Finite element stress analysis and strength evaluation of epoxy-steel cylinders subjected to impact push-off loads

The stress wave propagations and stress distributions in epoxy-steel cylinders in which the outside surface of a solid cylinder (steel) is adhered to the inside surface of a hollow cylinder (epoxy resin) subjected to impact push-off loads were analyzed using the finite element method (FEM). The impact push-off loads were applied to epoxy-steel cylinders on a solid cylinder by dropping a weight. The FEM code employed was ANSYS/LS-DYNA. It was found that the maximum principal stress occurs at the upper edge of the interface, where the rupture initiates in epoxy-steel cylinders under the impact push-off loads. Besides, it was also found that the normal stress near the upper edge of the interface increases as the rigidity and the initial impact velocity increase; meanwhile it decreases as the diameter and the height of the solid cylinder increase. The strength of epoxy-steel cylinders increases as the rigidity of the solid cylinder increases, and the diameter and the height of the solid cylinder decrease. In addition, it was observed that the characteristics of the joints subjected to the impact push-off loads are opposite to those of the joints subjected to the static push-off loads. Furthermore, experiments were carried out to measure the strain response of epoxy-steel cylinders subjected to impact and static push-off loads. Fairly good agreements were observed between the numerical and the measured results.     

TEM/STEM Observation of ZrC Coating Layer for Advanced High-Temperature Gas-Cooled Reactor Fuel, Part II

The Japan Atomic Energy Agency (JAEA) has started to study and develop zirconium carbide (ZrC)-coated fuel particles for advanced high-temperature gas-cooled reactors. The ZrC coating layer has been fabricated at JAEA by chemical vapor deposition using a pyrolytic reaction of zirconium bromide. The microstructures of the ZrC layers, whose nominal deposition temperatures could be measured and controlled during the deposition process, were characterized by means of TEM and STEM. In the present study, three batches were prepared and compared with each other as well as the previous batches. The crystallographic orientation of ZrC with regard to the growth direction in the ZrC layers deposited at a constant temperature of 1630 K was different from that deposited at varying temperatures in the 1493–1823 K range. A thin layer of turbostratic carbon was observed at the boundary between pyrolytic carbon and ZrC in particles deposited at the highest temperature among those used in this study (the nominal temperature was 1769 K); no such structure was found in a batch deposited at a lower temperature (the nominal temperature was 1632 K). Therefore, precise control of temperature is shown to be critical to the formation of good ZrC coatings.     

Synthesis of Pd-Sn nanoparticles by ultrasonic irradiation and their electrocatalytic activity for oxygen reduction

Nanoparticles of Pd-Sn were prepared under various conditions by applying ultrasonic irradiation, and their electrocatalytic activity for oxygen reduction was evaluated in 0.5 M KOH. The average size of Pd-Sn nanoparticles thus prepared was about 3-5 nm. The Pd in Pd-Sn nanoparticles was found to be mostly in the metallic state. The electrocatalytic activity of the Pd-Sn nanoparticles for the oxygen reduction reaction (ORR) is greater than Pt or Pd nanoparticles in alkaline media. The molar ratio of Pd to Sn metal ions in the synthesizing solution, their initial concentrations, the concentration of ethanol, which increases primary hydrogen radicals during sonolysis, and the concentration of citric acid were found to affect the size distribution of the Pd-Sn nanoparticles, and therefore, those factors controlled the electrocatalytic activity for ORR. Particularly, the concentration of citric acid was found to be important for controlling the surface property on Pd-Sn particles to adjust the electrocatalytic activity for ORR.     

Core business concentration vs. corporate diversification in the US electric utility industry: Synergy and deregulation effects

Many economists such as Wilson (2002) [Wilson, R., 2002. Architecture of power market, Econometrica, 70, 1299–1340] have considered that there are similarities between electricity and gas services in the US electric utility industry. Hence, they expect a synergy effect between them. However, the two businesses do not have technology similarities at the level that the gas service produces a synergy effect with electricity. To examine whether there is a synergy effect of corporate diversification in the industry, we compare electricity-specialized firms with diversified utility firms in terms of their financial performance and corporate value. The comparison indicates that core business concentration is more effective for electric utility firms than corporate diversification under the current US deregulation policy.     

Effect of filler concentration on electrical conductivity andultralow-frequency dielectric properties

The effect of filler concentration on the dielectric properties in the ultralow-frequency region and on the electrical conductivity was studied for ethylene propylene rubber. First, we investigated the relation between the electrical conductivity and filler concentration: as the volume fraction of fillers q_a increased, the conductivity decreased in the low filler concentration region but increased abruptly in the high filler concentration region. The decrease and increase in conductivity can be explained with the action of carrier traps at the interface between EPR and fillers and with the formation of highly conductive paths of filler across the sample, respectively. Secondly, we studied the dielectric properties in the ultralow-frequency region which was obtained from the discharge current. As q_a increased, the relaxation time decreased in the low filler concentration region and then rose in the high filler concentration region. The polarization in the high filler concentration region can be explained by two-layer interfacial polarization between filler and rubber     

Determination of free fatty acids in milk and dairy products by reversed-phase HPLC with fluorescence detection

A highly sensitive HPLC with fluorescence detection was developed for the determination of free fatty acids (FFAs) in milk and dairy products. For this purpose, the FFAs were extracted from small amounts of milk (1.0 mL), cheese (0.5 g) and butter (0.5 g) using Sep-Pak cartridge columns, and then derivatized to 9-anthrylmethyl esters with 9-anthryldiazomethane (ADAM). Good separations of the ADAM derivatives of 16 FFAs (C4-C18) that exist in milk, cheese and butter, which permitted quantitative estimation of their individual FFAs, were achieved by HPLC on a C18 column (Cadenza CD-C18, 150 x 3 mm i.d.) using gradient elution with methanol and water. The acid values calculated from the contents of individual FFAs were in good agreement with those obtained by the conventional titration method. These results demonstrate that the present HPLC method is simple, sensitive and precise, and could be utilized widely for determination of the FFAs in milk and dairy products.     

Molecular recognition by wall-assembling-type nanocavity in aqueous media

Steroid cyclophanes, each having a macrocyclic ring attached to four bile acid moieties via chiral lysine connectors, were synthesized, and the binding of the 2-naphthylphenylketone (guest) to the steroid cyclophanes in water was investigated. The circular dichroism spectra of the steroid cyclophane with cholic acid and L-lysine were significantly affected by the binding of the guest, and the induced circular dichroism based on the absorption of the achiral guest was also observed. The binding of the guest to the steroid cyclophane with cholic acids and D-lysines induced changes in the circular dichroism spectra with the opposite sign of the molecular ellipticities. An induced circular dichroism spectral change was not observed upon binding of the guest to the analogous host without OH sites. These results strongly suggest that the guest is conformationally fixed through hydrogen bonding between the carbonyl group of the guest and the steroidal hydroxyl group of the host. The assembly of only four steroid residues on the macrocyclic ring probably provided a hydrophobic nanocavity for hydrogen bonding.     

Disturbance-free high-speed sinusoidal phase-modulating laser diode interferometer

A surface profiler that incorporates a feedback controller to eliminate external disturbances is proposed and demonstrated. Its overall performance is dependent on the frequency response of the feedback loop. The frequency of the modulating signal strongly influences the response of the feedback controller. When we used the integrating-bucket method, the CCD camera had to be operated at a low-frequency video rate. Our technique uses a CCD camera equipped with an electronic shutter. The shutter function enables us to apply high-speed sinusoidal phase modulation to the conventional integrating-bucket method under the standard video rate.     

Synchronized fresh cell bioreactor system for continuous L-(+)-lactic acid production using Lactococcus lactis IO-1 in hydrolysed sago starch

An efficient bioreactor, termed a 'synchronized fresh cell bioreactor', was developed and consisted of a pH-dependent substrate feed system coupled with cross flow filtration and turbidity control. The effect of high dilution rate and high cell density coupled with high cell viability on the production of l-lactic acid in continuous culture by Lactococcus lactis IO-1 in enzyme-hydrolysed sago starch medium was investigated. For all changes in dilution rate, cells responded in a synchronized way to the addition of glucose by increasing the rate of biomass formation. Consequently, a glucose-free feed solution was required to maintain the cell concentration at a particular pre-set value. This set-up facilitated the maintenance of the cells in a permanent log phase. At a cell concentration of 15 gl(-1) and a feed glucose concentration of 53 gl(-1), volumetric LA productivities of 8.2, 19.3 and 33.1 gl(-1)h(-1) were obtained at dilution rates of 0.21, 0.50 and 1.1 h(-1), respectively. The respective residual glucose concentrations in the spent medium were 1.90, 0.24 and 3.80 gl(-1). By increasing the cell density, the volumetric productivity increased proportionally. At high cell density, higher dilution rates resulted in lower lactate concentrations in the culture medium resulting in higher productivity. This reactor facilitated efficient operation with high cell viability by maintaining the cells in continuous growth phase for long-term fermentation. Therefore, the growth rate (mu) was calculated according to the Monod equation. Using this system, high specific productivities can be obtained which guarantees high commercial productivity at economical cost with only a small investment for setting up the sago industry.     

Inhibition of intimal hyperplasia after vein grafting by in vivo transfer of human senescent cell-derived inhibitor-1 gene

OBJECTIVE: To define the distribution and determinants of cardiovascular disease events among participants undergoing long-term antihypertensive therapy, and to stratify them into risk groups on the basis of pretreatment clinical profiles. DESIGN: A prospective cohort study of participants in a worksite-based antihypertensive treatment program in New York city (1973-1994). PATIENTS: We studied 8690 systematically treated patients who had at least 6 months of follow-up (average of 5.7 years) and, at entry, had had a systolic blood pressure of > or = 160 mmHg or a diastolic blood pressure of > or = 95 mmHg (after 1992 > or = 140/90 mmHg), or had been being administered antihypertensive medication. MAIN OUTCOME MEASURES: Blood pressure and incidence of morbid and mortal cardiovascular events. RESULTS: Blood pressure control (to 140 +/- 3/87 +/- 7 mmHg) was achieved by the first year and maintained through 18 years of therapy. In nearly 50,000 person-years of follow-up, there were 468 cardiovascular disease events [myocardial infarction including revascularization (282), strokes (93), congestive heart failure (30) and other cardiovascular deaths (63)]. Deaths from cardiovascular disease events accounted for 68% of all deaths. Myocardial infarction was most common throughout, but congestive heart failure incidence surpassed stroke incidence after 10 years. A scheme for risk stratification was constructed after analysis of the independent association of baseline factors and incident cardiovascular events. Upon the basis of ease of ascertainment and their demonstrated associations with occurrence of cardiovascular disease during treatment, we selected five pretreatment factors (history of heart attack, stroke, diabetes, age > or = 55 years and pulse pressure > or = 60 mmHg) to stratify patients into four groups. Those with no risk factor had a low risk (n=2999), those with one had a moderate risk (3042), those with two had a high risk (2237), and those with three or more had a very high risk (412). Overall, the unadjusted rates of incidence of cardiovascular disease events per 1000 person-years for patients in very high and low risk groups differed by factors of six and 14 for men and women, respectively. CONCLUSION: These results demonstrate that long-term control of blood pressure can be achieved in a general population. Nevertheless, cardiovascular disease events still accounted for most morbidity and mortality among these 'recovered' hypertensive patients. At entry, on the basis of readily identifiable characteristics, it was possible to stratify patients according to likelihood of subsequent events occurring despite control of blood pressure. This scheme could provide the basis for targeting more aggressive therapy where the potential for further cardioprotection is greatest.