro-Ordovician distensive phase. The main final tectono-metamorphic paroxysm (blocking of subduction process and continental collison ?) is not prior to the end of Devonian (340–350 Ma) and is related to the Variscan orogeny s.s     

On the relationship of thunderstorm ice hydrometeor characteristics and total lightning measurements

Satellite-borne and ground-based devices for the detection of lightning offer the opportunity to explore relationships–on all significant scales up to global–between lightning frequency, f, and other thundercloud parameters. Calculations predict that f is proportional to the product of the downflux p of solid precipitation and the upward mass flux, I, of ice crystals. This prediction has received support from limited computational studies. The physical reasons for such a relationship are explained in terms of the paramount role of ice in the electrification of thunderstorms. Herein, this prediction is subjected to further, preliminary examination through analysis of lightning and dual-polarimetric radar data collected during the STERAO experiment conducted in Northern Colorado during the summer of 1996. The analysis has yielded some highly provisional support for this flux hypothesis. Computed trends of radar derived hydrometeor fractions of solid precipitation and small ice show correlation to the total lightning frequency and raise the possibility of determining values of p and/or I from lightning measurements.It is shown that the extent to which the observed correlations between f and both solid precipitation and small ice trends are or are not strong can provide an indication as to whether the lightning activity is limited by the available concentrations of precipitating or non-precipitating ice in the upper regions of the charging zone of the thundercloud, where most of the charge transfer occurs. It is demonstrated that the most accurate determinations of precipitation rate p from measurements of lighting frequency f are likely to be for conditions where the field-growth is limited by the availability of graupel pellets. It is shown that the simultaneous time variations of f and solid precipitation trends of the type obtained in the STERAO experiment could enable us to determine the nature of the dominant glaciation process operative in the thunderclouds studied.     

Simultaneous iterative time-domain sparse deconvolution to teleseismic receiver functions

In this paper, we present a new approach to estimate high-resolution teleseismic receiver functions using a simultaneous iterative time-domain sparse deconvolution. This technique improves the deconvolution by using reweighting strategies based on a Cauchy criterion. The resulting sparse receiver functions enhance the primary converted phases and its multiples. To test its functionality and reliability, we applied this approach to synthetic experiments and to seismic data recorded at station ABU, in Japan. Our results show Ps conversions at approximately 4.0 s after the primary P onset, which are consistent with other seismological studies in this area. We demonstrate that the sparse deconvolution is a simple, efficient technique in computing receiver functions with significantly greater resolution than conventional approaches.