Creep fracture modeling by use of continuum damage variable based on Voronoi simulation of grain boundary cavity

A new approach to creep cavitation damage is developed by combining the basic features of continuum damage mechanics and mechanism-based cavitation models. Based on a polycrystal microstructures simulated by Voronoi tessellation, an anisotropic continuum damage variable is defined, and its evolution is given by applying the mechanism-based equations of cavity nucleation and growth to each grain boundary. Macroscopic creep deformation coupled with the damage variable is calculated by damage mechanics equations. The proposed method has been applied to investigate the damage evolution under uniaxial tension and reversed shear loading conditions.     

Efficient electrochemical decomposition of perfluorocarboxylic acids by the use of a boron-doped diamond electrode

The electrochemical decomposition of environmentally persistent perfluorooctanoic acid (PFOA) was achieved by the use of a boron-doped diamond (BDD) electrode. The PFOA decomposition follows pseudo-first-order kinetics, with an observed rate constant (k₁) of 2.4 × 10^− 2 dm³ h^− 1. Under the present reaction conditions, k₁ increased with increasing current density and saturated at values over 0.60 mA cm^− 2. Therefore, the rate-limiting step for the electrochemical decomposition of PFOA was the direct electrochemical oxidation at lower current densities. In the proposed decomposition pathway, direct electrochemical oxidation cleaves the C-C bond between the C₇F₁₅ and COOH in PFOA and generates a C₇F₁₅ radical and CO₂. The C₇F₁₅ radical forms the thermally unstable alcohol C₇F₁₅OH, which undergoes F⁻ elimination to form C₆F₁₃COF. This acid fluoride undergoes hydrolysis to yield another F⁻ and the perfluorocarboxylic acid with one less CF₂ unit, C₆F₁₃COOH. By repeating these processes, finally, PFOA was able to be totally mineralized to CO₂ and F⁻. Moreover, whereas the BDD surface was easily fluorinated by the electrochemical reaction with the PFOA solution, medium pressure ultraviolet (MPUV) lamp irradiation in water was able to easily remove fluorine from the fluorinated BDD surface.     

Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

面素法加工自由曲面的研究与实验

精密制造中需要对淬硬材料的自由曲面进行精加工。本项目采用磨削中心GC,进行了高效自由曲面磨削加工的基础研究。本文提出了3维自由曲面可以分为9种类型的面素,并从几何角度分析了面素的定义方法。采用球头磨球形磨具进行面素法高效磨削加工时,需要对各类面素与球形磨具的作用状态进行解析。分析了由于加工条件和加工面形状变化,工件与球形磨具随之在接触点周速度、砂轮实际切削深度,以及磨削力的变化。分析模型与实验数值有很好的吻合。     

Dual-Mode Space-Temporal Simultaneous Processing Equalizer

A tapped delayed line adaptive array antenna (TDL-AAA) and a space-temporal simultaneous processing equalizer (ST-SPE) are proposed as simple space-temporal equalizers based on minimum mean square error (MMSE) criterion. The ST-SPE has a compact hardware with a small number of taps compared to that of the TDL-AAA. The ST-SPE can reduce the computational complexity of the space-temporal joint equalization and it works effectively under the minimum phase condition such as appeared at line-of-sight (LOS) propagation environments at a high antenna height base station. However the ST-SPE cannot work under a non-minimum phase condition caused under N-LOS (non-line-of-sight). On the other hand, the TDL-AAA whose reference signal is synchronized at the center tap (TDL-AAA_C) can work even in the non-minimum phase condition. In this paper, we propose a dual-mode space-temporal simultaneous processing equalizer (Dual-mode ST-SPE) which has a simple configuration and also works in non-minimum phase condition. The Dual-mode ST-SPE can reduce the computational complexity compared to the TDL-AAA_C. Yoshihiro Ichikawa received the B.E. degree in department of communication engineering, in National Defense Academy in 1995, and M.E. and D.E. degree from Ibaraki University in 2001 and 2004, respectively. He joined the Japan Air Self Defense Force in 1995. His research interests are an adaptive algorithm, an antenna design, and an adaptive array antenna. Shigeki Obote received his B.E., M.E. and D.E. degrees in electrical and electronic engineering from Tottori University, Tottori, Japan, in 1996, 1998 and 2000, respectively. Since 2000, he has been with department of media and telecommunications engineering, faculty of engineering, Ibaraki University, Ibaraki, Japan, where he is currently a associate professor. His research interests are in adaptive array antenna and wireless communications systems. Kenichi Kagoshima received the B.E., M.E. and D.E. degrees in electronics engineering from the Tokyo Institute of Technology, Tokyo, Japan, in 1969, 1971, and 1974, respectively. He joined the Nippon Telegraph and Telephone Corporation (NTT) Laboratory in 1974 and researched and developed many kinds of radio communication antennas. Since 1997, he has been a professor at Ibaraki University, Ibaraki, Japan. Dr. Kagoshima was a Secretary and Treasure, Vice Chairman, and Chairman of the IEEE AP-S Tokyo Chapter in 1992, 1993, and 1994, respectively. He was a chair of antennas and propagation professional group of IEICE in 1999 and 2000. In 1973, he received the Yonezawa Prize for Young Engineers and 1998, best paper award from IEICE, respectively.     

A fast first-order optimization approach to elastoplastic analysis of skeletal structures

It is classical that, when the small deformation is assumed, the incremental analysis problem of an elastoplastic structure with a piecewise-linear yield condition and a linear strain hardening model can be formulated as a convex quadratic programming problem. Alternatively, this paper presents a different formulation, an unconstrained nonsmooth convex optimization problem, and proposes to solve it with an accelerated gradient-like method. Specifically, we adopt an accelerated proximal gradient method, that has been developed for a regularized least squares problem. Numerical experiments show that the presented algorithm is effective for large-scale elastoplastic analysis. Also, a simple warm-start strategy can speed up the algorithm when the path-dependent incremental analysis is carried out.     

Sol-gel synthesis of high-humidity-sensitive amorphous P2O5-TiO2 films

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

A new detection method for the primary cosmic heavy nuclei by the plastic track detector CR-39

A new multiple scanning method is developed and applied to detect cosmic heavy nuclei. The plastic track detectors CR-39 exposed to cosmic heavy nuclei are over-etched in 8.0N NaOH for 94 h at 80°C. We found that the etched cones can easily be scanned on the plastic plates without using an optical microscope. The trajectories of heavy nuclei can be reconstructed with the naked eyes by superposing four or more over-etched plates. The charge detection threshold is obtained by this method, and appears to be 10. The charge resolution is estimated to be 1.0 charge units for iron nuclei. By adopting this method, the scanning time is much shortened and CR-39 plastic chamber size can easily be scaled up. The method is very useful for detecting particles with low flux intensity, like for searching magnetic monopoles or for measuring the high energy spectra of cosmic heavy nuclei.     

Response function estimation with fine energy bins for the energy-resolved computed tomography using a transXend detector

A new ‘transXend’ detector system has been developed for energy-resolved computed tomography (CT). It consists of several segmented detectors that measure X-rays as electric currents. Response functions of segmented detectors are estimated using component materials of a body under inspection to unfold X-ray spectra. To avoid material-dependent measurements, response functions inherent to segmented detectors are evaluated by Monte Carlo calculations. CT was performed for a phantom consisting of five resins and was analyzed by the estimated response functions. The linear attenuation coefficients for the five resins have excellent agreement with database values.