Characterization of the Oxide Scale Formed on T12 Water Wall Tube After Long-term Service in Supercritical Power Plant

Oxidation of Metals - Oxide scale control is one of the critical maintenance issues in fossil fuel power plant. Hence, the water treatment of the feed water has been changed from all-volatile...     

Effect of sweep gas species on tritium release behavior from lithium titanate packed bed during 14 MeV neutron irradiation

In a fusion reactor, the prediction of tritium release behavior from breeder blanket is important to design the tritium recovery system, but the amount of tritium generated is necessary information to do that. Hence, tritium generation and recovery studies on lithium ceramics packed bed have been started by using fusion neutron source (FNS) in Japan Atomic Energy Agency (JAEA). Lithium titanate (Li₂TiO₃) was selected as tritium breeding material, and its packed bed was enclosed by the beryllium blocks, and was kept at certain temperature during fusion neutron irradiation. During irradiation, the packed bed was purged with the sweep gas continuously, and tritium released was trapped in each gas absorber selectively by chemical form. In this work, the effect of sweep gas species on tritium release behavior was investigated. In the case of sweep by helium with 1% of hydrogen, tritium in water form was released sensitively corresponding to the irradiation. This is due to existence of the water vapor in the sweep gas. On the other hand, in the case of sweep by helium without water vapor, tritium in gaseous form was released first, and release of tritium in water form was delayed from gaseous tritium and was gradually increased.     

Variations in polymeric structure of ferroelectric poly(vinylidene fluoride) films during annealing at various temperatures

To clarify the thermal degradation mechanisms of uniaxially drawn poly(vinylidene fluoride) (PVDF) films, variations due to annealing in the polymeric structures of the films were investigated using the small‐angle X‐ray scattering (SAXS) and Fourier transform infrared (FTIR) spectroscopy. The films were composed of lamellar crystals that were stacked perpendicular to the stretch direction. Although the crystallinity of the films decreased during annealing in the temperature range above the preannealing temperature, the lamellar structure was maintained even after the annealing process. There are two kinds of irreversible relaxation mechanisms during the annealing process of the films, including both a decrease in crystallinity within the lamellae and also thickening of the lamellae. A significant lamella thickening effect was observed when the films were annealed above ～ 100°C. FTIR spectra suggested some disordered structures are developed during thickening of the lamellae. Furthermore, a long‐range periodic structure was formed in the films that were annealed above the melting temperature of PVDF. The polymeric structures formed during the fabrication process (including high‐order structures and disorders in molecular conformation) were clarified as having a significant influence on the annealing behavior of ferroelectric PVDF films. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of impact energy on the impact-wear properties of low carbon high manganese alloy steels in corrosive conditions

The impact-wear properties of low carbon high manganese alloy steel were tested under three different impact energies (0.7 J, 1.2 J and 1.7 J) using a modified MLD-10 wear tester. SEM inspection of the wear surface and subsurface optical metallographic analysis reveal the impact wear mechanism. Under corrosive conditions we observe a shift from single micro-cutting to impact-flaking, after the appearance of vertical section micro-cracks, while at higher impact energies fatigue corrosion and abrasion are observed.     

A study on the energy performance of a cooling plant system: Air-conditioning in a semiconductor factory

This paper will focus on the energy performance evaluation of a cooling plant system in a semiconductor factory. Several energy saving technologies namely: integrated cooling towers, free cooling systems, control of the chilled water quantity, etc., have been adopted to improve efficiency of the cooling plant system. We have collected actual operating data for 2 years and evaluated the performance of chillers’ COP and the whole cooling plant system's COP and they showed satisfactory results even if the thermal load of the factory was about half compared with design phase assumption.

We also have verified each effect of the energy saving technologies through model-based simulation analysis. The annual electric power consumption dropped about 35% compared to conventional cooling plant systems in case of design phase thermal load. And the faulty status operation of the chiller's number control miss occurred while we monitored. Electric power consumption increased about 17% compared to normal status operation at the same period.     

Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry     

Adjunctive Application of Antimicrobial Photodynamic Therapy in Nonsurgical Periodontal Treatment: A Review of Literature

Periodontal disease is caused by dental plaque biofilms, and the removal of these biofilms from the root surface of teeth plays a central part in its treatment. The conventional treatment for periodontal disease fails to remove periodontal infection in a subset of cases, such as those with complicated root morphology. Adjunctive antimicrobial photodynamic therapy (aPDT) has been proposed as an additional treatment for this infectious disease. Many periodontal pathogenic bacteria are susceptible to low-power lasers in the presence of dyes, such as methylene blue, toluidine blue O, malachite green, and indocyanine green. aPDT uses these light-activated photosensitizer that is incorporated selectively by bacteria and absorbs a low-power laser/light with an appropriate wavelength to induce singlet oxygen and free radicals, which are toxic to bacteria. While this technique has been evaluated by many clinical studies, some systematic reviews and meta-analyses have reported controversial results about the benefits of aPDT for periodontal treatment. In the light of these previous reports, the aim of this review is to provide comprehensive information about aPDT and help extend knowledge of advanced laser therapy.     

Physicochemical characteristics of rapidly dried onion powder and its anti-atherogenic effect on rats fed high-fat diet

Rapidly dried onion (Allium cepa L. cv. Momiji No. 3) powder (OP) prepared from the outer layers (from second to fourth scale leaves from the surface) of onion bulbs was analysed for its quercetin and polyuronide contents, the effects of enzymatic treatment and the anti-atherogenic effect on rats fed a high-fat diet. Quercetin 4′-glucoside (50%), free quercetin (30%) and quercetin 3,4′-diglucoside (20%) were identified as quercetin derivatives, and boiling-water extraction was effective in extracting these compounds. OP contained 12.9% of polyuronides, the basic skeleton of pectin. Enzymatic degradation (cellulase and pectinase, 50 °C for 12 h, pH 6.0) of OP was effective in obtaining a slurry of smaller particle sizes. The free quercetin increased and the glucosides decreased with enzyme treatment. In Wistar rats fed an OP-added high-fat diet, the total cholesterol, HDL-cholesterol and triglyceride concentrations were not significantly different from the rats fed a high-fat diet without OP. However, the atherogenic index (AI) of Wistar rats fed an OP-added high-fat diet was lower (AI = 3.3) than rats fed the diet without OP (AI = 4.1). The incremental elastic modulus (IEM) of the aorta from rats fed the OP-added diet was also significantly lower than that of the rats fed the diet without OP. The AI and IEM values of the rats fed the OP-added diet were quite similar to the values of rats fed the diet without OP but were allowed spontaneous exercise. These results suggest that OP intake is effective for decreasing the risk of arteriosclerosis.     

Effect of Moisture on the High-Temperature Stability of Unidirectionally Solidified Al2O3/YAG Eutectic Composites

The corrosion resistance of a unidirectionally solidified alumina/yttrium aluminum garnet (Al₂O₃/YAG) eutectic mixture was investigated at high temperature. Samples were exposed to high temperature (1200°–1800°C) in different atmospheres, which included argon, argon/water vapor, air, and air/water vapor. The most important microstructural changes occurred at the interface between the YAG and the Al₂O₃. Those changes consisted of localized thermal grooving, especially when the corrosive atmosphere contained water vapor. The samples exhibited significant weight loss at high temperature (1800°C) after 20 h of exposure. The calculated volume gain that was induced by the increased surface relief was low and limited, except when the corrosive atmosphere contained air, which indicated that the presence of air (particularly oxygen) induced a more-active corrosion process. On the other hand, no change in the flexural strength was observed, even after 100 h at 1800°C in a humid atmosphere, because of the cross-linked structure of the composite, which limited propagation of the groove.     

Numerical Simulation of Solidification Process on Single Crystal Ni-Based Superalloy Investment Castings

Bridgman directional solidification of investment castings is a key technology for the production of reliable and highly efficient gas turbine blades. In this paper, a mathematical model for three-dimensional （3D） simulation of solidification process of single crystal investment castings was developed based on basic heat transfer equations. Complex heat radiation among the multiple blade castings and the furnace wall was considered in the model. Temperature distribution and temperature gradient in superalloy investment castings of single blade and multiple ones were investigated, respectively. The calculated cooling curves were compared with the experimental results and agreed well with the latter. It is indicated that the unsymmetrical temperature distribution and curved liquid-solid interface caused by the circle distribution of multiple turbine blades are probably main reasons why the stray grain and other casting defects occur in the turbine blade.