Decoupling between the middle and upper crust during transpression-related lateral flow: Variscan evolution of the Aston gneiss dome (Pyrenees, France)

We present a structural, AMS, microstructural and kinematic study of the Aston gneiss dome (French Pyrenees), which consists of a core made up of orthogneiss and paragneiss intruded by numerous sills of Carboniferous peraluminous granite. The orthogneiss corresponds to a former Ordovician granitic laccolith. Four Variscan events have been evidenced in this gneiss dome: (i) D1 deformation observed only as relics in the orthogneisses and their country-rocks located above the sillimanite isograd, and characterized by a NS to NE–SW non coaxial stretch associated to top to the south motions (NS convergence); (ii) D2-a deformation observed in the orthogneisses and their country-rocks, mainly migmatitic paragneisses, located below the sillimanite isograd and in the peraluminous granites whatever their structural level, and characterized by an EW to N120°E stretch associated to a top to the east flat shearing (lateral flow in the hot middle crust in a transpressive regime); (iii) D2-b deformation characterized by EW-trending megafolds corresponding to the domes in the middle crust and by EW-trending tight folds with subvertical axial planes in the metasedimentary upper crust; (iv) subvertical medium-temperature mylonitic bands developed by the end of the transpression.The Aston massif is a good example of decoupling between a cold upper crust and a hotter middle crust overheated by a thermal event originated in the upper mantle. This decoupling allowed the lateral flow of the migmatitic middle crust along a direction at high angle with respect to the more or less NS-trending direction of convergence. We suggest that the HT-LP metamorphism developed before the formation of the domes during D2-a, coevally with the emplacement of numerous sills of peraluminous granite, whereas the emplacement of the large calc-alkaline plutons in the upper crust occurred by the end of D2-b. Our data invalidate the previous geodynamical models based on either early or late extensional regime to explain the development of the HT-LP metamorphism. This new interpretation of the dynamics of the Variscan crust of the Pyrenees is consistent with recent studies conducted in Archaean and Palaeoproterozoic hot continental crusts having undergone oblique convergence, and characterized by a competition between vertical thickening and lateral flow induced by the important rheological contrast between two thermally different levels.     

Identification of a sulfide derivative with a bicyclic hydrocarbon skeleton related to squalene. Part II: synthesis of a S-spiro-like dithiolane triterpenoid

A sulfide with a bicyclic squalene hydrocarbon skeleton present in sediments from various depositional settings and of different geological age has been identified by synthesis of a reference compound. In contrast to previous expectations [cf. Schouten, S., Sinninghe Damsté, J.S., de Leeuw, J.W., 1995. A novel triterpenoid carbon skeleton in immature sulphur-rich sediments. Geochimica et Cosmochimica Acta 59, 953–958; Gug, S., Schaeffer, P., Adam, P., Klein, S., Motsch, E., Albrecht, P., 2009. Identification of a sulfide derivative with a bicyclic hydrocarbon skeleton related to squalene. Part I: Synthesis of a dithiane triterpenoid. Organic Geochemistry 40, 876–884.], this sulfide bears two “S-spiro type“ thiolane moities, but not the two thiochromane moieties originally envisaged. The synthesis resulted in the formation of a complex isomeric mixture of compounds, all co-eluting in gas chromatography (GC) in the form of one broad peak, as is the case with the geochemical compound. The spiro-type sulfide was formed by intramolecular sulfurization of a polyunsaturated bicyclic squalene derivative of unknown biological origin. The presence of this sulfide in a number of Triassic to Miocene marine sediments from various and contrasting depositional settings (upwelling environments, shallow continental platforms, lagoonal sub-basins, hypersaline environments), all characterized by strongly anoxic conditions, but with or without photic zone anoxia, indicates that the microorganisms biosynthesizing the precursor bicyclic squalene occupy diverse ecological niches.     

NanoSIMS analysis of organic carbon from the Tissint Martian meteorite: Evidence for the past existence of subsurface organic‐bearing fluids on Mars

Two petrographic settings of carbonaceous components, mainly filling open fractures and occasionally enclosed in shock‐melt veins, were found in the recently fallen Tissint Martian meteorite. The presence in shock‐melt veins and the deuterium enrichments (δD up to +1183‰) of these components clearly indicate a pristine Martian origin. The carbonaceous components are kerogen‐like, based on micro‐Raman spectra and multielemental ratios, and were probably deposited from fluids in shock‐induced fractures in the parent rock of Tissint. After precipitation of the organic matter, the rock experienced another severe shock event, producing the melt veins that encapsulated a part of the organic matter. The C isotopic compositions of the organic matter (δ¹³C = ?12.8 to ?33.1‰) are significantly lighter than Martian atmospheric CO₂ and carbonate, providing a tantalizing hint for a possible biotic process. Alternatively, the organic matter could be derived from carbonaceous chondrites, as insoluble organic matter from the latter has similar chemical and isotopic compositions. The presence of organic‐rich fluids that infiltrated rocks near the surface of Mars has significant implications for the study of Martian paleoenvironment and perhaps to search for possible ancient biological activities on Mars.     

Distribution and transfer of trace elements in the Western Mediterranean

Results concerning the concentration of cadmium and lead in Mediterranean waters collected during the 2nd PHYCEMED cruise (Oct. 1983) are discussed. Sampling has been performed at seven stations in the Western Mediterranean Basin, two in the Strait of Gibraltar and the near Atlantic, two in the Sicily Strait and the Eastern Basin.In the Western Basin the observations are in fair agreement with those of PHYCEMED 1. Cadmium has a fairly homogeneous distribution vertically as well as from one station to another, with an average concentration of 8 ng l⁻¹; while lead shows a slight but continuous decrease in concentrations with depth (from at least 50 ng l⁻¹ in surface waters to 20 or 25 ng l⁻¹ at depth). On the other hand, at the basin boundaries, where waters from different origins are present, vertical distributions appear very different. On the basis of calculated water budgets it can be estimated that the Mediterranean Sea discharges about 200 t y⁻¹ of cadmium and about 250 t y⁻¹ of lead into the Atlantic Ocean while 1000 t y⁻¹ of lead are transferred from the Western to the Eastern Basin.     

New Methods to Estimate 2D Water Level Distributions of Dynamic Rivers

River restoration measures are becoming increasingly popular and are leading to dynamic river bed morphologies that in turn result in complex water level distributions in a river. Disconnected river branches, nonlinear longitudinal water level profiles and morphologically induced lateral water level gradients can evolve rapidly. The modeling of such river‐groundwater systems is of high practical relevance in order to assess the impact of restoration measures on the exchange flux between a river and groundwater or on the residence times between a river and a pumping well. However, the model input includes a proper definition of the river boundary condition, which requires a detailed spatial and temporal river water level distribution. In this study, we present two new methods to estimate river water level distributions that are based directly on measured data. Comparing generated time series of water levels with those obtained by a hydraulic model as a reference, the new methods proved to offer an accurate and faster alternative with a simpler implementation.     

阿尔金断裂西段首期GPS观测资料处理及初步结果

本文介绍了中国科学院青藏高原研究所在阿尔金断裂西段进行GPS观测的剖面布设和首期观测情况.利用GAMIT/GLOBK软件对首期观测数据进行了处理,并将结果归算到区域参考框架下.GAMIT计算得到的"准观测值"均满足所须精度,其中单天解标准化均方差小于0.3,基线的平均相对精度为1.8×10-9.GLOBK在区域参考框架...     

Generation of 3D Spatially Variable Anisotropy for Groundwater Flow Simulations

Sedimentary units generally present anisotropy in their hydraulic properties, with higher hydraulic conductivity along bedding planes, rather than perpendicular to them. This common property leads to a modeling challenge if the sedimentary structure is folded. In this paper, we show that the gradient of the geological potential used by implicit geological modeling techniques can be used to compute full hydraulic conductivity tensors varying in space according to the geological orientation. For that purpose, the gradient of the potential, a vector normal to the bedding, is used to construct a rotation matrix that allows the estimation of the 3D hydraulic conductivity tensor in a single matrix operation. A synthetic 2D cross section example is used to illustrate the method and show that flow simulations performed in such a folded environment are highly influenced by this rotating anisotropy. When using the proposed method, the streamlines follow very closely the folded formation. This is not the case with an isotropic model.     

Identification of Groundwater Parameters Using an Adaptative Multiscale Method

The identification of groundwater parameters in heterogeneous systems is a major challenge in groundwater modeling. Flexible parameterization methods are needed to assess the complexity of the spatial distributions of these parameters in real aquifers. In this article, we introduce an adaptative parameterization to identify the distribution of hydraulic conductivity within the large‐scale (4400 km²) Upper Rhine aquifer. The method is based on adaptative multiscale triangulation (AMT) coupled with an inverse problem procedure that identifies the parameters' distributions by reducing the error between measured and simulated heads. The AMT method has the advantage of combining both zonation and interpolation approaches. The AMT method uses area‐based interpolation rather than an interpolation based on stochastic features. The method is applied to a standard 2D groundwater model that takes into account the interactions between the aquifer and surface water bodies, groundwater recharge, and pumping wells. The simulation period covers 204 months, from January 1986 to December 2002. Recordings at 109 piezometers are used for model calibration. The simulated heads are globally quite accurate and reproduce the main dynamics of the system. The local hydraulic conductivities resulting from the AMT method agree qualitatively with existing local experimental observations across the Rhine aquifer.