Geochemistry and zircon U-Pb geochronology of Aligoodarz granitoid complex, Sanandaj-Sirjan Zone, Iran

The Aligoodarz granitoid complex (AGC) is located in the Sanandaj-Sirjan Zone (SSZ), western Iran and consists of quartz-diorites, granodiorites and subordinate granites. Whole rock major and trace element data mostly define linear trends on Harker diagrams suggesting a cogenetic origin of the different rock types. (⁸⁷Sr/⁸⁶Sr)_i and εNd_t ratios are in the ranges 0.7074-0.7110 and −3.56 to −5.50, respectively. The trace elements and Sr-Nd isotopic composition suggest that the granitoids from the AGC are similar to crustal derived I-type granitoids of continental arcs. The whole rock suite was produced by assimilation and fractional crystallization starting from a melt with intermediate composition likely possessing a mantle component. In situ zircon U-Pb data on the granites with LA-ICP-MS yield a crystallization age of ∼165 Ma. Inherited grains spanning in age from ∼180 Ma up to 2027 Ma were also found and confirm that assimilation of country rock has occurred.Chemical and chronological data on the AGC were compared with those available for other granitoid complexes of the central SSZ (e.g., Dehno, Boroujerd and Alvand). The comparison reveals that in spite of the different origins that have been proposed, all these granitoid complexes are likely genetically related. They share many chemical features and are derived from crustal melts with minor differences. Alvand granites have the most peculiar compositions most likely related to the presence of abundant pelitic component. All these intrusions are coeval and reveal the presence of an extensive magmatic activity in the central sector of the SSZ during middle Jurassic.     

Separate lead isotope analyses of leachate and residue rock fractions: implications for metal source tracing in ore deposit studies

Separate lead isotope analyses of leachate and residue fractions are applied to a broad spectrum of rocks commonly investigated in metallogenic studies. Resulting data highlight a systematic behavior of leachate and residue fractions with respect to lead isotope compositions, which essentially depends on the mineralogical composition of the rock. Granitoid and high-grade metamorphic rocks have residue compositions virtually identical to common lead. In contrast, low-grade metasedimentary rocks may have residue compositions swamped by radiogenic lead of leach-resistant zircons. Mafic magmatic rocks have residues that are often more radiogenic than leachates, depending on the ratio of leach-refractory zircons to common lead in the residual fraction of these rocks. Separate leachate and residue analyses of source rocks provide two lead isotope end members whose mixture may represent lead with the appropriate ore fluid composition. Our leaching experiments indicate that hot acid solutions (and by inference hydrothermal fluids) preferentially leach radiogenic lead from medium- to high-grade metamorphic and granitoid rocks, whereas they preferentially leach common lead from low-grade metasedimentary and mafic magmatic rocks. The method presented in this study provides a reliable alternative to other methods (i.e., age-correction of bulk-rock compositions) for the determination of the common lead signature of felsic to intermediate magmatic rocks. This may be preferable to age-corrected bulk-rock analyses, where ages to apply for corrections of bulk-rock data are not known or where moderately to highly altered rocks must be used. Case studies of orogenic gold and MVT districts of Peru (Pataz and San Vicente, respectively) show that separate leachate and residue lead isotope analyses carried out systematically on whole rocks allow a more thorough evaluation of metal source reservoirs than does the standard method of age-corrected or uncorrected bulk-rock analyses.     

卫星遥感结合地面观测估算非均匀地表区域能量通量

卫星遥感在研究非均匀陆面上地－气间能量和水循环过程时有其独到的作用。文中介绍了一种利用ＬＡＮＤＳＡＴＴＭ资料进行非均匀陆面上区域能量平衡研究的参数化方案。并以夏季和深秋两个景的ＴＭ资料为个例,结合“黑河实验”（ＨＥＩＦＥ）期间的地面观测资料分析了实验区非均匀陆面上地表特征参数及能量平衡各分量的区域分布及季节差异,同时将所得的结果与地面观测的“真值”作了比较,所得的这些结果是基本可信的。这种方法仍然处于发展的初始阶段,对此也进行了讨论。     

New insights on the origin of troctolites from the breakaway area of the Godzilla Megamullion (Parece Vela back‐arc basin): The role of melt‐mantle interaction on the composition of the lower crust

The troctolites and olivine‐gabbros from the Dive 6 K‐1147 represent the most primitive gabbroic rocks collected at the Godzilla Megamullion, a giant oceanic core complex formed at an extinct spreading segment of the Parece Vela back‐arc basin (Philippine Sea). Previous investigations have shown that these rocks have textural and major elements mineral compositions consistent with a formation through multistage interaction between mantle‐derived melts and a pre‐existing ultramafic matrix. New investigations on trace element mineral compositions basically agree with this hypothesis. Clinopyroxenes and plagioclase have incompatible element signatures similar to that of typical‐MORB. However, the clinopyroxenes show very high Cr contents (similar to those of mantle clinopyroxene) and rim having sharply higher Zr/REE ratios with respect to the core. These features are in contrast with an evolution constrained by fractional crystallization processes, and suggest that the clinopyroxene compositions are controlled by melt‐rock interaction processes. The plagioclase anorthite versus clinopyroxene Mg#[Mg/(Mg + Fe^Tot)] correlation of the Dive 6 K‐1147 rocks shows a trend much steeper than those depicted by other oceanic gabbroic sections. Using a thermodynamic model, we show that this trend is reproducible by fractionation of melts assimilating 1 g of mantle peridotite per 1 °C of cooling. This model predicts the early crystallization of high Mg# clinopyroxene, consistent with our petrological observation. The melt‐peridotite interaction process produces Na‐rich melts causing the crystallization of plagioclase with low anorthite component, typically characterizing the evolved gabbros from Godzilla Megamullion.     

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.     

黑河实验区地表净辐射区域分布及季节变化

利用卫星遥感信息和地面观测资料，分析研究黑河实验区地表净辐射的区域分布及季节变化特征。结果表明，卫星遥感结合地面观测，首先可以得到较为精确的地表反射率和地表温度分布，进而得到较为合理的地表净辐射的区域分布和季节变化特征。     

POLARIX: a pathfinder mission of X-ray polarimetry

Since the birth of X-ray astronomy, spectral, spatial and timing observation improved dramatically, procuring a wealth of information on the majority of the classes of the celestial sources. Polarimetry, instead, remained basically unprobed. X-ray polarimetry promises to provide additional information procuring two new observable quantities, the degree and the angle of polarization. Polarization from celestial X-ray sources may derive from emission mechanisms themselves such as cyclotron, synchrotron and non-thermal bremsstrahlung, from scattering in aspheric accreting plasmas, such as disks, blobs and columns and from the presence of extreme magnetic field by means of vacuum polarization and birefringence. Matter in strong gravity fields and Quantum Gravity effects can be studied by X-ray polarimetry, too. POLARIX is a mission dedicated to X-ray polarimetry. It exploits the polarimetric response of a Gas Pixel Detector, combined with position sensitivity, that, at the focus of a telescope, results in a huge increase of sensitivity. The heart of the detector is an Application-Specific Integrated Circuit (ASIC) chip with 105,600 pixels each one containing a full complete electronic chain to image the track produced by the photoelectron. Three Gas Pixel Detectors are coupled with three X-ray optics which are the heritage of JET-X mission. A filter wheel hosting calibration sources unpolarized and polarized is dedicated to each detector for periodic on-ground and in-flight calibration. POLARIX will measure time resolved X-ray polarization with an angular resolution of about 20 arcsec in a field of view of 15 × 15 arcmin and with an energy resolution of 20% at 6 keV. The Minimum Detectable Polarization is 12% for a source having a flux of 1 mCrab and 10⁵ s of observing time. The satellite will be placed in an equatorial orbit of 505 km of altitude by a Vega launcher. The telemetry down-link station will be Malindi. The pointing of POLARIX satellite will be gyroless and it will perform a double pointing during the earth occultation of one source, so maximizing the scientific return. POLARIX data are for 75% open to the community while 25% + SVP (Science Verification Phase, 1 month of operation) is dedicated to a core program activity open to the contribution of associated scientists. The planned duration of the mission is one year plus three months of commissioning and SVP, suitable to perform most of the basic science within the reach of this instrument. A nice to have idea is to use the same existing mandrels to build two additional telescopes of iridium with carbon coating plus two more detectors. The effective area in this case would be almost doubled.     

The meteoritic origin of Tutankhamun's iron dagger blade

Scholars have long discussed the introduction and spread of iron metallurgy in different civilizations. The sporadic use of iron has been reported in the Eastern Mediterranean area from the late Neolithic period to the Bronze Age. Despite the rare existence of smelted iron, it is generally assumed that early iron objects were produced from meteoritic iron. Nevertheless, the methods of working the metal, its use, and diffusion are contentious issues compromised by lack of detailed analysis. Since its discovery in 1925, the meteoritic origin of the iron dagger blade from the sarcophagus of the ancient Egyptian King Tutankhamun (14th C. BCE) has been the subject of debate and previous analyses yielded controversial results. We show that the composition of the blade (Fe plus 10.8 wt% Ni and 0.58 wt% Co), accurately determined through portable x‐ray fluorescence spectrometry, strongly supports its meteoritic origin. In agreement with recent results of metallographic analysis of ancient iron artifacts from Gerzeh, our study confirms that ancient Egyptians attributed great value to meteoritic iron for the production of precious objects. Moreover, the high manufacturing quality of Tutankhamun's dagger blade, in comparison with other simple‐shaped meteoritic iron artifacts, suggests a significant mastery of ironworking in Tutankhamun's time.     

Facies analysis of Pleistocene sediments from the Bannock Basin area: A key to the reconstruction of its tectonic evolution

Facies analysis was carried out on 21 selected cores from the Bannock area in order to investigate the relationships between sedimentation and tectonism. Bannock Basin is a large, > 3500 m (uncorrected) deep subcircular depression near the deformation front of the Mediterranean Ridge facing the Sirte Abyssal Plain. The basin is divided into several sub-basins aligned along a rim-syncline surrounding a central elevated area (salt dome?). High-density brines and anoxic sediments occupy the deepest part of the depressions.

The facies distribution is controlled by the bottom configuration in that pelagic facies typically occur on plateaus and domes, debris-flow deposits in base-of-slope settings, and turbidites in basinal settings. The facies distribution may therefore be used to reconstruct the evolution of the various parts of the rim-syncline.

Erosional gaps may be related to tectonism or may be features created by the passage of major turbiditic events.

The results of our study of the facies associations, and of the rates of sediment accumulation, indicate that the collapse of the eastern part of the rim-syncline pre-dates the collapse of the western part. The western basins are deeper and larger than the eastern ones and (unlike the latter) are aligned at the foot of a strike-slip fault with a vertical offset of at least 700 m.