Polymerization of styrene with a simple rare earth metal initiator

The catalytic activity in the polymerization of styrene has been examined using commercially available simple rare earth metal compounds such as Sm(OiPr)₃, Sm(acac)₃, Sm(OCOMe)₃, SmI₂(THF)₂ or SmCl₃ coupled with Et₃Al or methylaluminoxane (MAO). Among these compounds, the Sm(OiPr)₃/AlEt₃ system shows the highest catalytic activity, especially in the presence of a minor amount of toluene at 60 °C. The random copolymerization of styrene with methyl methacrylate suggests that the present polymerization proceeds with a radical polymerization mechanism. (C₅Me₅)SmCl₃Na(THF) and (C₅Me₅)SmCl₃Li(THF) systems exhibit relatively low catalytic activity, even in the presence of AlEt₃. © 2001 Society of Chemical Industry     

Effects of PbTiO 3 Seed Layer on the Characteristics of RF-Sputtered Pb(Zr 0.5 ,Ti 0.5 )O 3 Thin Films

The effects of seed layers on the characteristics of rf-sputtered lead zirconium titanate thin films were investigated. Prior to sputtering, PbTiO 3 seed layers (100 nm) were deposited onto the Pt/Ti/Si and Pt/Si substrates by sol-gel (spin coating) processing method. Structure-property relation was studied as functions of substrate temperature and sputtering conditions. Special efforts were given in optimizing the deposition parameters to prepare the films in the perovskite phase without post deposition annealing. Dielectric constant and loss tangent of the films were in the range 800-950 and 0.04 -0.06, respectively. Remanent polarization and coercive field were 23.1 w C/cm 2 and 75kV/cm, respectively, for the films without PbTiO 3 seed layer, where as the corresponding quantities for in situ -deposited perovskite Pb(Zr, Ti)O 3 films on PbTiO 3 seed layer were 28 w C/cm 2 and 65 kV/cm, respectively.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.     

In vitro formation and thermal transition of novel hybrid fibrils from type I fish scale collagen and type I porcine collagen

Novel type I collagen hybrid fibrils were fabricated by neutralizing a mixture of type I fish scale collagen solution and type I porcine collagen solution with a phosphate buffer saline at 28 °C. Their structure was discussed in terms of the volume ratio of fish/porcine collagen solution. Scanning electron and atomic force micrographs showed that the diameter of collagen fibrils derived from the collagen mixture was larger than those derived from each collagen, and all resultant fibrils exhibited a typical D-periodic unit of ∼67 nm, irrespective of volume ratio of both collagens. Differential scanning calorimetry revealed only one endothermic peak for the fibrils derived from collagen mixture or from each collagen solution, indicating that the resultant collagen fibrils were hybrids of type I fish scale collagen and type I porcine collagen.     

Preliminary spectrum shifter design for intermediate energy nuclear data benchmark experiments with DT neutrons

Integral benchmark experiments with DT neutrons are not always sufficient for nuclear data benchmarking in the MeV region, below 10 MeV. A neutron spectrum shifter, which will be placed between a sample and a DT neutron source, is effective to moderate DT neutrons incident to the sample. In order to estimate effects of the spectrum shifter, the ratio of the contribution of 14 MeV neutrons in the leakage neutron and gamma-ray spectra was calculated with MCNP-4C for an experimental configuration at FNS of JAEA, Japan. The calculations were carried out for a Li₂TiO₃ sample with a Be, D₂O, or ⁷LiD spectrum shifter. It was found out that the Be shifter was superior to others and the Be shifter was effective to decrease the contribution of 14 MeV neutrons especially for secondary gamma-ray spectrum measurements.     

Decay of material properties of degraded MEA caused by repeated cold starts under subzero conditions in polymer electrolyte fuel cells

This study investigated the characteristics of cell performance degradation, decline of component performance, and changes in the properties of membrane electrode assembly materials caused by repeated cold starts under a subzero condition of ?30 °C. It was made clear that functional decay appeared mainly at the cathode due to increased proton conductive impedance and reduction of reactivity of the electrode catalyst. Among the cathode components, an increase in proton conductive impedance in the cathode electrolyte was dominant. Furthermore, the application of ion chromatography and a newly developed proton‐induced gamma‐ray emission method to measure fluorine in the off‐gas drain revealed that decomposition of the electrolyte was dominant in the cathode catalyst layer. A decrease in fluorine in the cathode electrolyte measured by fluorine‐19 nuclear magnetic resonance confirmed this decomposition. A hypothesis is also presented concerning the cause of the performance degradation. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20394     

Treatment capability of an up-flow anammox column reactor using polyethylene sponge strips as biomass carrier

The feasibility of applying a polyethylene (PE) sponge as a biomass carrier in an anaerobic ammonium oxidation (anammox) reactor and its nitrogen removal performance were also investigated. Experiments were carried out in an up-flow column reactor with synthetic inorganic wastewater. Experimental results indicate that reactor containing PE sponge biomass carriers showed a high nitrogen removal capability and exhibited stable performance. In addition, the reactor with 8 strips PE sponge as biomass carrier exhibited greater adaptation capacity compared to that with 6 strips and could achieve a high TN removal rate within a very short period. The ratio of NO₂-N removal and NO₃-N production to NH₄-N removal for the reactor was 1.26:0.21. Furthermore, to investigate the bacterial composition of the mature community, 16S rRNA sequences were amplified by PCR and analyses were conducted using DNA databases. Results showed that a new kind of anammox microorganism (Kumadai-1) was the dominant species in the reactor when using PE sponge as a biomass carrier.     

Synthesis of Pd-Sn nanoparticles by ultrasonic irradiation and their electrocatalytic activity for oxygen reduction

Nanoparticles of Pd-Sn were prepared under various conditions by applying ultrasonic irradiation, and their electrocatalytic activity for oxygen reduction was evaluated in 0.5 M KOH. The average size of Pd-Sn nanoparticles thus prepared was about 3-5 nm. The Pd in Pd-Sn nanoparticles was found to be mostly in the metallic state. The electrocatalytic activity of the Pd-Sn nanoparticles for the oxygen reduction reaction (ORR) is greater than Pt or Pd nanoparticles in alkaline media. The molar ratio of Pd to Sn metal ions in the synthesizing solution, their initial concentrations, the concentration of ethanol, which increases primary hydrogen radicals during sonolysis, and the concentration of citric acid were found to affect the size distribution of the Pd-Sn nanoparticles, and therefore, those factors controlled the electrocatalytic activity for ORR. Particularly, the concentration of citric acid was found to be important for controlling the surface property on Pd-Sn particles to adjust the electrocatalytic activity for ORR.     

Core business concentration vs. corporate diversification in the US electric utility industry: Synergy and deregulation effects

Many economists such as Wilson (2002) [Wilson, R., 2002. Architecture of power market, Econometrica, 70, 1299–1340] have considered that there are similarities between electricity and gas services in the US electric utility industry. Hence, they expect a synergy effect between them. However, the two businesses do not have technology similarities at the level that the gas service produces a synergy effect with electricity. To examine whether there is a synergy effect of corporate diversification in the industry, we compare electricity-specialized firms with diversified utility firms in terms of their financial performance and corporate value. The comparison indicates that core business concentration is more effective for electric utility firms than corporate diversification under the current US deregulation policy.     

Determination of free fatty acids in milk and dairy products by reversed-phase HPLC with fluorescence detection

A highly sensitive HPLC with fluorescence detection was developed for the determination of free fatty acids (FFAs) in milk and dairy products. For this purpose, the FFAs were extracted from small amounts of milk (1.0 mL), cheese (0.5 g) and butter (0.5 g) using Sep-Pak cartridge columns, and then derivatized to 9-anthrylmethyl esters with 9-anthryldiazomethane (ADAM). Good separations of the ADAM derivatives of 16 FFAs (C4-C18) that exist in milk, cheese and butter, which permitted quantitative estimation of their individual FFAs, were achieved by HPLC on a C18 column (Cadenza CD-C18, 150 x 3 mm i.d.) using gradient elution with methanol and water. The acid values calculated from the contents of individual FFAs were in good agreement with those obtained by the conventional titration method. These results demonstrate that the present HPLC method is simple, sensitive and precise, and could be utilized widely for determination of the FFAs in milk and dairy products.